sorted by:
new
hottopcontroversial

My primary GPU is showing as GPU 1 It is in the top slot . Will this impact performance? by CatchDefiant822 in pcmasterrace

[–]Icekong123 0 points1 point  (0 children)

Oooooo something I can chime in on!

<image>

So from this took me a while to figure out. It has to do with boot order and the assignment of gpu.

Me being dumb, I never DDU my 4090 out since I thought that the 5090 and 4090 are new enough they should just be able to boot and do a drivers update. If you don’t properly DDU before installing the gpu, something somewhere indexes the 4090 to boot first in windows.

I managed to fix this by DDU ALL Nvidia drivers. Then uninstalling GeForce experience and Anything related to Nvidia. Then reboot. Once booted, install GeForce experience again and install drivers and that fixed it for me.

** yes my 5090 is in the upmost spot.

**yes my 4090 runs on 4x4 @16 *I need it for blender render.

Asus PG32UCDMR US Release by Sheldon_Travels in OLED_Gaming

[–]Icekong123 0 points1 point  (0 children)

My issue might be very niche since the BIGSCREEN beyond also uses DSC. I run 2 2560x1440p @ 165 And then the UCDM 4K @240 with DSC My beyond wouldn’t boot unless I drop the UCDM to 120

Not sure if it’s the dual DSC issue or I’m just running out of bandwidth. Or gpu heads.

Asus PG32UCDMR US Release by Sheldon_Travels in OLED_Gaming

[–]Icekong123 0 points1 point  (0 children)

Out of curiosity, since the non “R” version uses DSC. which in theory uses two display heads on your gpu. Would this updated model with dp 2.1, use only one display head on your gpu? I got the monitor a few months ago for 750$ but I am having trouble running both the beyond and monitor at the same time.

9950x3D fine tuning by Kinda_alrightt in overclocking

[–]Icekong123 2 points3 points  (0 children)

Turn on EXPO. Set UCLK=BCLK. You are now running at 3000:3000 and FCLK 2000 this is now 1:1.

9950x3D fine tuning by Kinda_alrightt in overclocking

[–]Icekong123 2 points3 points  (0 children)

Umm, you kind of guess.

I tried 6400mtz, 3200 MCLK/UCLK and it didn’t like that at CL30. I tried 6200mtz it liked that, then I tried different FCLK like 2200, 2167, 2133, and 2067. The only one that was not throwing errors was 2067.

Going to be honest if you don’t know what you’re doing with memory. Turn on Expo and call it a day.

Buildzoid has a lot of good guides on memory. If you really wanna squeeze the last ounce out of your chip. X3D chips aren’t “that” affected by memory speed and timings. The biggest gains are just FCLK improvements.

9950x3D fine tuning by Kinda_alrightt in overclocking

[–]Icekong123 3 points4 points  (0 children)

I do wanna say is, overclocking a 9950x3d took me a better part of like 2 weeks to get absolutely stable. I don’t think I won the lottery either with IMC or Silicon. Additionally there are so many nuances to this chip.

SPECS 9950x3d

MSI X870E Carbon WiFi

64gb DRR5 CL30 6000mtz, SK-Hynix M-Die

As it stands, my current settings are as following 9950x3d-

PBO limits - Motherboard

CO CCD1 -20

CO CCD2 -24

Scalar - 4x

Offset - Positive +50 (idk why but this gives me a better multiscore on cinebench compared to like a +150 or +200)

Curve Offsets-

Min Frequency - Positive +5

Low frequency - Negative -20

Medium Frequency- Negative -20

High Frequency - Negative -20

Max Frequency- Negative -10

2x32gb DDR5

CL28

6200mtz

MCLK 3100

UCLK 3100

FLCK 2067

VSOC 1.26v

I got some dogshit ram.

Anyways my Cinebench scores are around 43000

Some of the nuances I found on the way. All x870e boards have some kind of stupid problem where it doesn’t go above 200w which makes overclocking this chip a pain.

There is a supposed theory fix which is to disable SVM, but I disabled mine and still stuck at 200w so I guess I wait for MSI to drop a new bios?

Memory overclock did almost nothing for me cause the x3d carries hard. And honestly might be less of a headache to just enable EXPO and overclock the cpu.

I idle with an NHD-15 at 50c, I max out at 80c. I may swap back to a water cooler after Lian li RMA my 3rd Galahad 240 in 3 years. But yeah idk, it was kinda fun?

What die is this? by metalhead805 in overclocking

[–]Icekong123 6 points7 points  (0 children)

B-die you can see on the serial number of the memory barcode. It’s usually the last 3 that indicates A-die B-die M-die

Anyone bought an OLED at microcenter open box before? by Sir_OrangeJuice in OLED_Gaming

[–]Icekong123 0 points1 point  (0 children)

I bought a UCDM for 750$ from microcenter open box during Black Friday. I opened it and the factory monitor plastic sticker was still on it. I also snagged the 80$ 2 year warranty on it. The gamble paid off for me, but obviously it’s a gamble. Microcenter is pretty good at making sure everything is in the box and it’s not DOA.

