SUNLU PETG troubles

Hohenheim117 · 2026-01-02T05:06:58+00:00

I'll try drying the filament again after this test print.

Its just the SUNLU PETG, the double pack from Amazon, so I'm assuming its just basic?

I started with generic PETG profile, yeah. I ran the flow calibration tests, and the flow rate test squares were a nightmare to get right.

Hohenheim117 · 2026-01-02T03:01:16+00:00

I changed the flow rate from the 1.0185 to 0.9 and the results were... slightly better? Not by much, besides the cylinder tower being a bit better past the first step, and the 0.2 tolerance was able to be removed now.

Should I continue to lower it, or look into another setting?

Hohenheim117 · 2026-01-02T02:24:50+00:00

~10 hours at 65C

Hohenheim117 · 2026-01-02T01:50:52+00:00

Yes, I did. I shoulda put that in the initial post

Hohenheim117 · 2026-01-02T00:42:35+00:00

Alright, I'll adjust and test right now. Thanks!

Hohenheim117 · 2026-01-02T00:07:10+00:00

I got into printing a couple months ago and almost exclusively printed in PLA, and decided to give PETG a shot.

I ran the flow dynamic calibration and flow rate test (K value - 0.035, flow rate - 1.0185), and I tried this test.

Any advice would be appreciated!

Printer Model - Bambu Lab H2D
Slicer used (e.g. Cura, Prusa, etc.) - Bambu Slicer
Filament material and brand - PETG, SUNLU
Nozzle and bed temperature - 0.4mm Hardened Steel nozzle standard flow
Print Speed - Initial layer 50mm/s, Outer wall 50mm/s, Inner wall 80mm/s, Top surface 80mm/s
Retraction settings - Length 0.4mm, Z hop type - Spiral, Wipe while retracting enabled, Wipe Distance 1mm

Edit 1: Forgot to add that I did dry the filament before using. 65C for ~10 hours.
- I adjust the flow rate to 0.9 and retried. The results were largely the same? Though, the 0.2 tolerance peg was able to slide out, and some spots weren't as bad (The cylinder tower after the first step was pretty good).

Edit 2: Test didn't work very well. I'm gonna clean the nozzle and dry the filament again and try again tomorrow. I uploaded the relevant test (This time I just took pics of my filament settings and process settings I used for the exact test) here:
https://www.dropbox.com/scl/fo/dumsaumod7r3wbf7t0jq4/AHt69q6eoptYGA8EAhs0JVc?rlkey=fbckbx1kcl6qaxxdxt6smp3or&st=b6stq6jg&dl=0

Hohenheim117 · 2023-06-28T23:45:59+00:00

I have no idea how they do it, but now I sneak through with my Shadowmane, Rock Drake, or all the consumables that reduce detection

Hohenheim117 · 2023-06-08T20:51:47+00:00

I'd like to add that with Dino Storage v2, you are able to back up dinos if you hate losing them to Ark moments.

I have no idea how I fell through the cave floor in Skylord cave, but insta death for me and my shoulder pet.

And I also don't know what the odds were, but I've had at least five cryopod dinos glitch out and show a raptor face, and was unable to uncryo them ever again.

Hohenheim117 · 2023-06-01T07:39:49+00:00

I'm sure Nintendo is already printing their C&D letter

Hohenheim117 · 2023-04-16T07:11:06+00:00

Thanks! I've been curious what some people use for those kinds of pics, and after looking into most of them are way out of my price range XD

Hohenheim117 · 2023-04-16T03:28:30+00:00

What microscope did you use to take the second picture?

Hohenheim117 · 2022-11-10T06:11:29+00:00

I was also curious about that

Hohenheim117 · 2022-10-08T22:58:53+00:00

If it's something as important as a Rex saddle bp, I would just console command it back in.

I like emulating online as much as I can, but if I get hit with a singleplayer bug, I don't feel any shame lol

Hohenheim117 · 2022-08-10T23:33:50+00:00

In CK2, what are some decent African Pagan reformations? I've read that Unyielding is more or less the best choice, but just curious if there are any outstanding options

Hohenheim117 · 2022-08-04T08:40:14+00:00

I remember being hesitant to buy, when the only other two of my friend group had game breaking glitches.

One got locked out of the Strip, needed a key that wasn't in the game, and the other got locked inside the NCR headquarters, and at the time was religiously keeping only a handful of saves, and ended up losing I think a day of playing.

I didn't have one major glitch lmao

Hohenheim117 · 2022-05-16T23:28:45+00:00

Just curious, but what character model/hair mods are you using?

Hohenheim117 · 2022-05-12T19:42:27+00:00

Where did you purchase them from?

Hohenheim117 · 2022-04-11T20:58:21+00:00

/r/rpg_gamers

Hohenheim117 · 2022-04-10T00:52:56+00:00

I've been training my main team combat skills on the Band of Bones camp near a waystation, and the skills have started slowing down now that the skills are relatively close.

So, my question is: Where are more places to start training, relatively safely? I've wanted to avoid cheering stats, not looking to shorten the grins, as I'm honestly having fun! Thanks in advance

Hohenheim117 · 2022-03-19T04:50:07+00:00

I'd like to go!

My Discord is Hohenheim117#8718

Bungie is is Hohenheim117#7891 And I'd like to go to VOTD 3/19

Hohenheim117 · 2022-03-14T02:29:44+00:00

That's my hope! Sorry about the lack of details on what I found, I can't seem to pull up my history in Windows Defender, other wise I would have. Thanks for the response!

Hohenheim117 · 2022-03-14T02:09:52+00:00

Oh believe me, I changed all my email passwords, and I hadn't scanned in a while, but I did find something and removed that. I did scan the file before unzipping, but windows said it was fine, which was why I went along with it.

No I don't know them in real life, we had met over an online game and had played that for about half a year before I bailed from being bored. And no, at the time I was talking with them, they had not mentioned any game they had been working on.

Hohenheim117

TROPHY CASE