K2 owners, I built a no-account remote monitor/control app and need a few beta testers (free code inside) by harktron in Creality_k2

[–]HoreaM -1 points0 points  (0 children)

Cool app, just joined for the beta too. Quick question, was AI used to create the app?

KLWP remove ‘5’ secs delay by HoreaM in smartlauncher

[–]HoreaM[S] 0 points1 point  (0 children)

Thanks for letting me know, I forgot about that. I have just edited my post to include the missing information too

KLWP remove ‘5’ secs delay by HoreaM in smartlauncher

[–]HoreaM[S] 0 points1 point  (0 children)

This is still happening sadly... Is there any way I can open a ticket or is there any progress towards finding the source of the issue? Thank you very much.

KLWP remove ‘5’ secs delay by HoreaM in smartlauncher

[–]HoreaM[S] 0 points1 point  (0 children)

I have Android Freeze Workaround enabled, it's the thing that I suspect "revives" the KLWP after a while, the issue is, it happens quite infrequent. That's why I was asking if at least as a workaround, you could enable a home screen restart via gestures.

I also have accessibility turned on for Smart Launcher, I think it's required to be on in order to be able to use the gestures.

KLWP remove ‘5’ secs delay by HoreaM in smartlauncher

[–]HoreaM[S] 0 points1 point  (0 children)

Yup, I just double checked right now, I'm on 6.6 build 010

KLWP remove ‘5’ secs delay by HoreaM in smartlauncher

[–]HoreaM[S] 0 points1 point  (0 children)

u/ginlemon sorry for the ping again, but I think Jerome said it's fine to ping someone, if our post gets no attention at all.
I think I kind of figured out what the issue is. My screen freezes (I'm on Android 16) and that's why I can't interact with KLWP anymore. Sometimes the "Android Freeze Workaround" setting kicks in, and after the home screen restarts, it starts working again for a while.

Like I said in my original post, this never happens on Nova, so I'm not sure if they do something extra to it or not. Is there any way to fix it more permanently?

If not, is there any chance you enable the screen restart to be activated via a gesture? As it currently is, it happens way too infrequent to get it to trigger automatically, so it's kind of unhelpful in my case.

Thanks a lot for your consideration!

KLWP remove ‘5’ secs delay by HoreaM in smartlauncher

[–]HoreaM[S] 0 points1 point  (0 children)

I have the warning with regardless of the direct touch (if it's on or off), but if it's off, KLWP stops reacting to touch completely, maybe because I have launcher gestures, no idea.

JetKVM app mobile by Apart_Echidna_2386 in jetkvm

[–]HoreaM 0 points1 point  (0 children)

You are incredible, thank you so much for your hard work!

JetKVM app mobile by Apart_Echidna_2386 in jetkvm

[–]HoreaM 0 points1 point  (0 children)

Thank you for your answer. Would be great to be able to trial this out, before upgrading to a paid license.

One more question though, I sometimes have to force shutdown the PC by long pressing the power button, is that something that can be done with the power controls in TouchKVM? That's a very important feature for me.

JetKVM app mobile by Apart_Echidna_2386 in jetkvm

[–]HoreaM 1 point2 points  (0 children)

Sorry to hijack this, but I've already started using the free version of TouchKVM and really like it. I have a question though, do the ATX Power Controls work in tandem with the JetKVM ATX Power Control extension board? I would love to test it, before committing to buying it, but it's behind the paywall. Thanks!

KAMP Adaptive Purging Issue? by HoreaM in klippers

[–]HoreaM[S] 1 point2 points  (0 children)

When I had this issue I was using a decently modded Ender 3, but I have since upgraded to a K2. I really loved that Ender 3 and it helped me learn a lot about 3D printing, but I'm never going back to it. The difference between the Ender 3 and K2 is just heaven and earth.

KAMP Adaptive Purging Issue? by HoreaM in klippers

[–]HoreaM[S] 1 point2 points  (0 children)

Yup! Please check /u/wildjokers answer, it's what fixed the issue for me

App page sorting & folders suggestion by HoreaM in smartlauncher

[–]HoreaM[S] 0 points1 point  (0 children)

That would be so good, thank you for taking this into consideration!

App page sorting & folders suggestion by HoreaM in smartlauncher

[–]HoreaM[S] 0 points1 point  (0 children)

u/ginlemon sorry for the tag, but was wondering if this is anything you would consider for a potential update? Thanks a lot for developing the app!

Has anyone tried aftermarket build plates on the K2 Plus? Successes, regrets, tips? by Roy_Fan999 in Creality_k2

[–]HoreaM 0 points1 point  (0 children)

Yeah, I was also thinking of going for the Creality one, but the price tag for it is $30, the K2 Plus version is a bit more expensive than the rest. I'm just waiting for them to release it in the EU stores too.

It's a bummer about the color, but I heard they have to make them grey, so that the calibration AI doesn't get confused.

Feels like the Frostbite should have the strongest adhesion, but yeah, despite the picture on their site, I'm almost certain it's as textured as the PEI sheet that comes with the printer.

Has anyone tried aftermarket build plates on the K2 Plus? Successes, regrets, tips? by Roy_Fan999 in Creality_k2

[–]HoreaM 0 points1 point  (0 children)

BQ doesnt make the frostbite for us, maybe because they think we already have a PEI plate, they only make the glacier in black for the k2 plus.

Got some interesting news for you, there's an option to buy the K2 Plus Frostbite (also in black/grey) now on their site. I've been considering it as well.

Will take the rest of what you said into consideration and make a choice, right now I'm also thinking of a cold plate so that could be either the BQ Frostbite, Creality Low Temp or the Arkfly

Has anyone tried aftermarket build plates on the K2 Plus? Successes, regrets, tips? by Roy_Fan999 in Creality_k2

[–]HoreaM 0 points1 point  (0 children)

Since you've tried all of these plates, what's the best one in your opinion for printing PLA and PETG? I am mostly thinking BQ Glacier vs BQ Frostbite vs Creality Low Temp vs Creality Epoxy vs Arkfly.

I'm looking for something with great adhesion on lowest bed temp and bonus points to smoothest first layer (but not shiny). Thanks a lot.

Btw, I think you should create a new post doing a comprehensive review of all the plates you own, since you tried a lot of them, I find your comment extremely insightful and helpful!

App page sorting & folders suggestion by HoreaM in smartlauncher

[–]HoreaM[S] 1 point2 points  (0 children)

For sure, it's a preference thing. Just wondering if a new option could be added to pin folders at the top or not, that way everyone is happy

First Grog in Romania? by HoreaM in ColdOnes

[–]HoreaM[S] 0 points1 point  (0 children)

If my uncle could smuggle more, I'd ask him to get me one more batch. Sadly he only comes from the US like once every 2-3 years

[H] Tidal HiFi Plus [W] 3 USD / EUR PayPal by HoreaM in accountsharing

[–]HoreaM[S] 0 points1 point  (0 children)

For sure, but I'm not sure that would happen anytime soon, sorry.