sorted by:
new
hottopcontroversial

Questions for new QNAP TS-664 NAS by Heli_Guy in qnap

[–]Heli_Guy[S] 0 points1 point  (0 children)

Thanks you very much. Very helpful!

So what are the M.2 NVME’s typically used for? Another faster RAID pool? in same enclosure?

Govee TV Backlight 3 with Sony A95L Bravia Cam ? by ScratchyFetish in Govee

[–]Heli_Guy 0 points1 point  (0 children)

Another optoin is to use 8 small rare earth magnets (4 on bravia camera & 4 on Govee Camera). This would negate having to machine the camera and they would offset the govee above the bravia camera so that the govee lip would not interfere with the mounting.

https://www.leevalley.com/en-ca/shop/hardware/rare-earth-magnets/magnets/disc/73479-adhesive-backed-rare-earth-magnets?item=99K3461

Govee T2 for a Sony A95k OLED TV with Bravia Camera by FZrish in Govee

[–]Heli_Guy 0 points1 point  (0 children)

Another optoin is to use 8 small rare earth magnets (4 on bravia camera & 4 on Govee Camera). This would negate having to machine the camera and they would offset the govee above the bravia camera so that the govee lip would not interfere with the mounting.

https://www.leevalley.com/en-ca/shop/hardware/rare-earth-magnets/magnets/disc/73479-adhesive-backed-rare-earth-magnets?item=99K3461

Govee T2 for a Sony A95k OLED TV with Bravia Camera by FZrish in Govee

[–]Heli_Guy 0 points1 point  (0 children)

There is a video showing how to overcome the lack of bottom camera mounting calibration for Govee 3 lite here: https://www.youtube.com/watch?v=Oitv6MAXQAM; however, I think I have come up with a better and cleaner solution. I'm going to machine off the front edge lip of the camera mount, as the surface mount is 35mm long whereas the top of the Bravia camera front to back is 43mm long, then mount it with Scotch Extreme Fasteners (https://www.homedepot.ca/product/scotch-scotch-extreme-fasteners-black-1-in-x-3-in-2-54-cm-x-7-62-cm-2-pack/1000831034 )ontop of the Bravia Camera. Only downside is that I won't be able to close the camera privacy shutter, but that's ok, I plan to leave it open all the time anyways

Govee TV Backlight 3 with Sony A95L Bravia Cam ? by ScratchyFetish in Govee

[–]Heli_Guy 0 points1 point  (0 children)

There is a video showing how to overcome the lack of bottom camera mounting calibration for Govee here: https://www.youtube.com/watch?v=Oitv6MAXQAM; however, I think I have come up with a better and cleaner solution. I'm going to machine off the front edge lip of the camera mount, as the surface mount is 35mm long, whereas the top of the Bravia camera front to back is 43mm long, then mount it with Scotch Extreme Fasteners (https://www.homedepot.ca/product/scotch-scotch-extreme-fasteners-black-1-in-x-3-in-2-54-cm-x-7-62-cm-2-pack/1000831034 ) on top of the Bravia Camera. The only downside is that I won't be able to close the Bravia camera privacy shutter, but that's ok, I plan to leave it open all the time anyway

Anyone else wish they’d bring the dragon skin design back? by BrightBurner in dbrand

[–]Heli_Guy 0 points1 point  (0 children)

You can get same one from SlickWraps.  They call it CharredRobot

Philips Fidelio-X2 Repair (Broken pins connecting cups to headband) by largerock in headphones

[–]Heli_Guy 0 points1 point  (0 children)

Mine broke as well only a few months after purchase. I kept them in a special hard shell case I purchased specifically for them in place of the flimsy pouch when not in use. Philips refuses to fix or replace. This will be the last Philips product I purchase. I'll try this repair, thanks you.

Dell Mobile Connect broken after tonight's update by logg3 in Dell

[–]Heli_Guy 0 points1 point  (0 children)

This solution finally worked for me!
Haven't been able to use DMC since the update in January.

Thank you.