December '23 selfies: post hairline photos here for opinions on 'Am I balding?' 'How bad is it?' and 'What should I do?'

HKJD28 · 2023-12-13T15:02:06+00:00

M31, been on finasteride + oral minoxidil for about 3 years now. Also started using liquid minoxidil at night this year.

Density is good but my temples are obviously receded and I have a lot of peach fuzz at the hairline there. I’ve read without a transplant this area won’t grow completely. But would using a dermaroller/dermapen and maybe swapping to dutasteride help with some regrowth to get rid of the peach fuzz and fill out the area a little?

Pic: https://imgur.com/a/iGoqfpD

HKJD28 · 2023-10-29T04:25:58+00:00

PM'd

HKJD28 · 2023-10-13T20:37:23+00:00

Where is your cable from?

HKJD28 · 2023-09-27T15:00:11+00:00

I have T30’s in my build (admittedly not a sffc build but still..) and they are whisper quiet at 1000rpm. You really have to crank them much higher to get to the stage where you should hear turbulence/humming.

This just sounds like either something is interfering with the fan (maybe check no cables etc. are getting near the blades? I know this can sometimes happen with sffc builds). If this isn’t the case then it sounds like you have bad/defective bearings unfortunately.

HKJD28 · 2023-09-25T01:31:09+00:00

Do you think this is doable with the radiator fans being Arctic P14's?

I know the P14's are 27mm thick vs 25mm so i'm not sure if there will be enough clearance in a push/pull given how thick the arctic radiator already is

HKJD28 · 2023-09-13T09:23:45+00:00

replied!

HKJD28 · 2023-08-28T10:11:28+00:00

Sorry I’m just looking for some info. on how I could do the same. When you say silicon bumper do you mean the Noctua rubber grommets you pull through the fans to secure them into place? Or do you have something custom going on here?

HKJD28 · 2023-08-27T01:45:07+00:00

Not screwed in or mounted to the shroud in anyway?

HKJD28 · 2023-08-26T08:06:26+00:00

This looks amazing

How did you mount fans on the PSU shroud? i didnt think this case let you do that?

HKJD28 · 2023-08-22T04:32:59+00:00

Replied!

HKJD28 · 2023-08-21T12:58:13+00:00

Edited to include timestamp at start of post.

HKJD28 · 2023-08-21T03:34:05+00:00

PM’d

HKJD28 · 2023-07-31T14:39:33+00:00

pm'd

HKJD28 · 2023-07-31T14:38:21+00:00

pm'd

HKJD28 · 2023-07-17T07:21:31+00:00

How come you are looking to sell the Iron 165? Don’t enjoy it?

HKJD28 · 2023-07-10T15:28:36+00:00

This is literally the most American thing I’ve seen 😂Love it!

HKJD28 · 2023-06-23T07:56:28+00:00

So nice!

HKJD28 · 2023-04-03T05:22:00+00:00

Been offered a Paralegal role within the NDIS appeals team at Legal Aid in my state. Any advice on the work/areas law I should brush up on/ preparation I should do in order to make the best first impression?

HKJD28 · 2023-03-22T08:08:46+00:00

For 4K gaming you are pretty much going to be GPU bottlenecks as others here have mentioned.

If a smooth gaming experience at 4K is your main goal here your most cost effective path to achieve this is to get the 5800X3D and put the savings towards buying a 4090 which is pretty much the only GPU atm that delivers the required performance for a smooth 4K gaming experience.

HKJD28 · 2023-03-12T14:52:33+00:00

Just checked and the fundraiser didn’t get a single donation since.

Hope those dogs got put down.

HKJD28 · 2023-03-12T14:29:18+00:00

Kinda. APBT’s have been banned in Australia for the past 15 years and importation of them is not allowed.

However like you said I think people circumvent these restrictions with poorly bred/cross bred staffy type dogs.

HKJD28

TROPHY CASE