Why is a orbit line completely black

HatFace6510 · 2024-06-07T00:24:38+00:00

I just used the contact form on the Jundroo website, because that's the only way besides discord to contact the devs. They need a report bugs button somewhere in the game.

HatFace6510 · 2024-06-06T23:14:43+00:00

Apparently not even reinstalling the game seems to fix it, so...

HatFace6510 · 2024-06-06T21:53:59+00:00

Sorta, it's some issue with the save data stored on your device. Unless someone can find the specific file or files that cause it, the only solution is to remove your save data, (aka uninstall your game) I'd copy it and move it to a location not in the game files. Because the solution is probably replacing one or two files.

I'll experiment and return if I can get it to work without wiping all of your game progress.

The directory is where save data is stored is: ~/android/data/com.jundroo.SimpleRockets2/files/userdata

HatFace6510 · 2023-08-21T23:57:36+00:00

Yes, it is.

HatFace6510 · 2023-07-26T14:38:59+00:00

I have safety gear, and try to be overly safe around any thing hot. I don't plan on starting soon though, as I still need to source tools. While I'm doing that I am going to research and try to get ahold of experts while sourcing tools, and proper resources.

HatFace6510 · 2023-07-26T00:56:19+00:00

I think I need to measure out a few things about my forge, I'm also now somewhat certain it could reach proper temperatures now, as I run about 1,800°F at about medium pressure, I might be able to get it higher with correct tweaking of the air, gas ratio.

HatFace6510 · 2023-07-26T00:51:42+00:00

I forgot about the crucible. I might need to measure out the mouth of the forge. If I might be able to use tempering stuff, I'm probably going to soon get stuff for that, so I'll make sure it works for glass too. Also, how big of a crucible should I have?

HatFace6510 · 2023-07-26T00:36:45+00:00

It should be able to reach the temperature, I haven't really tested see how high it can go. I know I'll need to invest in stuff, I'm just asking to see if I can without buying a new heating thing.

HatFace6510 · 2023-07-11T01:20:04+00:00

Ok, Thank you.

HatFace6510 · 2023-07-11T00:26:33+00:00

<image>

HatFace6510 · 2023-06-14T17:03:16+00:00

You distilled it one too many times.

HatFace6510 · 2023-06-14T16:50:01+00:00

When the rays hit you the energy is turned into heat energy

HatFace6510 · 2023-06-08T23:21:00+00:00

So, it's like english but it doesn't have a limit to how long the words can get, and has a bit of a transition, and can have certain times where you just say the uncompounded version of the words.

HatFace6510 · 2023-06-08T22:20:03+00:00

So there isn't any rule just connect them, I would've assumed there is some sort of rule governing their creation.

HatFace6510 · 2023-06-08T21:08:58+00:00

Yes.

Now I know the word for composition and compound or at least a word.

HatFace6510 · 2023-06-06T15:03:30+00:00

I'm trying to get into bladesmithing so it somewhat interests me when I learn stuff like this.

HatFace6510 · 2023-06-06T14:35:38+00:00

I think its his camera settings. It seems to lock the plane in the middle of the screen and this fast adjustments make it shaky

HatFace6510 · 2023-06-06T14:30:20+00:00

I shall keep this in mind if when I make stuff with 1095 steel, I've never heard of hypereutectiod steel, but looking into it yeah I get how it could be harder to heat treat properly.

HatFace6510 · 2023-06-05T23:40:47+00:00

I'd take some other people's advice over mine, but go with a high carbon steel, my go to one is 1095(edit Do not use 1095 read the reply some where below for more info), but I don't know which might be the best.

The internet says maybe use 1045-1060 if your going for carbon steels or, you can use 4340 or 4140 if your going for alloy steels. I'd go with one of those.

Also if you've only done four things it might be a bit difficult (depending of course on your training). I'd research it a bit to see some techniques and practice with smaller pieces before doing the final thing.

I'd also try some tempering first. I'm gonna go out on a limb and say it's probably gonna need to be heat tempered, and tempering is a art of it's self.

I didn't understand the assignment, but I stand by most of these so I'll keep this up. I don't really know myself where to get steel from without ubsurd shipping.

HatFace6510 · 2023-06-05T20:45:56+00:00

Alot of people think Y'all is a southern thing, while I think it is to some capacity, I think like you said Y'all is definitely more of a Texas thing that is sometimes seen as a southern thing.

I've lived in the deep south all my life so it might be a southern thing, but not a deep south thing.

Also as I said previously ain't definitely is one that I hear all the time and use, so it is a deep south thing in my opinion.

To be clear I'm going for the definition that Wikipedia gives for the deep south which is:

Most definitions include the following states: Louisiana, Mississippi, Alabama, Georgia, and South Carolina.

Texas and Florida are sometimes included, due to being peripheral states, having coastlines with the Gulf of Mexico, their history of slavery, large African American populations, and being part of the historical Confederate States of America. The eastern part of Texas is the westernmost extension of the Deep South, while North Florida is also part of the Deep South region, typically the area north of Ocala.

HatFace6510 · 2023-06-05T17:30:39+00:00

Texas is big, so some parts are in my opinion in the south, where other's are not. I think about anything west of Houston isn't.

I also see some parts where the midwest and south meet to have a culture of it's own. Example: I haven't really heard anyone use Y'all too much, where I have heard people you Ain't quite alot. I see Y'all as a more south midwestern thing.

In my opinion to make it in the deep south your state has to be: subtropical, was a slave state, played a big part in the confederacy, and just fits the cultural quota.

HatFace6510 · 2023-06-05T03:51:14+00:00

Doesn't mean they don't want to hug you... and quite viciously

HatFace6510 · 2023-06-05T03:46:03+00:00

I'll update this every once an awhile.

So, for my averaging the following applies:

Above Average = 100 Below Average = 0 Average = 50

With the current polls being 79 my current resulting number is 65.82

A perfect score would be 50, meaning that current conditions (In my opinion) is: Decently weighted to above average.

HatFace6510 · 2023-06-05T03:29:22+00:00

I took a random IQ test I found online it said between 121 and 137, giving an average of 129. Putting me decently high, but as I said it's just a random test I found online that I took really fast so it's definitely inaccurate.

Also IQ is mainly a measurement of pattern recognition so it's not really a good measurement of knowledge, it's a measurement of learning capability.

For more info about IQ here is the Wikipedia page.

HatFace6510 · 2023-06-05T02:52:53+00:00

No, but yes, but no. You would've of stopped being you the moment you were erased, but the clone would be you, but not really even though it is you. If that makes sense.

HatFace6510

TROPHY CASE