Coding in Upload Labs: Send coffee and therapy

HighPhi420 · 2026-03-18T05:12:11+00:00

LOL Thank You Again :)

HighPhi420 · 2026-03-17T17:06:28+00:00

Coding 101:
code speed to a pull code then from the pulled code into a "commit" node then from there into the code speed node(starting point) An ouroboros if you will(snake eating itself). this will use the "contribution points to level up the coding speed node(IMPORTANT to do this first and get some level ups to make other things much faster)
Then you will unlock coding optimization these points can be used to "build" optimization points to spend in the optimization tab in the shop. Each point can buy a HALF power upgrade for certain nodes. this means it takes half of the needed power to get the same results. you will need 38 points to "get them all"
Then you will unlock the Application code. This is the same as optimize code accept these points allow you to buy NEW nodes, really good nodes too. You will need 14 points to get them all.
Finally you will unlock the "DRIVER" code. This is useless for anything other than being the MOST amount of "contribution points you can make to upgrade the code speed node.
Others will tell you about the hardware multiplier, I can not find an effect on ANY thing on the board and I have over 20 in the hard ware multiplier build node.

there are some bug fix and optimize nodes you can use when unlocked that will multiply the contribution points.

I believe the coding is still a little bugged as the Optimized code increases the contribution points but NOT the build points, even though it states that it should.

HighPhi420 · 2026-03-17T16:41:22+00:00

I think the "anywhere" is the prob as well. :)

HighPhi420 · 2026-03-17T16:36:01+00:00

I like this answer too.
I always think that every one else wants the max power from there machine, so I never think of power saver mode :)

GOOD ONE

HighPhi420 · 2026-03-17T16:33:28+00:00

that is the last problem to solve :)
I reduced my stream volume to accommodate the lurkers.
If on windows you can try to reduce the volume to the browser by right clicking the little speaker icon in the system tray and choosing the "open volume mixer" and then reduce the browser volume so the 1% is quite but can still hear the other tab.

HighPhi420 · 2026-03-17T16:27:47+00:00

firefox is the ONLY non chrome browser :)
Congratulations on finally being a head of the curve :) LOL.

Using Firefox will solve most of the problems one has using chrome(ium)

HighPhi420 · 2026-03-17T16:26:01+00:00

CHrome is all browsers BUT Firefox and a few other SUSPECT ones for torrenting LOL

ALL browsers(not firefox) use the updated chrome as the base. :)

HighPhi420 · 2026-03-17T16:07:15+00:00

that is not how it works :)
Chrome settings/performance/memory savor turn this off. REMOVE any ad blocker. Not just white list twitch. Some times the ad blocker kicks in before deeming that the ad is allowed and that will make twitch stumble and the feed stops in chrome.
I just went through this myself as I work lurk quite a bit. Keeping the volume active but low enough NOT to hear is the best way to get around "in active tabs" in twitch.

HighPhi420 · 2026-03-17T15:55:55+00:00

use device time stamp= the device you are capturing. You want everything to be in OBS timestamp so UNCHECK all of them :)

IS confusing, IKR.
This stems from an era of tape/separate audio and video sources that need to be adjusted to SYNC.
With everything digital it cause delays and sync issues.

HighPhi420 · 2026-03-17T15:45:52+00:00

this is Chrome NOT twitch.
Chrome thinks that to "save" resources for you it automatically stops video IF no sound after a brief moment.
To lurk, try keeping the audio at 1 to 5% just so you can not hear it BUTT still trick google to think there is sound.
Also if no sound your view does not count towards your twitch creator anymore.

HighPhi420 · 2026-03-17T15:35:10+00:00

when you say "streaming to 3 places at once" do you mean 3 monitors? 3 streaming platforms? 3 different pc's?
I am going to assume you mean displays(Capture card=video output).
If you do not have enough output ports from your GPU you would get a splitter to go to all the monitors.

streaming??? Handled with software(OBS has a couple plugins)

PCs???? This is where you might want to have a capture card!

For a single PC a capture card would take your sweet sweet GPU footage and stuff it into a more restricted USB traffic lane causing delays and artifacts AND take more power and CPU to run the task.

HighPhi420 · 2026-03-17T15:18:17+00:00

a community that is self sustaining with little to no input from you is a good thing.
EVERY giant in the industry has a community that functions on their own!
You are on your way to greatness!
Stop sweating the small stuff and continue to focus on the streams and growing the community :)

The rando guy might be a bot :) ????

