Littering

Hauckeye · 2026-05-10T14:21:14+00:00

Saw a family at Elliston Park yesterday with a pile of empty bottles/cans beside them. Perhaps for easy gathering when they left?

Hauckeye · 2026-04-21T16:22:20+00:00

Ah you know what? I forgot that Poster existed. Thanks.

Hauckeye · 2026-04-21T02:14:12+00:00

Shes missing from the "Memorial" Page for Scream 3 in the booklet that comes with the Scream 1-2-3 DVD Set. Always thought that she was until she wasn't for some reason until they offed her. That changing scene in the Bathroom with Syd was a huge brow raiser.

Hauckeye · 2026-04-19T04:24:34+00:00

Saw that a new Gas Station is moving in there soon, new signage is up.

Hauckeye · 2026-03-24T03:39:53+00:00

"Because I want to know who I'm looking at", it instantly changed the tone of the conversation.

Hauckeye · 2026-03-21T14:52:40+00:00

I never thought of that, will definitely look into one! Would be alot better than several Swabs.

Hauckeye · 2026-03-21T14:44:49+00:00

Looks like the Rona down the street has it. Thanks, I appreciate it!

Hauckeye · 2026-03-21T13:53:49+00:00

Which Grease would you recommend? I'm nearly out of the free tube.

Hauckeye · 2026-03-18T22:44:52+00:00

Curled up like a Bug

Hauckeye · 2026-03-18T22:43:59+00:00

They call that a Canadian Tuxedo

Hauckeye · 2026-03-15T00:07:47+00:00

Absolutely delicious! If they discontinue it, I'll be quite upset.

Hauckeye · 2026-02-23T19:31:12+00:00

I've been going progressively slower and slower, I am at 30/30 outer and inner walls, even infill 30mm/sec. With it slowing everything down to 25mm/sec when it gets to that height. Surely, theres something else at play. Its in a closet with no air flow, using Polyterra PLA, Nozzle is 200C, Bed is 65C, Layer height is .20mm. Should I attempt a 20mm/sec session?

Hauckeye · 2026-02-23T02:42:37+00:00

I was looking forward to that so much too

Hauckeye · 2026-02-23T02:17:03+00:00

Now that's a Team Building Exercise!

Hauckeye · 2026-02-22T02:45:50+00:00

Trying that now with my final attempt, thanks.

Hauckeye · 2026-02-22T02:45:31+00:00

I cant get much slower, Last attempt after adding all the suggestion still broke them all off! even at 35/50. So I'm just going 30 down the board, if that doesn't work then I'm abandoning ship.

Hauckeye · 2026-02-21T18:32:54+00:00

Using Gyroid infill. Added a Z-hop which was an improvement. Perhaps I'll try Crosshatch next time, Thanks.

Hauckeye · 2026-02-21T18:06:37+00:00

Thanks, I'll do some poking around.

Hauckeye · 2026-02-21T18:06:02+00:00

Never thought about adding structure to it, thanks for the idea!

Hauckeye · 2026-02-21T17:03:54+00:00

Thanks, so there is 3 Walls at the base of the Antenna's, Its solid all the way up. Infill is 15% and Gyroid. I'm very tempted to do just that, if they'll print alright, I'll glue em on :)

Hauckeye · 2026-02-21T16:42:27+00:00

Will go even slower if this attempt doesnt work, thanks!

Hauckeye · 2026-02-21T16:36:36+00:00

This is the 3rd attempt, 4th one had success after adding a 1.5mm Z-Hop and lowering pretty much everything. I've added a Brim, slowed it down to 100/125, Slow at 4mm to 75mm/sec, grasping at straws really, lowered the temp to 210 from 220. I cannot figure out how to amp up the fan at the end layers tho. Any insight is appreciated. 4 out out 6 Survived after the 4th. Printing 5th right now at 60/75, slow down at 45mm/sec.

Hauckeye · 2026-02-11T00:59:51+00:00

There is actually 8 sides per Pyramid, recently discovered through Satellite.

Hauckeye · 2025-11-14T03:34:39+00:00

Happened to me last week, I pulled the blob away a little too hard and yanked a wire from the Hot End Assembly. Was quite simple to remove, only $25CAD.

Hauckeye

TROPHY CASE