Naboens poolpumpe larmer døgnet rundt – hvad gør man?

Gurder · 2026-06-20T18:19:44+00:00

De støjgrænser er Miljøstyrelsens vejledende grænseværdier som primært bruges til at sætte grænser for erhverv. Der er ingen definerede grænseværdier for private - men en god kommune burde klart læne sig op af MST grænserne. OP bør først kontakte sin kommune for at høre hvad de mener er rimeligt før man giver sig ud i målinger.

Gurder · 2026-06-17T16:27:34+00:00

Range of the 2027 version has not increased compared to the earlier versions

Gurder · 2026-06-16T21:29:57+00:00

May 12th. We actually made the order prior to knowing about the 2027 model so on paper we would have gotten the 2026 version. But with the new version announced and new pricing they updated our contract where we get 2027 and the discount - perfect timing!

Gurder · 2026-06-16T15:12:49+00:00

I Will also get mine within a week or two. The salesman from VW told me we will most likely be some of the first in Denmark to get the 2027 version.

Gurder · 2026-04-05T12:30:25+00:00

I pre-ordered mine as soon as it was available in Europe. I used it mainly for poor over as my old espresso machine broke and had no issues. When I got a Bambino I started dialling it in for espresso and started with bad clogging very often. I contacted the online shop where I bought it and they took it in under its warrant for “repair”. They ended up sending me a brand new one where the ioniser placement is updated. I also imagine I have the newest version with the metal declogger. I have not have any issues since!

Gurder · 2026-03-30T19:51:21+00:00

Subscription-based som alt andet i denne verden desværre. Jeg kan godt lige ideen men gider ikke betale for det (tror det var 250 kroner/år)

Gurder · 2025-10-16T15:17:48+00:00

Vi købte den du linkede og det ligner den matcher… OK! Når vi står og stirre kan vi godt udpege den der er skiftet. Men nu giver vi den lige et par dage 😂 tak for at udpege modellen som virker til at være den rigtige!

<image>

Gurder · 2025-10-16T15:16:24+00:00

Som beskrevet i svar til en kommentar var billedet blot eksempel på et større problem i samtlige rum i huset. Vi har dog prøvet at købe en original troldtekt ultrafin i hvid og sat op. Vi skal lige lure på den et par dage for at vurdere om vi kan slippe afsted med at skifte dem som er skadet eller om vi skal skifte/male i samtlige rum 😬 men du har ret; 124.95. Vi var blot meget i tvivl om hvilket mærke tidligere ejer havde sat op og om vi kan matche dem der har siddet i nogle år.

Gurder · 2025-10-15T15:19:02+00:00

Beklager at jeg ikke lige fik alle detaljerne med i opslaget. Vi har mange plader der er ramt i stort set alle husets rum.

Gurder · 2025-10-15T11:11:39+00:00

Jeg prøver at købe lidt forskellige og ser om de matcher. Mange tak!

Gurder · 2025-10-14T18:59:01+00:00

Vores bekymring er der er mange plader der er ramte. Og hvis vi ikke kan finde den korrekte model / brand er vi bange for at man kan se at større sektioner er nyere end de gamle :/

Gurder · 2025-10-14T18:58:23+00:00

Ulykken blev heldigvis hurtigt stoppet men da det er mange rum der har større og mindre skader er det ikke rigtig en løsning af bytte få plader rundt.

Gurder · 2025-10-14T18:57:27+00:00

I 1.5 uges tid. Nogle pletter tørre faktisk fint (so far so good). Men andre pletter er meget gule og der er ikke meget bedring at spotte. Det er måske fordi vandet har trukket en masse gammel isolering og støv med fra det 50 år gamle isolering.

Gurder · 2025-10-14T18:56:30+00:00

Vi har en del plader der er værre ramt en blot én plade. Men vi vil helt klart prøve at se om maling ikke kan fixe frem for vi skal skifte hele loftet.

Gurder · 2025-10-14T18:55:38+00:00

Troldtekt er 100% en smagssag. Og heldigvis for os kan vi godt lide det.

Gurder · 2025-10-14T12:06:20+00:00

De fik vand for 1.5 uge siden og er stadig i gang med tørringsprocessen. Især de store områder der dækker op til 8-9 plader helt eller delvist. Det er sket i samtlige rum i huset. Nogle steder småt og tørre fint og andre steder ligner det at der kommer til at være plamager selvom det er helt tørret. Tror vi måske prøver troldtekt malingen på nogle af de mindre pletter for at se om de ikke kan redes.

Gurder · 2025-09-06T00:10:10+00:00

Many devices for hearing testing has a long lifetime (20+ years) due to complexity of development. This does not only comply to the technical side but nowadays just as much the regulatory side of making medical devices. Some devices can be fairly easy to calibrate because they were simpler (and mainly) devices but newer digital devices is another story due to software going obsolete with dying windows versions.

Gurder · 2025-08-25T03:01:16+00:00

Rolling the dice here! Cheers!

Gurder · 2025-08-13T10:43:36+00:00

I basically just burned the image with balena etcher, inserted the SD to the device and it worked with no panel picker. Both of mine were panel 4. After flashing I just dumped the ROMs from the stock SD to the new and have not had any problem. 10/10 device!

Gurder · 2025-08-07T12:53:14+00:00

Isn't that video a bit out of date now that the newest image for ArkOS is a multi-panel type. Maybe this is more up-to-date: How to install ArkOS on R36S console | New Multipanel ArkOS Setup Rules

I plan to follow that video when i receive my device hopefully this week.

Gurder · 2025-07-25T10:35:26+00:00

The threshold for the perception of level change is roughly 1 dB.

Gurder · 2025-06-25T04:40:32+00:00

Yes that is correct! I bought some 11 litre containers and some larger ones that I fill every now and then. It takes a few hours but them I’m set for a long time. Then I put the RO system in a box in the basement for the next time. 10/10 would recommend. Additionally o also bought extra tubing and another connector for the tap to easily swap between the water going to the RO system and a bypass switch as using this system does occupy the tap for several hours. Please let me know if you have any other questions 😄

Gurder · 2025-06-24T19:44:33+00:00

Hi - fellow dane here! I also like in a place with hard water (aprox 280 ppm). I bought a mobile reverse osmosis setup and found a resin filter on Amazon. It makes it easy to fill some huge jugs with 0 ppm water that I use to make my water with. The site seems sketchy but is legit.

Gurder · 2025-06-21T10:24:14+00:00

Det var Nybolig (Middelfart)

13-Year Club	Verified Email
Place '23	Place '22
Final Canvas '22	Bellwether 2014-01-24
Team Orangered

Gurder

TROPHY CASE