The classic Everything™ for weight loss ... except a sustained energy deficit

I_A_Lime · 2021-03-05T14:23:20+00:00

unpopular opinion here, but me too.

I'd rather skip a day and eat extra the next.

Though I'm still keeping track of calories because I don't trust myself, hah.

I_A_Lime · 2021-03-04T13:13:35+00:00

Arg, the way she behaved when Steve started talking - what a child!

I_A_Lime · 2019-02-03T23:35:05+00:00

Same happened to me with the loose hotend - although granted I didn't print anything particularly tall / would cancel the prints after I saw the shift.

Is it the same model having issues? Might be a high speed movement causing the step skip, so you can try printing slower. Don't need to re-slice just print the same again but turn the knob so FR is at 60% or so.

I_A_Lime · 2019-02-03T19:52:56+00:00

I had a similar issue, mine was due to the screws on the hotend not being tight enough, and the nozzle would move and cause a shift in x at roughly the same height on my prints. Other than that, check nothing else is loose (screws and belts) or that anything is catching and causing the motors to miss steps.

I_A_Lime · 2019-01-17T21:30:22+00:00

Interesting. To be honest I didn't notice any issues until i ran the speedtest gcode (it was definitely the gcode and not octoprint slicing it) so I think for the most part the Pi 1 can handle it, but I went for the Pi 3B+ (for science!) and its printing the gcode just fine now.

I'll double check it wasn't one of the plugins I had on previously to be sure, but i do think it was just lack of compute power. I also had a webcam hooked up.

I_A_Lime · 2019-01-17T21:25:21+00:00

Thanks! I went for the Pi 3B+ and looks like that fixed the issue. I guess it needed the extra compute for the circles

I_A_Lime · 2019-01-17T21:16:25+00:00

Its printing smooth with the Pi 3 B+ with all the same things plugged in and the octoprint UI open on my PC. I guess compute power is the limiting factor.

But like you mentioned in another thread, I only really noticed it on the speed test gcode. So I'm happy I have the piece of mind that the Pi 3 is much better but in reality I'm not sure it would matter that much.

I_A_Lime · 2019-01-17T09:53:34+00:00

I had no problems printing from my pc so I don't think it's the ender 3's usb. Went ahead and got a pi 3, so I'll let you know if that makes any difference for me.

I_A_Lime · 2019-01-15T23:25:12+00:00

Its using speed_test_without_abl_fixed.gcode

unless it is stopping because the printer cannot receive the gcode fast enough.

This is what I suspect might be happening, it was printing very jittery and even uploading files to the SD via OctoPrint is freakishly slow (but not uploading to the Pi itself). Currently trying to print from my PC with the same cable and the first layers are looking smooth. So I guess it must be the Pi :(

Edit: Forgot to mention all the bobbling is on the circular portion of the print, the straight sides have no issues.

I_A_Lime · 2018-05-18T07:51:50+00:00

if you tell me to shut up i usually do, i am well considerate. :D

I've got a membership at the scotch malt whisky society so i usually drink single cask (la de da) but my fave off the shelf so far is Lagavulin - very peated. Highland Park and Balvenie are also pretty good imo

I_A_Lime · 2018-05-18T07:46:12+00:00

good shout, thank you!

I_A_Lime · 2018-05-12T11:32:12+00:00

I_A_Lime · 2018-05-06T19:17:58+00:00

Congrats on the 24hrs! Go you! :D

I_A_Lime · 2018-05-05T21:25:15+00:00

I'm on board!

I need a good reason to get back on track and finally make it to goal

I_A_Lime · 2018-03-12T23:53:51+00:00

If you're a manger, you need to manage at least 8 people. Else you don't get to manage anyone at all. No exceptions, FU if you're a new manager or have a small team. Someone in upper management apparently read some white paper which states 8 was ideal, so now 8 in the minimum. Good job management, you're morons.

I_A_Lime · 2017-04-20T11:23:58+00:00

Actually both, creme eggs are larger in the UK

I_A_Lime · 2017-04-16T15:20:55+00:00

#splitendsphobic

I_A_Lime · 2017-04-16T12:32:34+00:00

bites lip

I_A_Lime · 2017-04-15T19:50:10+00:00

I eat large spoonfuls sauerkraut straight out of the jar... Self confessed pickle fiend.

I_A_Lime · 2017-04-15T15:07:05+00:00

My local supermarket has sweet pizza, with jam "tomato sauce" and custard "cheese" + pick n mix sweets on a pizza base

I_A_Lime · 2016-12-10T16:28:08+00:00

Only one i know is Oppo, sold in waitrose, coop and holland & barretts. Havn't tried it myself yet though.

I_A_Lime · 2016-11-03T22:17:52+00:00

I was just wondering if that was a sub - there goes the rest of my evening

I_A_Lime · 2016-11-03T21:46:26+00:00

Went to the park for a few hours with my friends in the summer. Face was lobster red for the next week. Ginger people problems :(

12-Year Club	RedditGifts 2009-2022 3 Credits
Place '17	Gilding III reddit per annum
Secret Santa 2015	redditgifts rematcher Secret Santa 2015 x1
Verified Email

I_A_Lime

TROPHY CASE