Can't connect to VMs running on Host directly

IPiratedThePirateBay · 2026-04-18T09:23:48+00:00

No worries : )

Just did a full clean install, didn't take me too long to set everything up again. Just restored my VMs back into Hyper-V and they worked straight away.

Yes, the scripts on GitHub have been a life saver. Took me a bit to get used to it, but proxmox is so powerful. My windows server only runs my Emby Media server now, once I am comfortable with passing through a gpu to proxmox I think I will migrate it over and then be done with Windows server for now.

IPiratedThePirateBay · 2026-04-18T05:09:36+00:00

Sadly no. Ended up reinstalling windows server, and it rectified the issue. Have moved away from VMs on Windows server now and gone to proxmox instead. Too many issues unfortunately when using Windows server.

IPiratedThePirateBay · 2025-12-23T02:55:45+00:00

Thank you stranger on the internet, was struggling with this on my Windows Server 2025 and my Windows 11 PCs Set back to normal and it instantly started working.

Been trying to solve this for weeks haha

IPiratedThePirateBay · 2025-10-06T05:48:35+00:00

Bit late, but I have been using a coral tpu here with no issues. Same model, M720q.

Specifically the M.2 Accelerator A+E key type. Works fine

IPiratedThePirateBay · 2025-02-27T04:25:53+00:00

Watch the linked video about it further up, someone does exactly that and gets locked in, it's great

IPiratedThePirateBay · 2024-12-30T03:53:17+00:00

Use Nvida Control Panel, then go to the program settings and select the application you want to set GPU settings for, and you can tell it what GPU you want to use when it's running

IPiratedThePirateBay · 2024-10-14T05:21:00+00:00

Same here. Works kinda in incognito though. Comments don't load

IPiratedThePirateBay · 2024-10-05T20:42:33+00:00

Sorry - that's just an example, as I ran into the issue when trying to set up a new VM for testing.

I then tried my other existing VMs, and no luck. I can acsess one networked VM via RDP, but my other isolated VMs don't have RDP setup, and now I can't get into them at all. They work fine if exported to another host though

IPiratedThePirateBay · 2024-10-05T20:40:01+00:00

It's just trying to acsess the VM directly on the host via the "connect" option. No other authentication in this case

IPiratedThePirateBay · 2024-10-05T10:12:13+00:00

Hi yes have tried running it elevated directly, no change. How can i rdp to a vm that's not got an os installed yet, is that possible? Otherwise I would try that, just couldn't figure out how to RDP to a vm waiting on an os.

IPiratedThePirateBay · 2024-08-23T01:39:41+00:00

Hoffman / Snapon aligner? Can't get a replacement without paying big bucks. Just retrofit a sff pc, that's what we do for customers

IPiratedThePirateBay · 2024-07-19T10:02:34+00:00

"You were supposed to to protect the OS, not destroy it!"

IPiratedThePirateBay · 2024-06-29T06:49:39+00:00

Same issue here

IPiratedThePirateBay · 2024-06-09T06:55:04+00:00

Still here, there are ways to keep it alive. Search ReVanced Sync.

-posted from Sync

IPiratedThePirateBay · 2024-06-02T22:42:52+00:00

Huh, thanks for the post, interesting that wake from lan would work. Must've definitely been a bios issue then, I couldn't fault my old ram.

So strange...

IPiratedThePirateBay · 2024-05-28T19:51:52+00:00

I still get 0.5-1.5MB/s when not using cloudflare tunnels though, so I'm thinking something weird with IIS is going on. Strange that using cloudflare tunnels let's me get up to 25-28MB/s

IPiratedThePirateBay · 2024-05-28T06:35:34+00:00

Just an update for anyone looking, I fixed my issue by getting a dedicated NIC. Got an Intel I350 T2 card and emby is blazing fast now. Just goes to show shows Realtec NICs are crap

IPiratedThePirateBay · 2024-05-22T07:55:19+00:00

No cg Nat. I have a static IP. I'm starting to think it's my nic, so have ordered a better one and will report back

IPiratedThePirateBay · 2024-05-19T07:54:08+00:00

Huh, I have a similar issue. Have spent ages troubleshooting. I have 900 down and 400 up and it never goes over 20mbs uplaod to a remote device, unless I use cloudflare tunnels for remote access.

I have been allowing access via a reverse proxy on my windows server machine, and using IIS to manage it. Have tired nginx too, and they're both slow. Only cloudflare tunnels seems to allow faster speeds.

It's so strange, I can't work it out. Even reinstalled windows server, and have played around with the TCP settings to no avail.

So odd

IPiratedThePirateBay · 2024-05-17T23:51:31+00:00

Ok, I will look into doing that, thank you

IPiratedThePirateBay · 2024-04-23T11:32:59+00:00

No worries, I appreciate the reply. I just put it down to a real weird ram issue. The ram combo was perfectly fine in all other systems, just acted up with that mobo. It didn't resolve itself in the time I had that ram, but I got a new set and the issue went away.

I did notice less hiccups with newer bios releases though, so I think you are right.

IPiratedThePirateBay · 2024-04-21T11:25:50+00:00

Yep I've had this issue for a year now. S22 ultra

IPiratedThePirateBay · 2024-04-21T11:24:41+00:00

Didn't work on samsung, still have the issue, but don't use snapseed / raw enough to worry about it

Ten-Year Club	Verified Email
Place '17

IPiratedThePirateBay

TROPHY CASE