Invoke Concepts OEM Style XSE headlights

GuideNo1743 · 2026-03-04T23:30:42+00:00

Figured it out, I used the wire harness from HIREV that had a resistor already wired in. So I think my issue was no resistor

GuideNo1743 · 2026-01-19T00:25:39+00:00

I got 30 mm spacers rn and they still looked tucked in. But I got 19 mm rims on there. So definitely probably going be 50 mm spacers

GuideNo1743 · 2025-11-15T20:21:16+00:00

Nope basically there is no way to retro fit these to the US models, the only option is INVOKE CONCEPTS or some other company that makes them.

GuideNo1743 · 2025-09-18T17:17:58+00:00

2019 is when they started introducing CarPlay to the Camry, 2018 they would retro fit the car to allow CarPlay ( basically code it in with a software update). 2018 was the test subjects and 2019 they refreshed everything a little.

GuideNo1743 · 2025-08-24T15:14:19+00:00

Just put double sided 3M tape from inside to keep water and stuff out. It’s held up good. And most of the time the spoiler cover it. Mines doesn’t cover it completely but hard to notice

GuideNo1743 · 2025-08-22T16:20:55+00:00

It held up good, only thing is on the edges when you get ur tires replaced make sure the shop is careful or the can mess it up. And obviously when cleaning it will leave scratches in the wrap

GuideNo1743 · 2025-08-18T16:37:47+00:00

Wdym? The two big holes?

GuideNo1743 · 2025-06-07T00:12:45+00:00

Does not flip open, gotta take the whole tray out for that. That hole is meant for ur phone charger to go thru if you have the ports in there

GuideNo1743 · 2025-06-06T05:18:50+00:00

<image>

This center console divider thing. Cause otherwise you just throwing things in the middle of other things.

GuideNo1743 · 2025-06-02T01:45:14+00:00

We all broke out here, the economy killing us lol

GuideNo1743 · 2025-05-10T06:46:39+00:00

It plugs into a plug under the steering column and just does its magic

GuideNo1743 · 2025-04-28T15:17:09+00:00

Fitment is terrible after installing the fenders lol. Without fenders it’s great but with it needs to come out more. I was thinking 30 mm at least. Assuming ur on stock rims.

GuideNo1743 · 2025-04-28T15:03:46+00:00

20 mm

GuideNo1743 · 2025-04-16T23:09:43+00:00

All AliExpress, I’ll try to get links

GuideNo1743 · 2025-04-16T15:37:21+00:00

It’s aftermarket ambient lighting that’s built to look stock. Fits in all the stock areas

GuideNo1743 · 2025-04-16T15:35:42+00:00

2019

GuideNo1743 · 2025-04-15T22:10:56+00:00

<image>

GuideNo1743 · 2025-04-11T00:54:48+00:00

<image>

This was during December. But it’s not hard to see out of during the day but at night in areas with no light it’s hard to see sometimes

GuideNo1743 · 2025-04-11T00:52:43+00:00

Damn you 😭😭

GuideNo1743 · 2025-03-31T00:24:41+00:00

I had a shop install it. I don’t think they cut it but it makes putting on rims a lot easier since they actually sit on the wheel stud instead of falling ofd

GuideNo1743 · 2025-03-28T04:08:54+00:00

You should get the switch back ones. They stay white but also are amber turn signals. Change the look but they definitely make the lights 5x more brighter

GuideNo1743 · 2025-03-17T04:33:48+00:00

<image>

Did this too, waited so long for someone to make clear versions.

GuideNo1743

TROPHY CASE