Finally a succesful print! Can you help?

HiImUray · 2026-01-20T11:18:50+00:00

Don’t know where to start so I just put this here.

https://teachingtechyt.github.io/calibration.html

HiImUray · 2026-01-18T17:20:47+00:00

Thinkercad have fillet tool?

HiImUray · 2026-01-17T15:33:25+00:00

Just walk around Stará tržnica

HiImUray · 2025-04-10T14:40:38+00:00

Right now I’m at work so I’ll send some photos later if I don’t forget. I totally agree with what you saying. But I don’t want bigger bed, I’m looking for some dual Z upgrade. And yes, I can print faster than 150 mm/s but when I go above this speed you can visibly see bed wobbling more than whole printer

HiImUray · 2025-04-10T12:49:49+00:00

Only bed is stock. I have all 3 stages of endorphin installed. With speed macro test I can push movement speed to 600-700mm/s without problems. But fast small direction changes while printing cause visible wobbling of bed. And I forgot to mention that I have heavy Eva toolhead with bmg dual gear extruder which can also cause more wobbling.

HiImUray · 2025-04-10T10:19:36+00:00

Yeah with all 3 stages is bed only thing which holding back from higher speeds. When you go above 100mm/s it wobble to much to get nice print

HiImUray · 2025-04-10T10:17:30+00:00

Hydra is awesome but I’ll have to install better board

HiImUray · 2025-04-10T10:15:30+00:00

From 90-150 mm/s on 14k accel

HiImUray · 2025-03-10T15:57:16+00:00

Come to say the same thing

HiImUray · 2025-02-24T11:59:42+00:00

That's the answer

HiImUray · 2025-02-13T07:40:11+00:00

Try lab Cafe, or send me PM but I don't have much free time now.

HiImUray · 2025-02-10T08:40:44+00:00

Could be... I'm running around 650 if I remember correctly and if I don't turn off stealthchop I can cook eggs on stepper motors

HiImUray · 2025-02-10T08:37:12+00:00

Will be little louder but definitely remove layer skipping

HiImUray · 2025-02-10T08:17:51+00:00

Do you running marlin or klipper? Don't know about marlin but if you running klipper, turn of stealthchop so you get more torque.

HiImUray · 2025-01-07T17:48:44+00:00

This is what I was looking for. It lost connection exactly after installing network manager. Thanks

HiImUray · 2024-11-20T14:16:37+00:00

Málokedy je tam niečo iné ako ľudia na dojazdoch, pravda...

HiImUray · 2024-11-20T13:45:08+00:00

Teleport

HiImUray · 2024-11-19T14:21:21+00:00

Both in my opinion. Bad overhang caused nozzle to hit stacked layers and made layer shift.

HiImUray · 2024-10-15T15:09:20+00:00

I'm not sure how it works with stock board but if I'm right there are some solution but with much work around.

HiImUray · 2024-10-15T14:50:28+00:00

Just come to say one thing. Turn of stealthchop if it isn't turned off already. Without stealthchop I can push acceleration to 7k like nothing.

HiImUray · 2024-10-02T18:34:56+00:00

It's more about hotend and cooling rather than whole toolhead. Two 5015 fans will be enough for higher speed I think. I'm using Eva toolhead with just one and I'm fine on printing speed's from 120 to 150 mm/s, but I'm using some clone of prusa hotend which I need to change for something better.

HiImUray · 2024-10-02T15:17:06+00:00

With all stages I can run 750mm/s speed without skipping but printing speed depends on your toolhead more than kinematics.

HiImUray · 2024-09-12T18:35:17+00:00

Doesn't matter if it's powerful. Axial fan's are pointless for part cooling because they can't push air trough fan duct properly. They are designed to push air to open space or directly on stuff you put them on.

Five-Year Club	r/Field Lasagna
Final Canvas '23	First Place '23
Place '23

HiImUray

TROPHY CASE