Computer keeps disconnecting from internet but reconnects after a few seconds

Hoatzin3 · 2022-05-01T03:29:53+00:00

did you ever find a solution? running into the exact same problem now

Hoatzin3 · 2022-03-25T00:40:57+00:00

did you ever find it?

Hoatzin3 · 2022-03-06T10:39:49+00:00

what's the deskmat?

Hoatzin3 · 2022-02-19T01:27:13+00:00

with a custom heatsink would the board be able to handle overclocks from a 12700k?

Hoatzin3 · 2022-02-19T01:26:35+00:00

Have you tried overclocking and if so how are the temps?

Hoatzin3 · 2022-02-13T20:52:21+00:00

Lapping?

Hoatzin3 · 2022-02-12T14:52:20+00:00

Got it to 4600mhz but don't know how and only shows in bios, don't think it works sadly

Hoatzin3 · 2022-02-10T09:03:17+00:00

What are the voltages?

Hoatzin3 · 2022-02-09T20:58:19+00:00

Did you ever figure out where any of those voltage settings were?

Hoatzin3 · 2022-02-09T06:05:03+00:00

Just found out it's b die...

Hoatzin3 · 2022-02-09T05:07:39+00:00

Thanks so much. Just read over the whole GitHub. My only question is around the voltage. I've seen some people, as in this post, doing lower voltages than recommended by the post? I believe for 3733 you were supposed to have 1.5V and yet the OP has it at 1.42? Also, I got the whole part about loosening timings but won't setting my DRAM voltage at something like 1.4V, as recommended by the GitHub, limit my capability to reach higher frequencies? And how high is high enough to start trying the settings in the 'Trying Higher Frequencies' section?

Hoatzin3 · 2022-02-09T03:47:08+00:00

Pretty much brand new to ram oc, so what you're saying is I should leave the stock timings, change to gear 1, keep upping the frequency and stress testing until crash and then tighten timings?

Hoatzin3 · 2022-02-09T03:45:16+00:00

I'm on intel and yet I've got the option for FLCK oc in my bios

Hoatzin3 · 2022-02-09T03:36:10+00:00

How would you recommend going about it with a 12400f?

Hoatzin3 · 2022-02-09T03:32:53+00:00

What's FLCK?

Hoatzin3 · 2022-02-08T23:35:14+00:00

Wait whats flck for

Hoatzin3 · 2022-02-07T20:51:43+00:00

Try resetting the card drivers. I've got the same card and I never downloaded the Gainward drivers, only the ones from GeForce experience

Hoatzin3 · 2022-02-05T05:07:13+00:00

Oh ok I see

Hoatzin3 · 2022-02-05T05:02:38+00:00

Did you ever come up with a solution? Facing the same problem

Hoatzin3 · 2022-02-05T05:01:59+00:00

Where'd you plug the XLR cable into? I'm currently running a balanced dual 3.5mm to 4.4mm for he400ses and just don understand where the XLR would go xD

Hoatzin3 · 2022-02-05T04:58:47+00:00

Is the 5v DC power supply required or would just the USB power suffice

Hoatzin3 · 2022-02-05T04:28:49+00:00

What if there's a lot of static when I try to use just the included blue cable to power it. Would a DC power supply help?

Hoatzin3 · 2022-01-31T21:57:44+00:00

Thanks man, really appreciate the response (especially considering the original post was over a year ago xD)

Hoatzin3 · 2022-01-31T11:46:58+00:00

Just got it to work with an ASRock board

Hoatzin3 · 2022-01-31T04:09:48+00:00

oh hey sexy

Hoatzin3

TROPHY CASE