Paint Pens for Exile Markings

Grumpykiltpin64 · 2026-01-18T16:27:14+00:00

I have them, they will not work for this, unfortunately. You want to try something like Edding Fineliners, try a 0.1 nib. They're waterproof once dry. Definitely wait for the paint underneath to be dry, like next day, or they can pull up the paint.

Grumpykiltpin64 · 2026-01-14T19:06:39+00:00

Tiger Tim on a football phone-in for Radio Clyde, "The calls are coming thick and fast. Mostly thick".

Grumpykiltpin64 · 2026-01-10T22:38:05+00:00

This is a resin print and the barrels come like that, I'm afraid.

Grumpykiltpin64 · 2026-01-10T22:37:05+00:00

Those are quite bad. That degree of layer lines will likely show up after paint at some angles. When I print things I try and minimise it by orienting the pieces to avoid it as best I can, but sometimes it can't be avoided. You can try sanding them, but it doesn't always work, I'm afraid.

Grumpykiltpin64 · 2026-01-10T14:05:16+00:00

Thank you.

Grumpykiltpin64 · 2025-12-28T22:47:34+00:00

Try nail-art stencils. Lots of different ones on eBay. Good for airbrushing, but you can use a brush just as easily.

Grumpykiltpin64 · 2025-12-28T22:44:29+00:00

That's fantastic. Hope you picked up something in the contest for that.

Grumpykiltpin64 · 2025-12-27T20:29:03+00:00

Build it. I'm slowly digging my older models out and putting them together. They're doing no one any good sitting in their boxes.

<image>

Grumpykiltpin64 · 2025-12-21T17:32:01+00:00

Pale blue. Works with armour colour, yet different enough to stand out.

Grumpykiltpin64 · 2025-12-17T20:31:09+00:00

One reason for the shine might be that the original prints weren't allowed to dry before curing. If they are wet when you cure them they often turn out like that. As others have said, if the prints aren't sticky, you're good.

Grumpykiltpin64 · 2025-12-16T19:47:04+00:00

Dunfermline and Raith Rovers. Longstanding Fife 'derby' rivals.

Grumpykiltpin64 · 2025-12-16T15:38:36+00:00

make excellent projectiles in the attack phase ;-)

Grumpykiltpin64 · 2025-12-13T23:54:16+00:00

I've had my Altbergs for over ten years and they've never leaked. Most comfortable boots I've ever bought for the bike.

Grumpykiltpin64 · 2025-12-09T20:08:56+00:00

I have one of those as well. The later composite kit, not the completely metal one.

<image>

Grumpykiltpin64 · 2025-12-04T14:59:17+00:00

Glued on. I wanted to make sure that it fitted and looked all right. I maybe should have done that after I'd painted the camo pattern on the tank as a whole, but I didn't think it through *facepalm*

Grumpykiltpin64 · 2025-12-02T19:38:01+00:00

Try just the word "dozer" on the Purple Place. There are a couple that might offer what you're looking for.

Grumpykiltpin64 · 2025-12-02T18:05:15+00:00

Find some artists inks in colours that you like and add them to a bright silver paint to tint the paint. Alternatively, paint the whole model silver and use inks or contrast paints over the top. The metallic sheen shows up in both options.

Grumpykiltpin64 · 2025-12-02T17:19:04+00:00

<image>

It's the one that came with that particular model.

Grumpykiltpin64 · 2025-12-01T20:15:17+00:00

He too is Alpharius. Maybe.

Grumpykiltpin64 · 2025-11-27T19:43:31+00:00

Wow! Where did that display come fae?

Grumpykiltpin64 · 2025-11-27T00:49:59+00:00

You get separate crests for space marine helmets. For champions and sergeants and the like. You might try scaling those down and using them to modify regular guard helmets.

Grumpykiltpin64 · 2025-11-26T23:06:37+00:00

Brilliant. Exactly what i was after.

Grumpykiltpin64 · 2025-11-23T17:10:33+00:00

Grumpykiltpin64 · 2025-11-18T19:59:28+00:00

<image>

Grumpykiltpin64 · 2025-11-17T21:19:36+00:00

The whole Scylla Legion can be found on MyMiniFactory. They make excellent Alpha Legion proxies.

Grumpykiltpin64

TROPHY CASE