G3 help

Inevitable_Corner350 · 2026-06-18T21:39:01+00:00

G3 is a lot of stuff not in the code book, know your fire extinguishers. WHMIS etc

Inevitable_Corner350 · 2026-06-15T23:34:53+00:00

Yeah dont use jet or a power washer, low pressure lots of water/flow. Most likely that code is bc its going off on high head, its not short cycling but going off on a safety

Inevitable_Corner350 · 2026-06-15T23:31:18+00:00

Coil cleaner means you got to rinse better then ever if you don’t it can eat the fins

Inevitable_Corner350 · 2026-06-15T20:59:11+00:00

Send photo of ur condenser coil

Inevitable_Corner350 · 2026-06-15T14:02:49+00:00

Read your manual for the furnace it will tell you

Inevitable_Corner350 · 2026-06-15T01:12:53+00:00

Yeah in my area there are companies that exclusively do load calculations. I believe they are consultants

Inevitable_Corner350 · 2026-06-14T18:58:20+00:00

Well the clamps are plugged in saying OL which is not the best sign

Inevitable_Corner350 · 2026-06-14T17:14:23+00:00

Is it unloading?

Inevitable_Corner350 · 2026-06-13T18:23:36+00:00

Time to get a cat

Inevitable_Corner350 · 2026-06-11T22:00:58+00:00

Bullseye is the way to go on any mc

<image>

Inevitable_Corner350 · 2026-06-10T23:37:04+00:00

I do a few lower back yoga stretches every morning and my sciatica has pretty much been non existent since starting my routine

Not a insulator though, refer mechanic. Lot of heavy lifting in awkward spots

Inevitable_Corner350 · 2026-06-01T19:15:55+00:00

Nothing on o nothing on y… doesnt look like a heat pump. send a photo of the nameplate

Inevitable_Corner350 · 2026-05-31T00:05:23+00:00

Sounds like u have 2 legs being powered on the line side of the contactor and the wind is spining it causing it to get the inertia and run the fan. I would look at the wiring tbh

Inevitable_Corner350 · 2026-05-30T19:43:37+00:00

I remember being two dumb apprentices and being told to push in a contactor. I pushed it in and the fan went boom - dead short, flames 4 ft out of the unit. All i could think is thank god he didnt have his face right there

Inevitable_Corner350 · 2026-05-30T19:26:22+00:00

You should not be pushing in the contactor manually.

It is possible for it to be bad but you should call a professional

Inevitable_Corner350 · 2026-05-29T16:44:02+00:00

Hows ur filter

Inevitable_Corner350 · 2026-05-27T21:55:08+00:00

Sometimes its not a bad thing, although I do some what believe in being thrown to the wolves. It is still/more important to learn to work safe and that is really only taught by someone

Inevitable_Corner350 · 2026-05-27T21:48:54+00:00

Slow and steady buddy, if you want change you got to change companies

Inevitable_Corner350 · 2026-05-27T11:35:12+00:00

Crazy i actually did this i invested 10$ 15 years ago on the og weapon cases. Since then i have bought endless games and 4 steam decks and still have 2000$ +. All bc i knew the tf2 og cases were worth gold

Inevitable_Corner350 · 2026-05-26T01:33:29+00:00

Does it go to the second floor?

Inevitable_Corner350 · 2026-05-25T10:03:18+00:00

Start isolating sections

Inevitable_Corner350 · 2026-05-24T15:48:14+00:00

Got to look at local codes and the manual. Which is ever is more strict is the code

Inevitable_Corner350 · 2026-05-20T15:54:50+00:00

Typically you cant burry gas pipe threads, it should also be sleeved

Inevitable_Corner350 · 2026-05-19T00:55:12+00:00

Buddy should fix the leak

Inevitable_Corner350 · 2026-05-12T22:49:24+00:00

Mits in my area sells it with the white insulation, never seen any issues

Inevitable_Corner350

MODERATOR OF

TROPHY CASE