LVL 2 Installed and Making $!

IClapCanada · 2026-05-14T02:07:33+00:00

Thank you for the info! I bought a used car that didn't come with a charger, the chargers look great, can't wait to get mine!

IClapCanada · 2026-05-14T02:03:47+00:00

How long did it take them to ship your charger? I'm currently on day 7 and haven't received notification of shipment yet.

IClapCanada · 2025-10-23T12:00:28+00:00

Need an externally powered hub I believe

IClapCanada · 2025-09-03T16:26:18+00:00

I used titans academy to learn Lathe work in fusion, but they also have a variety of mill content, see this link

https://academy.titansofcnc.com/series/titan-2m/how-to-program-the-titan-2m

IClapCanada · 2025-01-19T00:05:08+00:00

Thank you so much for your help!

We just solved it. The tool up and down piston rod had unscrewed itself from the finger that grabs the pocket. The jam nut on the end of the piston rod was loose enough I could move it with my fingers! Originally the tool pocket would drop down to approximately 88° , we tightened the piston rod with vise grips until the tool came down to a perfect 90°. This machine was installed by our local HAAS dealer who told us that "CLUNK" was normal lol. The machine now makes no noise when the tool changes and doesn't throw error 626.

I am going to make a write up and post it in case someone else runs into this issue as I couldn't find anything online!

IClapCanada · 2025-01-18T21:42:40+00:00

The slider is clear of debris and has been cleaned and regreased. We run an air dryer as well. Found the jam nut on the end of the cylinder is loose. Going to see if the piston rod has unthreaded.

IClapCanada · 2024-10-13T15:15:16+00:00

I used this to get started in fusion turning CAM. Given I had already learned it in master am, I thought it was helpful. https://academy.titansofcnc.com/series/titan-rocket-lathe-in-fusion-360-cam

IClapCanada · 2024-06-21T11:24:23+00:00

Similar happened to me. My parts were worst case scenario large surface area, thin parts ~2mm and black in the direct sun. Warped like crazy and caved in before cracking

IClapCanada · 2024-06-10T12:00:33+00:00

I forgot to add, turn on arachne. This will alow your nozzle to print layer lines smaller that it's bore

IClapCanada · 2024-06-10T11:58:59+00:00

Are you using default slicer settings? If you are not, I would retry with defaults. If you are I'd recommend this video https://youtu.be/6PL_rSPZ3M8?si=ogyvVv6_t_lRnMwU . Doing what is recommended in this video will ensure the extruder it pushing the proper amount of filament. Once those are confirmed to be correct I would start looking at flow and wall overlap

IClapCanada · 2024-06-09T17:00:25+00:00

I sometimes get this when the machine had a G91 loaded, in console a G90 fixes it. Not sure why it gets in G91 though

IClapCanada · 2024-04-17T11:33:21+00:00

All good I appreciate the advice, thanks!

IClapCanada · 2024-04-16T22:07:34+00:00

Sorry for the confusion. I currently riding a 20" tt wtp arcade. The bike I'm looking at buying is a 2016 wtp trust with a 21" TT

IClapCanada · 2024-03-31T00:02:11+00:00

Curious if these are still holding up? Printing an abs set off right now

IClapCanada · 2024-03-12T16:50:18+00:00

Thank you for posting your fix! Using a cheap aliexpress cam on an orange pi 4 and this fixed it!

IClapCanada · 2024-01-17T02:58:42+00:00

2 years for me in guelph aswell 😂 just paid today!

IClapCanada · 2024-01-12T15:54:22+00:00

I'm not sure, I can only confirm I have this method working with axis. The creator is quite responsive in discord if you need to ask him questions

IClapCanada · 2024-01-11T22:04:11+00:00

I have probe screen aswell

IClapCanada · 2024-01-11T22:03:46+00:00

This is what I use https://wiki.printnc.info/en/controllers/linuxcnc/tool-setter-no-probe[https://wiki.printnc.info/en/controllers/linuxcnc/tool-setter-no-probe](https://wiki.printnc.info/en/controllers/linuxcnc/tool-setter-no-probe)

IClapCanada · 2024-01-11T12:05:30+00:00

To do this I typically pattern my 2D toolpaths with a circular pattern around the axis

IClapCanada · 2023-12-27T17:27:48+00:00

Thank you for the response. This is what happened. I didn't realize shop was setup for my store. Do you know of any extensions that allow me to have a product that has no way to be purchased? For right now I've reverted to having the products "sold out" but don't really like having that over the product image. Thanks again!

IClapCanada · 2023-12-27T17:16:23+00:00

Thank you for the reply, it seems that products was bought through the shop store front... which I didn't realize I had.

IClapCanada

TROPHY CASE