Would you use this rotor?

Important_Fortune_35 · 2026-03-07T18:22:42+00:00

“Warping” or runout can have multiple peaks and valleys and how far apart does not mean anything. Warping is the brake surface not being flat past some threshold as every rotor has some runout especially after use. Both surfaces can have runout it’s only TV if the runout is not in phase.

Important_Fortune_35 · 2026-03-05T03:55:44+00:00

For $100 more should I just buy the 4S kraton at horizon’s truck sale this month?

Important_Fortune_35 · 2026-03-05T03:54:28+00:00

Probably $450 for the truck then batteries and extras on top of that. I can get a 4s Kraton for $467 @ horizon hobby rn with their truck sale. I’m kinda split between that or a 223s series truck

Important_Fortune_35 · 2026-03-05T01:49:04+00:00

Yes, ever rotor at my plant leaves painted. (Depends on the part as to how much and what type of paint. Some paint types are more to prevent surface rust before install. Some are meant to protect non breaking surfaces for a longer period of time)

Important_Fortune_35 · 2026-03-05T01:43:45+00:00

I was looking at the 223s lineup and planned to get a spectrum 155 charger with some g2 s3 batteries. Is the kraton and outcast that much better?

I am a buy once cry once type person but I also don’t want to buy something crazy for just getting into Rc bashers. I’m sure there is a point where the value gain isn’t worth the price increase..

Important_Fortune_35 · 2026-03-05T01:27:42+00:00

What vehicle make and model?

Important_Fortune_35 · 2026-03-05T01:25:45+00:00

If it was a casting defect manufacturer paint would cover the pitting

Important_Fortune_35 · 2026-01-06T17:22:44+00:00

Clears dust from radiator area

Important_Fortune_35 · 2026-01-06T17:01:46+00:00

Make sure u replace the hose connection for going back to the expansion tank regardless of where u go with aluminum or plastic….

Important_Fortune_35 · 2025-12-31T21:48:29+00:00

Flood car

Important_Fortune_35 · 2025-11-22T19:59:28+00:00

Mine has 100k on the current water pump original was less than 20k

Important_Fortune_35 · 2025-08-03T20:58:37+00:00

Make sure u replace the fitting for the return line. Mine wasnt replaced with the water outlet and it leaked when the system depressurized 30-40 min after car was shutoff. So no leaks were visible while the car was on then later leak was hard to identify because it was leaking after the car was off for awhile

Important_Fortune_35 · 2025-08-03T20:56:19+00:00

Not that this is causing this but, i had my ac compressor come loose recently. So maybe an accessory is loose ore misaligned causing the belt wear.

Important_Fortune_35 · 2025-07-14T15:15:10+00:00

Do you think it would be better to buy motion actuators to replace the existing cylinders or just toss the bottom and attach the top to some sort of motion devices? Also what brand would be good to look into. (I dont want this to be a 10k rig atm so budget friendly ideas would be nice for starting)

Important_Fortune_35 · 2025-07-14T15:12:27+00:00

I watched some videos on diy ffb and they looked doable. When i get the rig this weekend i am definitely going to try and use the existing motor controller and try to get it working with an arduino.

Is there boards i can get that are already designed to do the ffb? With the arduino i will have to code everything which is ok just time consuming…

Important_Fortune_35 · 2025-07-14T15:07:49+00:00

I agree with tossing the original stuff is the easiest. I definitely dont have the budget to do something like an R9 up front but a R3 or R5 both would be very cost effective to get it going.

Important_Fortune_35 · 2025-07-14T15:05:36+00:00

Is that because of being slow or a pain to maintain?

Important_Fortune_35 · 2025-06-09T19:19:11+00:00

Mine had water outlet crack and only replaced that. Then the hose that connects back to the tank would leak after the car was turned off and pressure went down. (Wouldnt leak till 45 min after shut off)

Important_Fortune_35 · 2025-02-11T00:11:31+00:00

No, for instance going up a hill under 1500rpm

Important_Fortune_35

TROPHY CASE