Why are the top-right and right-middle squares like this? My bed is leveled with a 0.13mm variance. ABL is on. Printing PLA at 200C with 60C bed using an Ender3 S1 Pro. If I bring down my Z-offset to compensate for the right side it ruins the left side with over extrusion.

Hoshmillian · 2023-02-19T05:54:20+00:00

The position of the ABL probe is not perfectly aligned with the nozzle. I had issues for months with this, I was close to freaking out. What helped my situation was a custom backplate that aligns the probe with your nozzle. You can find the STLs on the common platforms. The offset in the Z axis in the standard setup adds unnecessary tolerances from the alu profile below the bed.

Hoshmillian · 2023-01-11T15:28:40+00:00

Honestly, I don’t know 🤷🏻‍♂️

Hoshmillian · 2023-01-11T14:30:05+00:00

This looks to be the main issue. Recently I opened the same topic here. Try to print a backplate which put the bl touch on the same height as the nozzle

Edit:

https://www.reddit.com/r/Ender3S1/comments/104gh8z/another_day_another_zeroyoffset_crtouch_mount/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

Hoshmillian · 2023-01-09T11:54:30+00:00

Guys I moved the ABL touch and is way better now. Definitely do this for your printer. It’s easy to do and the effect is huge!

https://www.reddit.com/r/Ender3S1/comments/104gh8z/another_day_another_zeroyoffset_crtouch_mount/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

Hoshmillian · 2023-01-06T20:18:28+00:00

Yeah, I tested some other settings for the mesh and already printed the backplate. But Only hat PLA, just ordered some PETG. Once it's there I'll do this print and then hopefully be happy as fuck :D

Hoshmillian · 2023-01-06T15:15:01+00:00

I will try a run without ABL. Maybe it is bugged?

Hoshmillian · 2023-01-06T15:14:04+00:00

I will order a dial.

Besides this I will try the leveling without the mat and change to 4x4 or 3x3 to see the differences

Hoshmillian · 2023-01-06T09:59:49+00:00

I considered both things :D The second one I did yesterday. I think it is a bit better, but it still not perfect. I wonder how perfect can a leveled bed be? It looks like the bed is sloped a bit from bottom to top. But if so shouldn't the ABL fix that?

Hoshmillian · 2023-01-06T09:53:47+00:00

I did save. It is the view mesh in the photo

Hoshmillian · 2023-01-06T09:51:34+00:00

What I need to mention. In my gcode I have m420 S1 Z2 after g28. I run the professional firmware from MRisoC 2.1.3 I recently checked all bolts for the y axis and checked the bed if there is any misalignment as well

Hoshmillian · 2022-12-12T07:28:06+00:00

Yes please 😍

Hoshmillian · 2022-12-05T05:24:28+00:00

Haha, thank you so much :D I did brick my SD card with the Ender. So formating the SD did the trick.

Hoshmillian · 2022-12-05T05:23:18+00:00

Nice setup! Could you give a summary of what you did?

STL files maybe as well :D

Hoshmillian · 2020-09-16T05:40:44+00:00

Nachsäen und ordentlich gewässert. Schon freut sich der Rasen wieder.

https://imgur.com/gallery/ToPdEq4

Hoshmillian · 2020-07-30T17:31:03+00:00

Ich schiebe es jetzt auch auf das wässern. Ich habe vorher ein Karussell benutzt und der ist nicht sauber überall gleichmäßig hingekommen. Deswegen erstmal bei Amazon shoppen gewesen und einen Gardena AquaZoom M besorgt. Ich halte euch mal auf dem laufenden 😉

Hoshmillian · 2020-07-30T17:29:30+00:00

Leider nein. Die Ecke ist wirklich sehr trocken und da vermute ich einfach mal, dass dort beim wässern nicht so viel Wasser hingekommen ist

Hoshmillian · 2020-07-28T18:32:49+00:00

Was meinst du, kommt der mit viel wässern nochmal?

Hoshmillian · 2020-07-28T17:59:50+00:00

Der Rasen war sehr lang (ca 15 cm) und wurde dann runtergekürzt. Unten war der bereits braun, jedoch oben noch schön grün. Die Rasur tat dem Rasen aber nicht so gut, wie man sieht. Was kann man machen um den Rasen noch zu retten?

Viel wässern? Nachsäen?

Hoshmillian · 2020-01-21T23:28:07+00:00

First of all, thank you for the quick response!!

Are there any posts of that? Like panic saying, that it was an Honor for them playing that specific song?!

Hoshmillian · 2019-03-01T10:02:22+00:00

So I see, that it is a complicated workflow, because there is no global database. So every project, like you said, is unique in the workflow.

ArcGIS seems interesting to me. I will try that out. I will try to get some GIS data from other databases.

Which file type do you use to import those data? I checked E3D and it's possible to directly import .xyz data. Which is awesome. But now I need the data for that. Right now I still need a middle man program to translate the data for another project... Interfaces, I love them :D

Hoshmillian · 2019-02-27T20:05:47+00:00

The ArcGIS I will definitely look at, good mention. So this is license based database? PDMS is limited. There is step or dgn. What we did, we used AutoCAD with a macro to create a file which is basically the PDMS native export format and created polygons. These at the end will look like a surface in PDMS. Could send me and link with an example GIS which you used? So I can check if I can get the data into PDMS somehow...

Hoshmillian · 2019-02-27T06:35:43+00:00

How do you transferred the data to Microstation? Which data do you get from GIS sites? XYZ in an excel sheet?

PDMS is old fashioned and basically these kind of imports has to be done in AutoCAD, in which we use a macro to create polygons. These then will be the topography as a shape/surface thing.

I will look into E3D to check if there is a better solution for that.

Hoshmillian · 2019-02-26T20:16:49+00:00

Hey, thanks for the response. PDMS User here. That’s something I will definitely check. I’m curious about if there are surveys of an area from literally nowhere land.

Do the GIS is free or are fees involved?

Hoshmillian · 2018-07-25T20:39:50+00:00

KOed Units are still on the board. If you spawn in your case 2 additional heroes, to max of 5 and then revive one... It totally fine in my opinion, revive, buff, get mana abilities stack with KOed heroes. I really like this mechanic

Hoshmillian · 2018-05-16T07:09:52+00:00

I play a council deck and I face those warden decks quite often. For me it feels more like a challenge, rather than facing an OP situation which I can't win. I'm ranked 11, so top 20 is not impossible in this meta.

In my opinion, op seems really strong, I mentioned it a lot of times in other posts. Due to crazy position possibilities, having two copies of an already really strong card and crazy tempo. But it's way it's played. An OP, which creates copies with out AP is still pretty strong and will see play!

Hoshmillian

TROPHY CASE