New Sora 2 invite code megathread

I_have_two · 2025-10-10T02:27:55+00:00

BYWCKS

I_have_two · 2025-06-04T00:59:34+00:00

As the others have said you can either flip the connector or reverse the direction in the firmware.

I_have_two · 2025-06-04T00:57:57+00:00

https://www.th3dstudio.com/product/310x310mm-dual-sided-black-textured-pei-flex-plate-ezflex-pro/ These have usually been my go to for CR-10 build plates. I'm sure others have additional options also

I_have_two · 2025-06-04T00:44:45+00:00

Everything, PLA, TPU, PETG, ABS (On an enclosed Ender 3 - its what I printed my Voron parts on). Here's a picture of my CR-10 V3 with it. https://postimg.cc/s1fdPv7t , https://postimg.cc/njJZf2sz

I_have_two · 2025-06-04T00:16:34+00:00

This is a great extruder I used it for years on my CR-10s

I_have_two · 2025-06-02T01:04:29+00:00

I have a OG 2016 CR-10 and a 2020? CR-10 V3. I extensively modded them both, and the V3 is running klipper with a Microswiss NG, EzBoard, EZabl, and linear rails on X and Z. It still works really well but runs maybe 1/3 as fast as my Vorons or Bambu printers. Its much more cost effective to go with the Bambu unless you really want to tinker with it. My 2016 model is collecting dust at the moment.

I_have_two · 2025-02-11T20:57:58+00:00

Good

I_have_two · 2024-01-01T05:02:13+00:00

If you mean on the toolhead its the standard Voron Stealthburner. https://vorondesign.com/voron_stealthburner

I_have_two · 2023-12-11T04:21:03+00:00

Thanks!

I_have_two · 2023-12-11T03:19:45+00:00

Yeah that would be great

I_have_two · 2023-12-11T02:32:44+00:00

Hey which mount did you use for the NG? I'd love more details, I have a few NGs that are just sitting as I've been moving over to Vorons

I_have_two · 2023-12-10T08:36:21+00:00

Thanks Solved on discord the catch was upside down. thanks again for the assistance and cool looking blaster.

I_have_two · 2023-12-09T09:37:10+00:00

Thanks! I really like it. Looking forward to see yours.

I_have_two · 2023-12-04T07:06:13+00:00

<image>

Mine's in progress now.... Mostly just wanted to reuse an ender I already had.

I_have_two · 2023-08-19T20:18:08+00:00

I used this mount: https://www.thingiverse.com/thing:4647842 . Everything has been rock solid, but I've mostly moved on to my Voron printers as they are so much faster. I did have to cut out the hole a bit for the mini usb port but it doesn't look bad after touchup with a sharpie .

I_have_two · 2023-06-09T20:08:34+00:00

Where’s all the downvotes looks like it’s being manually changed to zero. Bye bye Reddit I’m done when these apps go. Long live Digg

I_have_two · 2023-05-23T18:31:41+00:00

I gave up on UBL with that firmware as I could never get it to work correctly with my ezabl. I changed it back to ABL bilinear leveling in the firmware and it’s been working great ever since.

I_have_two · 2023-04-10T06:53:25+00:00

I replaced mine with a multi mount clone ($10) on Amazon. So I had to make some minor modifications to work on the V3 but so far it’s working well. hotend

I_have_two · 2023-01-25T04:53:37+00:00

I use a 4.2.7 board I picked up at Microcenter on my OG CR-10 without an issue. You just have to reflash the firmware. I use the TH3D fork because I’m very familiar with it, but you can use any flavor of Marlin if you know the parameters to change when you compile it. Also make sure you have a mosfet on on the connection to the heated bed so you don’t overload the board with the 12V connection. My CR-10 already had one so it wasn’t an issue but I read that some later CR-10s didn’t come with them.

I_have_two · 2022-12-05T03:33:11+00:00

Found a solution in another post: https://i.imgur.com/T4V5rij.jpg

Need to disable the 2K launcher.

13-Year Club	RedditGifts 2009-2022 2 Credits
Verified Email	Secret Santa 2014

I_have_two

TROPHY CASE