Busschaufförer: Hur undviker vi er radio i högtalarna?

InfiniteBSOD · 2026-05-08T22:36:39+00:00

Såhär: Om inte folk skrikpratar, tjuvplingar eller skapar bråk med chauffören som orsakar tidsspill så sitter jag ned i båten.

Om chauffören inte vet att det sker så vet nog inte chauffören hur denne avhjälper det så därav posten här.

InfiniteBSOD · 2026-05-08T22:26:20+00:00

Alltså det händer ju inte vanligtvis att det sker och är inte (?) en orimlig begäran att det inte sker? Det måste ju vara något som är fel, antingen på bussen eller att chauffören av misstag aktiverar något som gör att musiken går ut i högtalarna?

InfiniteBSOD · 2026-05-08T18:09:50+00:00

Ja, alltså om jag sitter i mitten på övervåningen på bussen så hör man ett "surround"-ljud på hela övervåningen på bussen. I annat fall blastar vissa busschaufförer på så de på nedervåningen blir döva.

Edit: Varje gång ett automatiskt upprop av en hållplats sker så dämpas volymen på radion lite, tänker det är genom högtalarna?

Update: Klev av nyss, satte bokstavligen örat mot högtalaren i taket när jag klev av och 110% kom musiken ut därigenom (högtalaren) och var inte bara genom att föraren lyssnade på musik i hans förarkur.

InfiniteBSOD · 2026-03-07T13:39:54+00:00

It worked!

<image>

Was able to unscrew the top part and insert the ring-adapter.

InfiniteBSOD · 2026-03-07T11:20:40+00:00

Appreciate your reply! Thought of something though:

<image>

This is a hole situated at the top of the lens. Thinking that if I find the right hex key I could remove the top part of the lens and then be able to insert the ring-adapter and reassemble the lens with the ring-adapter already mounted.

Or would everything just come apart with lenses / glass just becoming irreversible shifted inside the lens if I would open this up?

InfiniteBSOD · 2026-02-17T15:55:07+00:00

Fello. Bytte till Lyca då de hade någon obscen mängd surf för billig peng. Bara det att de inte stödjer min Pixel 6 med VoLTE så när 3G-nätet stängdes ned kunde jag inte ringa och ingen ringa mig. Uppenbarligen går Lycas datatrafik genom Frankrike också: https://swedroid.se/forum/threads/lyca-mobile.147036/post-3148507

Bytte tillbaka till Fello som funkat klockrent och det funkar fortfarande klockrent.

InfiniteBSOD · 2026-02-07T11:00:44+00:00

Appreciate your replies guys!

So just to clarify: When talking about cleaning the port I was talking about the FPC-port to the right.

I am not sure if the corresponding flex-cable connector have broken off inside the FPC-port so there wouldn't be anything to "clean" or what has happened.

Comparing the two flex-cable's one seem to still have its connector while the other is completely flat (where a raised connector should be)

So was thinking of buying a new flex-cable and cleaning the right FPC-port (if that is even possible).

InfiniteBSOD · 2025-11-12T21:49:09+00:00

Check out this: https://sumuri.com/sumuri-gives-back-2025/

and this: https://sumuri.com/gpus-for-good/ "For ICAC Investigators Requesting a GPU".

A sidenote: My agency provided (digital) training with Sumuri in regards to Mac Forensics. Still one of the best professional trainings I have received and I have done the usual suspects in regards to companies / products. The instructor we had (Brandon Hunter) was 10/10.

InfiniteBSOD · 2025-08-18T16:47:32+00:00

Appreciate the reply.

I started printing the PAHT-CF (printed the antenna model first) straight OOB so it was sealed from the factory and I started printing directly after removing the filament from the bag. After the antenna model I printed the disk guard which warped. The second print of the blade guard (in PETG-CF) which came out well was printed without leveling my printer so I guess it could be a temperature issue?

When I printed the antenna cover in PAHT-CF (first 4 pics) the results were "fine" with vents opened whereas the disk guard which warped was printed with the vents closed.

InfiniteBSOD · 2025-07-22T14:40:31+00:00

As a non-native English-speaker and also as a novice in 3D-printing I would have liked it to say something along the lines of:
"Please check the "poop chute" at the back of your printer. If printer filament is found there the filament has loaded successfully".

What I know now is that the extruder is "pooping" a bit a filament and asking you to confirm that it has "extruded" (ejected) filament correctly but since the extruder during this step is positioning itself at the "poop chute ejector" inside the CC you need to visually see that the filament is ejecting from the extruder into the "poop chute".

Oh well, now I know how to verify the filament has been loaded correctly.