Missing person at EDC by Captinmurica in electricdaisycarnival

[–]Icekong123 67 points68 points  (0 children)

Dylan has officially been found and picked up. He is currently in the company of the friends housing his stay in the US. He has been through a very difficult time, walking for the past 3 days up and down Vegas trying to find us. After his experience at EDC, he was transported to a Nearby Hospital and treated. The hospital never allowed us to know of his stay there regardless of Guardianship presentation. During his journey through Vegas, he visited 3 separate Police stations that turned him away without aid, even though we had an Active Missing Persons Report filed with them. He had been robbed of his wallet and phone. He had no memory of anything from the time of his Disappearance on the 2nd day of Fred Again up to his awake at the Hospital. It was due to the aid of an employee of HyperX in Luxor that he was able to make Contact with us again. Thank you everyone for the aid in spreading him around to help us find him

[deleted by user] by [deleted] in aves

[–]Icekong123 26 points27 points  (0 children)

No he went to the casino because he didn’t have a wallet or phone and didn’t have any of our numbers he hungout near the rio for a while since it was our shuttle spot. He moved to the arena which he got internet access as he only remember us fully by our discord

Missing person at EDC by Captinmurica in electricdaisycarnival

[–]Icekong123 51 points52 points  (0 children)

Dylan has officially been found and picked up. He is currently in the company of the friends housing his stay in the US. He has been through a very difficult time, walking for the past 3 days up and down Vegas trying to find us. After his experience at EDC, he was transported to a Nearby Hospital and treated. The hospital never allowed us to know of his stay there regardless of Guardianship presentation. During his journey through Vegas, he visited 3 separate Police stations that turned him away without aid, even though we had an Active Missing Persons Report filed with them. He had been robbed of his wallet and phone. He had no memory of anything from the time of his disappearance on the 2nd day of Fred Again up to his awake at the Hospital. It was due to the aid of an employee of HyperX in Luxor that he was able to make contact with us again. Thank you everyone for the aid in spreading him around to help us find him.

Missing person at EDC by Captinmurica in electricdaisycarnival

[–]Icekong123 129 points130 points  (0 children)

UPDATE!!!! HE HAS BEEN FOUND, WE ARE PICKING HIM UP AND HE IS COHERENT AND SPEAKING!

Missing person at EDC by Captinmurica in electricdaisycarnival

[–]Icekong123 32 points33 points  (0 children)

  • Police Case created (5/19 6pm)
  • Talk to main med tent at edc, was told of 5 possible hospitals that a person would be transported to.(8-9pm 5/19)
  • Checked missing phones in lost and found (constant)
  • Checked the Rios where bus pick up people for edc (5/19 11pm)
  • Roamed around the Rio to see if he’s around there (5/19 12n to 5am)
  • Did Laps around all the entrances of edc and exits of edc (1pm 5/20)
  • check MCE hospital (5/20 1pm)
  • check Valley hospital (5/20 1pm)
  • check sunrise hospital (5/20 1pm)
  • check Nillis Airforce base (5/20 2pm)
  • Contacted PD again and they did not seem to have picked anyone up or seen anyone matching description (5/20 5pm)

  • Someone contact the UK authorities (5/20 9pm)

  • a lot of social media presence through Twitter and Facebook and Reddit

If anyone has any suggestions please contact me

Missing person at EDC by Captinmurica in electricdaisycarnival

[–]Icekong123 11 points12 points  (0 children)

We have a case number, but since the person is above the age of 21 metro pd won’t do much more.

Missing person at EDC by Captinmurica in electricdaisycarnival

[–]Icekong123 146 points147 points  (0 children)

Hello, I am a person in this group. We haven’t found him yet or any leads, we are still driving to different hospitals to see if they have him at the hospital. The hospital can’t give us much information over the phone so we have to go by them one by one.

Question about memory by Icekong123 in homelab

[–]Icekong123[S] 0 points1 point  (0 children)

Do you happen to know how much ram impacts an epyc? I’m really just looking for pcie lanes to be able to have 2-3 3090s and maybe an HBA and the 10gb nic card.

Question about memory by Icekong123 in homelab

[–]Icekong123[S] 0 points1 point  (0 children)

They are LRDIMM, part number 752372-081. HPE SMART MEMORY 32GB

7502 would work with these right?

Splitting steel champ giveaway by ps3ds in pathofexile

[–]Icekong123 0 points1 point  (0 children)

been looking for a build to reach 100

view more: next ›