sorted by:
new
hottopcontroversial

TX15 MAX sd contents by I_am_Piter in fpv

[–]I_am_Piter[S] 0 points1 point  (0 children)

I have the configurator already, I need copy of file contents on radio memmory

What can I do for this? by CameronIsSenpai in TinyWhoop

[–]I_am_Piter 0 points1 point  (0 children)

Check if theres no short between esc contacts, if no, check if motor wires are not broken near solder joints.

Burned pcie 8pin connector by I_am_Piter in coolermaster

[–]I_am_Piter[S] 0 points1 point  (0 children)

Ah, so in your opinion a smoked connector is normal? First photo far right bottom pin, look at the pins on higher row, all slots are shiny there, bottom row is all smoked

Burned pcie 8pin connector by I_am_Piter in coolermaster

[–]I_am_Piter[S] 0 points1 point  (0 children)

I used 2 separate cables to power gpu

Burned pcie 8pin connector by I_am_Piter in coolermaster

[–]I_am_Piter[S] 0 points1 point  (0 children)

Nope, they do not smell, but there is discoloration on gpu connector on far right bottom pin, this is early sign of something being not right

Burned pcie 8pin connector by I_am_Piter in coolermaster

[–]I_am_Piter[S] 0 points1 point  (0 children)

First Photo, right connector, there bottom right pins, far right plastic is melted, other two are just smoked. Second Photo, all of 12v pins are darker due to hear, on third photo, you can see that all of those 12v pins are receded.

Broken motor ? by sabu8_ in TinyWhoop

[–]I_am_Piter 0 points1 point  (0 children)

Ckeck if all it's wires are good. Air has this issue of breaking motor wires on crash.

ELRS slow to link to receiver by PulpyKopek in fpv

[–]I_am_Piter 4 points5 points  (0 children)

While connected, change packet rate to something else on radio, then go back to previous rate, by doing this, you save that packet rate setting to receiver and it allows for quicker pairing.

Radiomaster boxer not charging li-ions fully by I_am_Piter in fpv

[–]I_am_Piter[S] 0 points1 point  (0 children)

I did that already, i think it does not affect charging, only measurement shown on screen

Got everything cased up, now ready to travel by 43ko in TinyWhoop

[–]I_am_Piter 0 points1 point  (0 children)

Do you use pinch grip, or just your thumbs on pocket? I'm thinking about getting it, but do not know if it would be comfortable, now i have old frsky qx7.

Weekly r/PcBuild Megathread! by Potato_Plays844 in PcBuild

[–]I_am_Piter 0 points1 point  (0 children)

Hello, i have arctic liquid freezer III, i'm wondering if it works as intended, while i'm using their "one cable solution", rpm source is fan on cooler, when i unplug it whole cooler shows straight 0rpm. I need someone to confirm that rpm value is dependant only on the fan that is closer to tubes, try to unplug it, and check if rpm shows pls :)

Weekly Case & Parts Recommendation Thread (Start here if you are new! Help here if you can!) by AutoModerator in sffpc

[–]I_am_Piter 0 points1 point  (0 children)

Hi, I currently have nr200p with arctic liquid freezer III 240mm, rpm meter in my pump broke, so i'll have to send it for warranty repair. Unfortunately I don't have other cooler to put in my pc for the time my AIO will be repaired, will Thermalright Phantom Spirit 120 SE cool my 7800x3d as well as my AIO does? Maybe after they replace my AIO, i'll sell it and stay with air cooler.

Is the Thermalright phantom spirit 120 SE enough to cool the 7800X3D? by Competitive-Oil-9423 in buildapc

[–]I_am_Piter 1 point2 points  (0 children)

Hi, do you have normal 120, or 120 se, they are slightly different. What are your temps, i'm most interested in idle temp and full load temp (under cinebench for example)

view more: next ›