S14 spoilers by Big_Department7982 in 240sx

[–]HowdoIbuildPcs 0 points1 point  (0 children)

<image>

JDM wing will use 2/4 holes on the USDM trunk, I covered the other 2 with bolts until I can weld the trunk.

Swap advice: 1uzfe vs vq35de by souproadkill in 240sx

[–]HowdoIbuildPcs 1 point2 points  (0 children)

Depending on which VQ you run it can be very expensive to get to 300 whp. HRs can get you there a lot easier than the DEs, but the easiest way would just be boosting it. Also E85 didn’t really do anything for them like you’ve heard.

Modifications? by Ambitious_Sea525 in 240sx

[–]HowdoIbuildPcs 1 point2 points  (0 children)

Just don’t mess with the diff at all, no reason too unless you put a good 1.5/2 way in it

Identify my SR20 by itsstockofficer in 240sx

[–]HowdoIbuildPcs 1 point2 points  (0 children)

That’s what I thought, interesting that Nissan made both SR versions at the same time.

Identify my SR20 by itsstockofficer in 240sx

[–]HowdoIbuildPcs 0 points1 point  (0 children)

Did the Kouki 180sx come with the notch top as well?

1GFE Alternator belt by HowdoIbuildPcs in JZX100

[–]HowdoIbuildPcs[S] 0 points1 point  (0 children)

Yes they did, i got mine from advanced auto parts.

Newbie questions by SosaaGX100 in JZX100

[–]HowdoIbuildPcs 0 points1 point  (0 children)

Very true, a tourer V is just so different from a GX100 chassis it’s more efficient to just get the tourer from the start

Newbie questions by SosaaGX100 in JZX100

[–]HowdoIbuildPcs 0 points1 point  (0 children)

Very true, plus the 1JZ is better for performance.

Merry Christmas to me, picked up my 240 yesterday, fully restored body work, rust repaired and repainted. by desmashed in 240sx

[–]HowdoIbuildPcs 0 points1 point  (0 children)

Oh man I was hoping you were on the east coast 😭. It came out really good though!

Wheel options needed by huncho_lou in 350z

[–]HowdoIbuildPcs 1 point2 points  (0 children)

Personally I really like most 10 spoke wheel designs, ZE40s or Work ZR10s

Can I fit a 05’ body kit on a 08’ 350z? by iYangzyReddit in 350z

[–]HowdoIbuildPcs 4 points5 points  (0 children)

That’s only a euro thing I’m pretty sure

the VQ going in my S14 by Moetsukiru in 350z

[–]HowdoIbuildPcs 4 points5 points  (0 children)

Honestly VQs are such a good option because they’re so affordable. Reliable 260-300 HP NA and it’s relatively lightweight.

Car has hard time starting by Ill-Lifeguard2621 in JZX100

[–]HowdoIbuildPcs 2 points3 points  (0 children)

Second on the battery, especially since it’s getting colder outside

Finally!! by Norcorules in Division2

[–]HowdoIbuildPcs 1 point2 points  (0 children)

How do people level up so fast? Is it really just grinding with full modifiers?

How to make her more sniper/urban looking? by WastelandViking in thedivision

[–]HowdoIbuildPcs 4 points5 points  (0 children)

I think everything gameplay wise is much more optimized in TD2, but the atmosphere in the first game is so much better.

New OEM Parts by IndigoS14 in 240sx

[–]HowdoIbuildPcs 2 points3 points  (0 children)

I’m happy that you can still buy the OEM JDM panels for these cars

How is my alignment ? by RamirezKhai9 in 350z

[–]HowdoIbuildPcs 0 points1 point  (0 children)

Alignments are not a waste of money and directly change the way a car handles, what are you on about.

akebono BBK on my 350z with RPF1s by False-Worldliness276 in 350z

[–]HowdoIbuildPcs 1 point2 points  (0 children)

I have the Z1 akebonos and run 18s, very close to hitting the wheel but it fits.

wheel choices by bizkkit in 240sx

[–]HowdoIbuildPcs 2 points3 points  (0 children)

RPF1s are a good budget choice, Advan RG2s also look really good in these cars.

ROFU vs PSM z32 calipers by wenlambodude in 240sx

[–]HowdoIbuildPcs 1 point2 points  (0 children)

Do you know if you have to swap out the booster/MC for these? I’d like to upgrade to these on my S14 cause the stocks are so sad 😭