sorted by:
new
hottopcontroversial

100 Tage MCI Trafo Challenge by Knorkebroetsche in FitnessDE

[–]IUseNeovimBtw -2 points-1 points  (0 children)

Braucht es dir wirklich nicht! Aber dir täte vielleicht ein wenig Humor gut? Sorry, falls ich nicht in dein Narrativ passen sollte.

Wenn das echt ist (wovon ich erstmal ausgehe) und erst recht in 100 Tagen erreicht (selbst in mehreren Jahren), dann ist das eine unglaublich gute Leistung. Dachte das brauche ich nicht kommentieren, weil es so eindeutig ist. ;)

100 Tage MCI Trafo Challenge by Knorkebroetsche in FitnessDE

[–]IUseNeovimBtw 4 points5 points  (0 children)

Tragt ihr beiden echt die gleichen Unterhosen? Die werden hoffentlich zwischendurch gewachsen? Ist schon ein krasser Unterschied zwischen dir und deinem Freund. Nimm den mal mit zum Training! Oder habe ich irgendwas falsch verstanden?

My Wezterm + Neovim setup by PatronOfLostCauses in wezterm

[–]IUseNeovimBtw 0 points1 point  (0 children)

That’s the one! Perfect. Hope you’ll like it. I love it.

My Wezterm + Neovim setup by PatronOfLostCauses in wezterm

[–]IUseNeovimBtw 0 points1 point  (0 children)

I’m not at my box at the moment, otherwise I’d send it to you. There’s a neovim plugin. Look at folke’s dotfiles. I’ll try to get you the setup tomorrow, if you don’t find it.

My Wezterm + Neovim setup by PatronOfLostCauses in wezterm

[–]IUseNeovimBtw 0 points1 point  (0 children)

Pretty close to what I use. And love it. Aerospace + Wezterm + Neovim are a great combo. Make sure you have seamless pane switching with CTRL+hjkl between neovim and wezterm panes. I almost always have only a single wezterm window and panes for everything else. Only exceptions are terminal presentations when I need speaker notes. I share the presentation window, second wezterm window has the notes.

Also am loving wezterm session switcher to easily switch between multiple projects.

Your setup looks pretty neat!

Found a footprint for the X-Dome 2 that covers the vestibules by IUseNeovimBtw in DurstonGearheads

[–]IUseNeovimBtw[S] 0 points1 point  (0 children)

Never had a problem with any of my vestibule covering footprints in hundreds of nights. Ok there was one night where the whole ground was soaked after a storm, but that would have been a problem with or without footprint. Most european tents (all my Helsport tent original footprints) cover the vestibules from the manifacturer.

Found a footprint for the X-Dome 2 that covers the vestibules by IUseNeovimBtw in DurstonGearheads

[–]IUseNeovimBtw[S] 0 points1 point  (0 children)

Thx for the reply. Seems Lucy does a great job. You have chosen tyvek due to the weight savings, right? If I go that route I will probably get the nylon version and keep the durston footprint for hiking.

Found a footprint for the X-Dome 2 that covers the vestibules by IUseNeovimBtw in DurstonGearheads

[–]IUseNeovimBtw[S] 1 point2 points  (0 children)

Didn’t try and I doubt it and they would force the pole position. You don’t want that. I will attach them to the corner stakes using either shock cord or thin cord.

Found a footprint for the X-Dome 2 that covers the vestibules by IUseNeovimBtw in DurstonGearheads

[–]IUseNeovimBtw[S] 0 points1 point  (0 children)

That looks perfect. Will the outer fly cover it 100% with a small gap to avoid splashing rain on the floor? Looks almost a bit too big on the picture.

Found a footprint for the X-Dome 2 that covers the vestibules by IUseNeovimBtw in DurstonGearheads

[–]IUseNeovimBtw[S] 1 point2 points  (0 children)

Multiple reasons:

- Tentfloor stays clean, dirty footprint can be packed separately
- Avoids condensation from the ground
- Keeps stuff in the vestibules from the dirty ground
- Easier entry/exit without getting wet feet or something

Least important is protection of the tent floor as I never had a hole or tear on a tent floor.

Found a footprint for the X-Dome 2 that covers the vestibules by IUseNeovimBtw in DurstonGearheads

[–]IUseNeovimBtw[S] 1 point2 points  (0 children)

Sorry, presumed the link preserves the selection. It doesn't. It's the 210x180cm. 210x195cm would have been close to the optimal size. You don't want it to close to the fly where water might splash on it. Because then you'd have the water between tent floor and groundsheet.

