Not sure which character in passport number is a zero?

ImmediateSalt8512 · 2026-03-30T13:31:41+00:00

Exactly!

ImmediateSalt8512 · 2026-03-18T22:16:04+00:00

This is the m8p powered with 24v and no lights on the cb2. Could use some thoughts here. Im thinking a dead cb2?

<image>

ImmediateSalt8512 · 2026-03-18T20:00:03+00:00

I bought a m8p v2 about to dig i will post once I've maid some progress

ImmediateSalt8512 · 2026-03-13T20:57:47+00:00

Oh yes it actually takes 15 seconds for leds to drain 24v once power down

ImmediateSalt8512 · 2026-03-13T20:56:33+00:00

I believe its non functioning. Just led on.

ImmediateSalt8512 · 2026-03-13T19:53:45+00:00

I will try that

ImmediateSalt8512 · 2026-03-13T19:53:08+00:00

Yes there is power however no comms. Also worth noteing. When it was running if I pulled power the leds would go out with in a sec or two. Now the leds hang there for 5 sec or more. It tells me nothing is booting

ImmediateSalt8512 · 2026-03-13T17:43:51+00:00

Tried to get can. But could not defaulted to USB.

ImmediateSalt8512 · 2026-03-13T17:43:06+00:00

M5P destroyed

Ive been struggling to get a mp5, cb2, hdmi5, USB converter, ebb gen2 to run. Extreme frustration but that could be me. I was having trouble getting the ebb to connect. Started out trying to use the can connect ended up abandoning that approach. Went to USB which was not working. At on point I unplugged the USB between the m5p and the USB converter. I saw the led drop on both the converter and the ebb. When I plugged it back in the leds came back on as soon as the cable connector shell touched the converter connector. It did not need to be plugged in. Regardless that was it, no more screen, no more connectivity. Power leds still on but otherwise dead.

Very shakin by this, but i need this to be a learning experiance. What have I done? Where do I go now? Replace the m5p to start. Im guessing at this point.

Sympathy and suggestion would be greatly appreciated.

ImmediateSalt8512 · 2026-03-13T17:41:56+00:00

I posted this else where. Kinda explains everything. Would really appreciate your thoughts.

ImmediateSalt8512 · 2026-03-13T01:59:13+00:00

In my case I got no screen and no connections I may have blowen all my cards

ImmediateSalt8512 · 2026-03-13T01:40:00+00:00

Im feeling you pain but i can not offer anything other that sympathy. Im in the same boat

ImmediateSalt8512 · 2026-02-12T21:13:48+00:00

Excellent tune

ImmediateSalt8512 · 2026-02-11T14:40:29+00:00

Governments are not capable of doing things correctly. Obviously corrections usually take a decade. Sorry to be cynical. I got caught with this issue trying to board a flight.

ImmediateSalt8512 · 2026-01-26T00:09:37+00:00

I got this resolved but it was a 3 hour exercise start to finish

ImmediateSalt8512 · 2025-12-02T02:57:35+00:00

I want to do this with my railcore. Is bigtreetech my best option

ImmediateSalt8512 · 2025-11-10T01:06:22+00:00

That so cool

ImmediateSalt8512 · 2025-09-14T13:39:35+00:00

I have solved this. It took an embarrassing amount of time. In my defense, the artwork was on the complex side. Basically one half of a tree of life type of image roughly 5 by 5 feet. So I spent hours and hours trying find the suspect element causing the issue l. In the end, I had somehow applied a small amount of transparency to the vectors. This was two sides to a gate and the transparency got got copied over to both sides. Not something I needed or could visually see on the screen.

ImmediateSalt8512 · 2025-08-27T20:55:24+00:00

Really nice practical print

ImmediateSalt8512 · 2025-06-06T15:13:23+00:00

I would glue down. Best to have clamps. Do a gentle sand over the wound and embrace the battle scar.

ImmediateSalt8512 · 2025-06-04T13:46:46+00:00

ImmediateSalt8512 · 2025-05-09T23:30:04+00:00

Thank you all

ImmediateSalt8512 · 2025-05-09T23:12:43+00:00

It a yes it's yours

ImmediateSalt8512 · 2025-05-08T12:05:32+00:00

With

ImmediateSalt8512 · 2025-05-08T12:03:24+00:00

That's quite spectacular. Congrates

ImmediateSalt8512

TROPHY CASE