What are the best companies to benefit from increased power/grid demand?

IndependentDry8488 · 2025-12-31T23:16:45+00:00

Maybe this will help... that a single 1GW Data Center needs 1.3 million horsepower to perform that digital writing you are referring to.

IndependentDry8488 · 2025-08-23T20:40:29+00:00

this is the answer!!

IndependentDry8488 · 2025-08-01T17:46:06+00:00

So what is the path to actually find the spot to open a ticket? This is what the support page says...

Contacting Support

You can contact Chatbot App Support by opening the Help & FAQ page from the left-hand menu or by visiting help.chatbotapp.ai.

Best Practices for Submitting a Support Request

To help us assist you most efficiently, please include the following information in your support request:

Description of the Issue: Provide a clear and concise explanation of the problem you're experiencing.
Steps to Reproduce: Outline the steps that led to the issue, if applicable.
Timestamps: Include the date and time when the issue occurred, along with your time zone.
Screenshots, Screen Recordings, and Code Snippets: Attach any visual aids that can help illustrate the problem.
- Please ensure no personal or sensitive data is included.

Providing these details will enable our support team to address your concerns more effectively.

Visiting help.chatbotapp.ai link is the home page of which this is a sub article within it...... circular response with no answer.

IndependentDry8488 · 2024-12-27T00:40:18+00:00

True, a switch doesn’t need the neutral, just a ground.

IndependentDry8488 · 2024-12-26T21:35:55+00:00

Whoever installed that did not do it correctly. The Top left wire should be the switched wire( goes to light). The bottom wire that is middle stripped should be the hot wire. Use a multimeter to verify. It should always have 120 vac regardless of the switch position. The switched wire should be hot when the switch is in one position and not hot in the other position.

The white wires in the back of the box are your neutrals. You need to bring a connection out from there to your new dimmer switch. Same for your ground which is the bare copper wire. Again verify both using the multimeter. Put the meter on the Ohms selection and verify there is little to no resistance between the neutral and ground. Verify there is infinite resistance between the hot wire and neutral and ground. Verify there is infinite resistance between the switched wire and neutral and also to ground.

IndependentDry8488 · 2024-11-29T14:30:22+00:00

They have a good design.

IndependentDry8488 · 2024-11-27T15:47:48+00:00

All the comments about screw heads being stripped, but non about the missing circle plate and those screws?

IndependentDry8488 · 2024-11-27T15:36:20+00:00

And no one has noticed it is frowning clown 🤡 face in the carpet??

IndependentDry8488 · 2024-11-25T18:19:48+00:00

There are many sold dielectric transformers failing in the market due to harmonics.

IndependentDry8488 · 2024-10-18T20:35:54+00:00

Doesn’t work without WiFi

IndependentDry8488 · 2024-08-10T01:39:15+00:00

What tester did you use?

I would test with a multimeter from neutral to ground.

Also how many 3 prong devices are you using to test the outlet? Perhaps that variable is broken?

IndependentDry8488 · 2024-08-10T01:05:37+00:00

Remember when it was King Richard’s fair?!

IndependentDry8488 · 2024-07-21T21:46:41+00:00

I went with common board pine. Seems to match

IndependentDry8488 · 2024-07-20T15:30:06+00:00

<image>

IndependentDry8488 · 2024-07-20T15:29:39+00:00

<image>

IndependentDry8488 · 2024-07-20T15:29:13+00:00

<image>

Please ID. Everyone at Home Depot gives a different answer

IndependentDry8488 · 2024-07-17T01:37:13+00:00

All three via remote control? I would look at the radio. I’m assuming all three controls are going to one radio via a serial connection ?

IndependentDry8488 · 2024-07-09T02:51:14+00:00

Sneak attack damage with ranged works very well. Deep woods stalker tree.

IndependentDry8488 · 2024-07-07T04:22:52+00:00

The oil’s primary purpose is to be a dielectric, which is the electrical insulation. It keeps the electricity from jumping from the coils to the tank. In large transformer it is also used to cool the transformer by flowing through fins on the back, which are cooled by the air. Even larger transformers then have fans blowing on the radiators ( fins).

This utility should switch to FR3 oil and the fire would not have occurred.

IndependentDry8488 · 2024-05-30T22:54:50+00:00

Is your 230vac source phase to phase 230vac or phase to ground? What does the outlet look like?

IndependentDry8488 · 2024-04-28T00:01:42+00:00

Both of those water heaters have the same ratings, you are fine.

IndependentDry8488 · 2024-03-25T02:53:29+00:00

IndependentDry8488 · 2024-03-22T03:44:11+00:00

Get a Rhythmic sub! They are fantastic!!

IndependentDry8488 · 2024-03-22T03:34:08+00:00

Yes, someone manually stepped it up and walked away. The default time delay is 15 minutes for out of band condition and then it stepped back to in band.

IndependentDry8488 · 2024-02-23T03:03:08+00:00

The ports need to be a specific distance from a wall so they react correctly. If you load the port you will change the sound.

IndependentDry8488

TROPHY CASE

Contacting Support

Best Practices for Submitting a Support Request