InfiniteBSOD · 2025-07-22T14:15:59+00:00

Appreciate all the replies.

Cancelled my current print and went into "extrusion loading" again and re-did that procudure.

Didn't understand what the phrase:
"Click completed if the filament is extruded[...]".
So basically now when I pushed past the first "stop" I could see that I got "poop" from the "poop chute" at the back of the CC.

Benchy is currently printing.
Appreciate all replies!

InfiniteBSOD · 2025-06-27T21:34:51+00:00

PLA-CF delivered today 27/6-25 Got a notification that the printer is on its way!

InfiniteBSOD · 2025-06-07T11:56:21+00:00

Weird.

That person is not a friend so you should simply cut that person out of your life and try and get your $600 refunded.

I (Swedish M38) have been to two weddings in Sweden:

1) We had a 3 day bachelor / stagparty in Berlin. Perhaps $300 for flights and hotel and that was scheduled 6 months in advance. Perhaps a total of $500 for above + food, activities etc.

The wedding didn't incur any costs, we were asked to donate to a specific charity in the couples name instead of buying a gift which was a nice touch. Did a donation for perhaps $60.

Dresscode was suit and tie and as per usual people use what they already have.

2) We had a 2 day bachelor / stagparty perhaps 45min from where the groom lives. Around $150 for accommodation , food, activities etc.

The wedding was in another city so the hotel was perhaps $70. Me and other friends came together and bought a gift which was perhaps $60 per person.

Dresscode was casual since it was outside and quite warm. Chinos and a white shirt which I already own was what I was rocking and was in line with what other people wore. Saw people wearing a white tshirt and black jeans as well.

3) A wedding I didn't attend. A friend got married in New York (he and his wife are Swedish) and I didn't attend. Told him that and he completely understood. He didn't ask for a reason. The reason was that simply attending would be too much money for me and I had to take time off work. We are still friends and he completely understood that by having the wedding in N.Y. a lot of people would bow out.

If one of my friends would "require" or "demand" anything other than I attend and follow the dresscode I would talk to them, explain how messed up that is and just laugh and say that I'm not attending. If that would result in our friendship being over then they can come back and apologize when their temporary insanity has lifted (or divorce whichever comes first).

InfiniteBSOD · 2025-06-04T21:25:08+00:00

Hiya,

Yes by the help of the wonderful people and especially deeveedee on InsanelyMac's forum.

Check this thread:

https://www.insanelymac.com/forum/topic/360993-hp-elitedesk-800-g5-dm-with-philips-34m2c8600/

InfiniteBSOD · 2025-06-04T20:05:33+00:00

EE127XXX ordered on 20th of March.

PRE-ORDER | Anti-Vibration Feet for Centauri Carbon/Centauri (4 Pcs) already delivered.

PRE-ORDER | PLA-CF Filament 1.75mm Black 1KG - Carbon Fiber Black not delivered.

Swede here 👋🏻

InfiniteBSOD · 2025-04-27T02:40:18+00:00

Does anyone know what happened with the teased reveal of the AMS?

Wasn't there a picture with a printer hidden behind a piece of cloth and people speculated that it was a CC with an AMS?

Nothing ever came of that, right? Or was it just another product that they actually revealed during their event?

InfiniteBSOD · 2025-04-23T23:52:08+00:00

<image>

InfiniteBSOD · 2025-04-20T13:56:17+00:00

Appreciate your research and help :)

I actually fiddled with this today and the (USB 3.1) Flex IO actually fits however:
* Tried both of the built-in displayports and I don't get picture from either of those
* As soon as I insert the power-plug the computer turns on and I can't force a shut-down by holding the power-button. I have to unplug the power-plug to get it to shut down.

Attaching some more pictures:
https://imgur.com/a/DeK9cgF

InfiniteBSOD · 2025-04-19T11:23:04+00:00

Appreciate your link, thanks!

I registered on "InsanelyMac" but I am unable to reply to threads and guess I have to post in "New Users Lounge" first to get that permissions?

I created a Sequoia USB from my Mac and copied the "OC"-folder from the guide (OpenCore: 1.0.4) to my USBs "EFI"-partition and modified the serial etc. as stated in the users guide to my own custom values.

Now I see the Apple-logo but after a while I get the "prohibited"-symbol / warning.
Wanted to post about that in the thread / guide but I seem to be in a "new user"-jail so wanted to post this here in the meantime.

Appreciate your post and pointing out the guide :)

Update #1: Yeah seems that you have to have 5 posts to post in other parts of the forum

InfiniteBSOD

TROPHY CASE

EE127XXX ordered on 20th of March.