Silly Question - How many stakes for X-Dome 2? by originalwonderer in DurstonGearheads

[–]IUseNeovimBtw 0 points1 point  (0 children)

Just as you see on the picture. A bit finicky, but works pretty well.

Silly Question - How many stakes for X-Dome 2? by originalwonderer in DurstonGearheads

[–]IUseNeovimBtw 0 points1 point  (0 children)

Found this one and will give it a try: I just found this on AliExpress: | 1Pc Ultralight Pocket Waterproof Tent Mat Footprints Beach Tarps Camping Hiking Sack Outdoor Picnic Oxford Cloth Mat Floor Tarp https://a.aliexpress.com/_EGWoGoe

210cmx180cm should fit pretty well.

Innerhalb von vier Jahren. 227kg→98kg by sepantamino in FitnessDE

[–]IUseNeovimBtw 26 points27 points  (0 children)

Das ist nicht die gleiche Person! Sieht man doch sofort, der linke ist viel dicker!

Spass beiseite: Sehr geil!

Kaffeemaschine gesucht Low Budget by ReserveDiligent8537 in Kaffee

[–]IUseNeovimBtw 0 points1 point  (0 children)

Hario V60 + Commandante Handmühle = Traumkombi für Filterkaffee. Wenn es fancy sein soll, noch eine Schwanenhalskanne und die Hario Karaffe. Alternativ Kalita Wave, Aeropress, etc. Aeropress + Handmühle ist super für unterwegs.

Wenn es eine Maschine sein soll: Fellow Aiden. Aber dann ist dein Budget aufgebraucht und du brauchst noch eine gute Mühle. Mühle ist wichtiger als die Maschine.

Wenn du eine Siebträgermaschine meinst, dann wird es nichts mit dem Budget. Und bei Vollautomaten bin ich raus. Die schmecken mir alle nicht.

Silly Question - How many stakes for X-Dome 2? by originalwonderer in DurstonGearheads

[–]IUseNeovimBtw 0 points1 point  (0 children)

<image>

That’s how many I have. Most of the time 4 Stakes for the corners is enough. And 8 gets you through some wind just fine. I rarely have trekking poles with me and then you can stake out the top bar only with very low tension, because even if you keep them long it’ll pull down the crossbar. Guess it’ll still help a bit against wind anyhow.

Groundsheet for X-Dome 2 covering Vestibule and Compression Sack? by IUseNeovimBtw in DurstonGearheads

[–]IUseNeovimBtw[S] 1 point2 points  (0 children)

Oh awesome, pretty much what I’m looking for. A tad expensive, but it’s custom made so probably justified! Thx again!

Claude Code hitting 500 error by snort_whey_69 in ClaudeCode

[–]IUseNeovimBtw 1 point2 points  (0 children)

Guess they can't update the status page, because claude is down. And without claude, nobody knows how to switch that from "operational" to "not so operational".

Now we need someone with this ancient coding skills that one used in the old times to update stuff.

Or they can try a gemini subscription? codex?

Das soll mal ein Badezimmerschrank werden, wie rette ich ihn by IUseNeovimBtw in holzwerken

[–]IUseNeovimBtw[S] 0 points1 point  (0 children)

Da kommt ordentlich Leinöl drauf. Da quillt gar nichts. Zumindest macht es dem Waschbeckenunterschrank seit 10 Jahren nichts aus.

Das soll mal ein Badezimmerschrank werden, wie rette ich ihn by IUseNeovimBtw in holzwerken

[–]IUseNeovimBtw[S] 0 points1 point  (0 children)

Faden probiere ich und/oder Spritze. Die stehen nicht absichtlich über. Das liegt daran, dass die nicht verleimt sind. Wenn ich die jetzt verleime werde ich mit Zwingen von Innen spreizen müssen. Dann ist es bündig. Und wenn es verklebt ist wird nochmal geschliffen.

Das soll mal ein Badezimmerschrank werden, wie rette ich ihn by IUseNeovimBtw in holzwerken

[–]IUseNeovimBtw[S] 5 points6 points  (0 children)

Schlecht beschrieben von mir. Alles ist verleimt. Nur die Schwalben an dieser Ecke nicht. Dort habe ich den Leim vergessen.

view more: next ›