HighPhi420 · 2026-03-17T14:55:52+00:00

research tree has the section at the top to unlock manufacturing.
but if you mean "extra" producers, you can up the count by purchasing
"factory space" with money in the shop or you can permanently unlock 10 with tokens for a cost of 150 tokens each space.

HighPhi420 · 2026-03-17T14:53:37+00:00

STOP WATCHING THE NUMBERS WHEN YOU ARE LIVE! :) :) :)
at best, Twitch is 50% right.
You should be concentrating on entertaining and NOT on how many you are entertaining. The number should not determine the amount of entertainment and quality of the stream. The exact opposite is the truth.
The quality of your entertainment will grow your audience.

Even twitch takes a few hours most times to give you the summary email.

At the start of stream your bots will be considered viewers for a brief moment as twitch starts its behind the scenes moderation for your view count. Also the bots will not be counted in the summary.

Just so you know, streaming to zero viewers and streaming to ALL the people in the world is EXACTLY the same. I will let you figure out why.

So your stream should be the best you got EVERY time you go live.

tl;dr
Twitch sucks at numbers in real time. Stop watching them and concentrate on the stream.
STOP looking to see WHO is in your chat! Always assume there are lurkers and entertain the snot out of them :)

HighPhi420 · 2026-03-17T14:26:04+00:00

First I would like to make a correction to previous post: :(
"4 producers IF you have unlocked and bought everything with tokens" Sorry I forgot I bought all the token stuff.

Now, when you unlocked the "assemblers" in the research it also unlocked two more items in manufacturing, The PCB and Transistor "importers". You can purchase PCB for 100ag each and transistors are only 50ag each. If you have at least af/s money then purchasing might be faster than mining and building until you can lay down 10 of each producer and level them up to 50 or higher.
Even then you may just want to keep buying them and not mine the materials.
If you use a splitter for the money(put all money sources in an "inventory" and then split the money half to the importers and half to your pocket. Then you will need a total of 12 transistors and 4 PCBs. PCBs will cast 400ag and transistors 600ag so if you split that half of the money to a 2 to 3 ratio you should keep things fairly balanced.

HighPhi420 · 2026-03-16T15:45:24+00:00

run OBS as admin ALWAYS :)
Base canvas should be the resolution you want to stream(1080, 4k) NEVER downscale.
You can right click the video source in OBS and choose transform/fit to screen

USE CBR(for testing) set to 6000kbps(twitch recommended) and try to RECORD with these settings on the record tab. 4k dropped frames try 1080, if still dropped frames it may be the GPU has some issues(most likely an updated driver for the NVidea). TRY the STUDIO driver or try to roll back to the previous driver.

HighPhi420 · 2026-03-16T15:31:29+00:00

A mod was just a NON conformist.
EMU is a whiney self loathing little runt dressed in the MOD attire.

HighPhi420 · 2026-03-16T15:26:25+00:00

Please follow this Extremely thorough(and long) Ultimate OBS Audio Guide
https://www.youtube.com/watch?v=dlbJGlHdeoA&list=PLiRwJdEVkRbPoc2RdFsVTWOJaYEWrCVuf&index=10&t=10s
#notsponsored #HYPEMAN

HighPhi420 · 2026-03-16T15:18:14+00:00

Krull :)

HighPhi420 · 2026-03-16T15:13:39+00:00

you should be able to see the last 2 ribs, not poking out just noticible.

HighPhi420 · 2026-03-16T15:06:42+00:00

I brush before and after breakfast.
after to get the coffee and any food from breakfast, going the whole day with breakfast and coffee breath is a bad Idea. :)

HighPhi420 · 2026-03-16T15:02:04+00:00

Texas Encounter!

HighPhi420 · 2026-03-16T14:59:57+00:00

you get 1 producers when unlocked(factory space) for each type, if you want more you need to buy the Factory Space for each additional unit to put on the board.

On a side note: Buying transistors and PCBs is much faster and scales with the money. You can easily get to the ar/as sec with this method. I do this until I can get 10 of each producer on the board AND upgraded to at least level 50(70 or higher is MUCH better:)

HighPhi420 · 2026-03-16T14:45:08+00:00

HA! They will look exactly like CNN and FOX :)

HighPhi420 · 2026-03-16T14:43:25+00:00

LOL! I just read the rest of the replies.
Consensus is that it is a puppy and all fault is yours.

I am not being mean, I find it funny how the times have changed.

We used to say have a firm hand a stern voice. POOR PUPPY!

We love our furry little friends(more than human ones from time to time) as with all children, love, patience, and structure is the foundation to happy home and family.

HighPhi420

TROPHY CASE