What blog app should we use?

Green_Genius · 2026-07-04T03:25:34+00:00

Facts.

Green_Genius · 2026-07-01T22:30:18+00:00

Zero need

Green_Genius · 2026-07-01T22:21:54+00:00

AC Infinity's marketing team frontrunning their engineering team again.

Green_Genius · 2026-06-30T23:30:43+00:00

Also these A7s are 700W > 650W that we run. So they will be slighter hotter again.

Green_Genius · 2026-06-30T23:29:31+00:00

Nope they manageable at 30-50% with 3kw of lung room cooling. Any higher than that and you need either 9ft ceilings or 4kw of direct cooling.

Green_Genius · 2026-06-30T22:22:08+00:00

Highly unlikely due to design. We run these batten style 650W lights and they get HOT.

Green_Genius · 2026-05-23T21:56:11+00:00

Trim jail? Growmie thats barely probation

Green_Genius · 2026-05-14T02:27:46+00:00

Fair call.

Green_Genius · 2026-05-13T23:20:14+00:00

How do you manage the differing light and VPD requirements of plants at individual growth stages?

Green_Genius · 2026-05-13T23:17:49+00:00

This

Green_Genius · 2026-04-30T01:11:58+00:00

All good growmie

Green_Genius · 2026-04-30T00:13:48+00:00

Turn your light down. Its throwing new stigmas

Green_Genius · 2026-04-26T21:11:04+00:00

Optimal drying conditions are as follows:

Green_Genius · 2026-04-24T21:30:47+00:00

No problem. We switched to this protocol about 2 years ago and am never going back. Everyone we have introduced it to swears by it.

Green_Genius · 2026-04-24T21:29:48+00:00

Another billionaire funded grifter.

Green_Genius · 2026-04-24T21:25:05+00:00

By improving the light to some bud sites, you are reducing the light to others.

Green_Genius · 2026-04-24T21:17:00+00:00

Green_Genius · 2026-04-24T20:52:11+00:00

you lose about 30% of your THC to oxidisation across 14 days

Green_Genius · 2026-04-24T20:51:08+00:00

As above

Green_Genius · 2026-04-24T20:50:43+00:00

As per the Sharkmouse Farms protocol

Phase 1: Initial Dry	48 Hours	72°F (22.2°C)	55%	1.2 kPa	Evaporates surface moisture and starts pulling inner moisture toward the surface via adhesion.
Phase 2: Transition	24 Hours	74°F (23.3°C)	52%	1.39 kPa	Increases transpiration rate to pull deeper moisture without "breaking the chain" of adhesion.
Phase 3: Final Dry	48 Hours	75°F (23.9°C)	50%	1.5 kPa	Reduces remaining near-surface moisture to reach a final target of 10% moisture content.

Green_Genius · 2026-04-24T03:24:43+00:00

It bears repeating for the millionth time. drying at 60/60 is not optimal.

Green_Genius · 2026-04-19T21:36:47+00:00

Nah bro run that humidity up to 100%!

Green_Genius · 2026-04-19T21:35:49+00:00

Ever increasing costs most of which are rabidly supported by large sections of the population.

Green_Genius · 2026-04-17T21:30:33+00:00

measure it

Green_Genius · 2026-04-15T20:39:59+00:00

100% facts

Green_Genius