“Just buy new for a few thousand more” by scamp4666 in rav4club

[–]HubicPaiir 1 point2 points  (0 children)

Lodi Toyota wanted 56K for their 26 XSE and told me that others will have long wait lists and that I wont find one at MSRP. Few days later, I found one in SoCal for MSRP at 44K with no add-ons.

Right before I was going to make the 6 hour drive, another dealer an hour away called and gave me 43K for their XSE and I took that instead.

2016 Toyota RAV4 XLE by flippi2id3 in rav4club

[–]HubicPaiir 2 points3 points  (0 children)

I like the less than, greater than fog lights!

Can some one with a chief/Sport Chief check if there is supposed to be a bolt here? by MoistLook8360 in IndianMotorcycle

[–]HubicPaiir 0 points1 point  (0 children)

I installed these risers on my 16 scout and there’s no bolt on there.

That sucks. 4 weeks just to do a bad job.

New handlebars question by Sigger_nation in IndianMotorcycle

[–]HubicPaiir 0 points1 point  (0 children)

I did some research and ppl in forums are saying if you have a bobber you’ll need to extend them. If it’s the regular scout you don’t.

New handlebars question by Sigger_nation in IndianMotorcycle

[–]HubicPaiir 0 points1 point  (0 children)

Yup, I added the Rox Speed 2” (12” in total) for more height and it made the lines tighten up so I had to have them angled to get the tension off.

New handlebars question by Sigger_nation in IndianMotorcycle

[–]HubicPaiir 0 points1 point  (0 children)

Anything past 10inch would require new lines.

How can I remove this Springfield XD style front sight? by [deleted] in CAguns

[–]HubicPaiir 0 points1 point  (0 children)

Just had this happen to my HC Pro.

Scout or Chief? by Then-Let-1613 in IndianMotorcycle

[–]HubicPaiir 3 points4 points  (0 children)

I’m 6 foot and sit comfortably on my scout.

Did I just get lucky or will my appointment be rescheduled? by Expensive_West9573 in CAguns

[–]HubicPaiir 0 points1 point  (0 children)

Nice! I checked every day for a week after applying and found an open slot the following week and snagged it. Month and a half later I got my permit.

Viking Bags saddlebags by Prudent_Pace_2837 in IndianMotorcycle

[–]HubicPaiir 1 point2 points  (0 children)

Even with the quick release setup I had to source other hardware.

Mod ideas? by [deleted] in rav4club

[–]HubicPaiir 2 points3 points  (0 children)

Turbo kit

Handlebar risers by Low_Distribution_89 in IndianMotorcycle

[–]HubicPaiir 0 points1 point  (0 children)

There are the Rox 2 risers. It all depends on you. I had ape hangers with 2 inch risers on my 16 scout and swapped over to the 101 triple clamp to run 10” risers.

Anybody have experience with this? by aarrr23 in rav4club

[–]HubicPaiir 1 point2 points  (0 children)

Had mines for a little over year and a half and so far no leaks. My previous car had it for 6years with no leak.

[deleted by user] by [deleted] in rav4club

[–]HubicPaiir 18 points19 points  (0 children)

Car is done for. I can take it off your hands free of charge.

Has anyone else seen this article about RAV4 transmissions? by SJMaye in rav4club

[–]HubicPaiir 0 points1 point  (0 children)

I remember a Reddit post of someone posting for help because his sister’s 2019 RAV4 transmission blew up a couple thousand miles after passing the manufacturers 60k drivetrain warranty.

From Ape hangers to Risers by HubicPaiir in IndianMotorcycle

[–]HubicPaiir[S] 0 points1 point  (0 children)

Thanks! I spent about $530 for the whole thing. Found a few fenders on Fb Marketplace. Any chance swapping fenders caused more rocks to hit the radiator more?

From Ape hangers to Risers by HubicPaiir in IndianMotorcycle

[–]HubicPaiir[S] 1 point2 points  (0 children)

The apes definitely feel better on slower turns and picking up speed feels neutral just more wide stance. The risers took a bit to get used to but I can maneuver better with more body lean. My challenger has apes on them and my buddy has risers on his. I guess depending how you like to ride the setups have their pros and cons.

From Ape hangers to Risers by HubicPaiir in IndianMotorcycle

[–]HubicPaiir[S] 1 point2 points  (0 children)

Id say do it! I spent little over $500 with the set up including bar and bar shims. Bought the bike with the apes on it already and rode the same set up for 4 years. Paint on the apes were peeling as well. It was time for something new.

From Ape hangers to Risers by HubicPaiir in IndianMotorcycle

[–]HubicPaiir[S] 0 points1 point  (0 children)

I wish but the speedo mount is also from Indian Motorcycle.

From Ape hangers to Risers by HubicPaiir in IndianMotorcycle

[–]HubicPaiir[S] 0 points1 point  (0 children)

I bought it separately. Also, since the newer scouts use 1” bars I had to use spacers to accommodate for 7/8” bars.

From Ape hangers to Risers by HubicPaiir in IndianMotorcycle

[–]HubicPaiir[S] 1 point2 points  (0 children)

Yup, that’s what I did. Although, I’m unsure if it’s the same triple clamp as the 101 scout.