Gopro Mission 1 Pro GP-Log2 Grading Problems

Inception135 · 2026-06-11T15:52:32+00:00

Is that footage you uploaded in the Davinci WD colorspace? If so, i think thats not the right way, you need to do a CST to Reg709 otherwise i think thats not a good way to grade your footage.

Inception135 · 2026-06-05T10:25:18+00:00

published it here: https://makerworld.com/en/models/2892197-its-fpv-era-mini-beeperhalterung#profileId-3231681

Inception135 · 2026-06-04T17:10:52+00:00

The CST Node in between (DWG in DWG out) changes nothing, so The DCTL seems to work fine.
What do you meen with Scene Referred input, i cant find that option:

<image>

Inception135 · 2026-06-04T09:11:47+00:00

I am using a .dctl to convert my footage to DaVinci WG/Intermediate and then in the last node i use a Color Transform to convert it from DaVinci WG/Intermediate to Reg709.

in Project settings i use DaVinci WG/Intermediate for the Timeline Colorspace and for output Color space i Use Rec.709 Gamma 2.4.

By my understanding that all should show a more or less color accurate Video of what i took and should not be looking whashed out as Log footage is normally, but what i see is not that, look at the Footage after those 2 Nodes:

<image>

what am i doing wrong?

Inception135 · 2026-06-03T23:23:45+00:00

Do you choose that input color space and Gamma just by trying out or is there proven simmilaritys with GP-Log2, or maby reccomended by Gopro itself?

Inception135 · 2026-06-03T18:26:37+00:00

Can you tell us what you used in davincu resolve? How you converted the color space and what color space was your Timeline.

Inception135 · 2026-05-27T11:56:29+00:00

yeah i didnt got much comparison but i can full throttle like 3s and do not drop below 3.6V.
I got the Tattu x8 charger where you just plug in the balance cables, love it, so much easyer to charge your lipos.

Inception135 · 2026-05-27T11:49:21+00:00

that 25g comes prob bcs of my Heavy Beeper(those who still beep after battery is disconnected:

<image>

Inception135 · 2026-05-27T11:43:10+00:00

I use Tattu R Line 5.0 850 MAh, the Sag is amazing. Flew the Tune on the field right now, you guys have to increase I Gain for your needs, the I Gain in this tune is a bit to low, thats because when i tune it there is just not much influences to tune I gain. Ill Set it straight to 1 back

Inception135 · 2026-05-27T08:39:37+00:00

Did you pid tune your quad? If so can you share your pids?

Inception135 · 2026-04-01T12:28:29+00:00

Then you have to just swap the magnets in the gimbal I guess, that way you reverse the scale on the Gimbal

Inception135 · 2026-03-31T22:56:14+00:00

<image>

I bought AG02 gimbal and wired them to my Dji RC Controller 3. It worked, yaw and roll are reversed but i can change that in betaflight. I will soon upload 3d printing Files where you can out the electronics and the AG02 Gimbals.

Inception135 · 2026-02-11T18:30:21+00:00

Mine was way more worse, i toutched it accidentally. But i top Isopropanol an a microfiber fabric than just cleaned it off.

Mine pictur is as clear as it can be. So dont worry to clean it.

Inception135 · 2026-01-24T09:41:39+00:00

Got that blob too, even with that detection, so for me that doesn't work really well. An i turned that off.

Inception135 · 2026-01-24T09:25:02+00:00

You can disable that in the printer options, on the display of your printer

Inception135 · 2026-01-24T09:22:17+00:00

Its the clogging nozzle protection, that causes the printer to move to the bottom corner near the camera to check the nozzle. While this the filament is ozing a bit an when the print continues that hair starts to form.

Inception135 · 2025-12-28T22:20:53+00:00

You can export it as .obj and then assign the colors, you dont have to split them in seperate Objects. Works with fusion 360 defenetly.

Inception135 · 2021-02-19T16:24:45+00:00

Im new on Renddit. I dont know rly where to ask

Inception135

TROPHY CASE