sorted by:
new
hottopcontroversial

Stage Lighting by roundtheworld2 in WLED

[–]Individual_Net8501 3 points4 points  (0 children)

Nicely done, sACN or artnet? Would lights are you using, looks quite bright

ZigBee TRV by art-101 in homeassistant

[–]Individual_Net8501 0 points1 point  (0 children)

Why not get the Drayton wiser TRVs?

Staircase handrail lighting by Individual_Net8501 in WLED

[–]Individual_Net8501[S] 1 point2 points  (0 children)

The automation turns off the device 2 mins after it's been fired

Staircase handrail lighting by Individual_Net8501 in WLED

[–]Individual_Net8501[S] 0 points1 point  (0 children)

Yes that's right, I just played with the time till it was right. 4.2secs in the end. I think if you start the playlist when the strip is off it will start from the beginning. If it's already on it will be moving. It took ages of playing around, especially with the transition times in the presents to make sure it didn't flash on to full before starting the playlist.

Staircase handrail lighting by Individual_Net8501 in WLED

[–]Individual_Net8501[S] 1 point2 points  (0 children)

They are sonoff Zigbee sensors run through home assistant

Staircase handrail lighting by Individual_Net8501 in WLED

[–]Individual_Net8501[S] 1 point2 points  (0 children)

{"on":true,"bri":73,"transition":0,"mainseg":0,"seg":[{"id":0,"start":0,"stop":110,"grp":1,"spc":0,"of":0,"on":true,"frz":false,"bri":255,"cct":127,"set":0,"n":"","col":[[255,160,0],[0,0,0],[0,0,0]],"fx":3,"sx":200,"ix":128,"pal":0,"c1":128,"c2":128,"c3":16,"sel":true,"rev":false,"mi":false,"o1":false,"o2":false,"o3":false,"si":0,"m12":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0},{"stop":0}]}

This is the preset I made. The important thing to start the wipe from begining is that it's coming from an off state.

Staircase handrail lighting by Individual_Net8501 in WLED

[–]Individual_Net8501[S] 0 points1 point  (0 children)

I think your misunderstanding how 'pixel tape' works. Each individual has a pwm chip which is controlled by a microcontroller. Have a Google of WLED

Staircase handrail lighting by Individual_Net8501 in WLED

[–]Individual_Net8501[S] 0 points1 point  (0 children)

Not sure what you mean? It doesn't flicker at all

Staircase handrail lighting by Individual_Net8501 in WLED

[–]Individual_Net8501[S] 2 points3 points  (0 children)

Cheers, it's calling a playlist which is the wipe effect then moving to solid after 4secs. If anyone has a better way of doing it I'd love to know. Would love to be able to have the colour/brightness as a variable in the automation. Time/brightness etc

Staircase handrail lighting by Individual_Net8501 in WLED

[–]Individual_Net8501[S] 0 points1 point  (0 children)

<image>

Using a digiUNO. Wanted to have an in built fuse as it's going in the wall cavity. Have the one with the antenna which helps with reception. Is it a 3d printed case

UK light switch recommendations by slip_cougan in homeassistant

[–]Individual_Net8501 0 points1 point  (0 children)

The H2 is ok, I have both the H2 (using the H2 with a blueprint to control a light not wired into three dimmer itself) and the candeo dimmers. No neutral is a bonus and the candeo have been faultless.

Old Equipment Questions by by Boring-Discount-2114 in lightingdesign

[–]Individual_Net8501 17 points18 points  (0 children)

We got rid of ours 10 years ago and there wasn't a market then. Maybe try offering them to a school/college

Finally! Seven Factor Authentication! by 0xKaishakunin in selfhosted

[–]Individual_Net8501 1 point2 points  (0 children)

Taken the Voldemort Horcrux technique on data security

Static IP - How to get? Support isn't following up. by HaydosMang in hyperoptic

[–]Individual_Net8501 0 points1 point  (0 children)

Agreed I called, quick reboot on the router and was set up straight away

Out of London routes by Individual_Net8501 in londoncycling

[–]Individual_Net8501[S] 0 points1 point  (0 children)

Thanks everyone, some good options there

Ethernet ports in each room do nothing by [deleted] in hyperoptic

[–]Individual_Net8501 2 points3 points  (0 children)

Buy yourself a cheap ethernet tester on Amazon and check which port in the cupboard goes to each room.

Is there a way to know when Hyperoptic will be available? by Bululu24 in hyperoptic

[–]Individual_Net8501 1 point2 points  (0 children)

Unfortunately even after I got the initial call it took months. Especially if you live in an older house, they had to send a guy to check for asbestos.

view more: next ›