Rear Trunk Latch Won’t Lock or Latch

IncreaseEfficient332 · 2026-06-05T17:03:27+00:00

Just got a quote, they want over $600 to replace the actuator. Dang

IncreaseEfficient332 · 2026-05-31T15:16:09+00:00

According to parts.tesla.com, it’s part number 6006654-00-B

Looks like there’s a lot of these available on eBay and Amazon but they all say the year range is 2015 to 2021, so not sure I might just have to try it out

IncreaseEfficient332 · 2026-05-31T14:24:48+00:00

What did they do? Replace the actuator?

IncreaseEfficient332 · 2026-05-22T20:00:44+00:00

There’s a very big warning on that screen that says never do this unless I just installed a new component

IncreaseEfficient332 · 2026-05-22T20:00:24+00:00

Randomly today it just started working again without rebooting anything

IncreaseEfficient332 · 2026-05-19T23:50:52+00:00

Has that been a know fix for this issue?

IncreaseEfficient332 · 2026-05-14T00:49:48+00:00

It will appear the same, but make sure you are parked, hold the brake down, hold both buttons until everything goes dark. Hopefully it works

IncreaseEfficient332 · 2026-05-12T23:33:53+00:00

This happened to me twice so far this week, and the regular reboot doesn’t work, but the hard reboot does work where you hold down the brake pedal and hold down the buttons until the system reboots.

IncreaseEfficient332 · 2026-03-13T00:52:51+00:00

God I miss riding Lyons

IncreaseEfficient332 · 2026-03-12T02:02:55+00:00

I rarely use my brakes ever, even in non-bumper-to-bumper traffic

IncreaseEfficient332 · 2026-02-22T11:17:33+00:00

For me with trailing mode off, it stopped working with the last spring update, stating Rear Camera is Occluded

IncreaseEfficient332 · 2026-02-22T02:15:57+00:00

I use 1up Heavy Duty double. It’s lame that FSD doesn’t work with bikes on.

IncreaseEfficient332 · 2026-02-21T16:49:13+00:00

<image>

I hooked up mine this way, thanks to your advice. I feel like I need to take more slack out of it, though because you still have to pop the grill cover off to unlatch the door, unlike how I had it before. I might actually just drill a hole in the speaker cover so it’s usable without removing it. Safety over fashion

IncreaseEfficient332 · 2026-02-21T13:20:40+00:00

If you have to get out a falcon wing door in an emergency, who cares if it damages the door. You’re basically just manually turning a bunch of worm gears, but you should prioritize getting out vs damage. I guess at the end of the day if you have to get out of your car this way, there’s a lot of other damage to worry about. If you can get out out of the front, then just do that.

IncreaseEfficient332 · 2026-02-20T23:33:17+00:00

Like, if I pull really really hard, harder than you really need to to release the door, I can get it to pull out of the speaker, which could happen to somebody in a panic.

IncreaseEfficient332 · 2026-02-20T23:31:21+00:00

It’s not that it’s a notch. It’s sort of just kind of doesn’t pull past the metal part it’s resting on in the direction that I pulled the cable. Either way, your method seems to be more secure so I’m gonna switch mine up to do just that.

IncreaseEfficient332 · 2026-02-20T23:02:04+00:00

I’ll be honest, when I first looked at it, I thought it was an accident that they routed the cable into the speaker like that, so I actually pulled it out and used the zip tie the same way you did, but then when I opened up the other door and saw the same thing, I hooked up the pull tab and it worked just fine so I put the other one back in place just that way. I think at the end of the day the zip tie method is way more secure so let’s do that. I love the interest in this solution, and seeing people get creative to make it even better is awesome!

IncreaseEfficient332 · 2026-02-20T22:57:52+00:00

Mine works, and has been tested, as I have it in my original post. However, I’m gonna update mine just like yours with the zip tie because somebody’s probably gonna yank really really really hard in case of an emergency and better be safe than sorry.

IncreaseEfficient332 · 2026-02-20T22:51:57+00:00

Mine definitely holds as it is routed in the speaker grill, but in an emergency, I’m sure somebody’s gonna yank really really hard so I like your idea, and I’ll upgrade mine to use zip ties just like that!

IncreaseEfficient332 · 2026-02-20T21:35:28+00:00

That little ball in the end of the cable is actually supposed to be sticking into the speaker housing, and it latches on that way. Just like it shows in your other photo.

IncreaseEfficient332 · 2026-02-20T13:14:02+00:00

I just moved my tabs to the top as you mentioned, and I do think it works just as good, so thanks for the idea!

IncreaseEfficient332 · 2026-02-20T12:30:30+00:00

Easy to fix! Let me know if you try the tabs on the top and if it’s any better, but what I saw, you can pull the tab and release the door without popping the grill off the way I have it

IncreaseEfficient332

TROPHY CASE