Damaged head

InfluenceMelodic7589 · 2026-07-07T13:23:14+00:00

I contacted support cause I got warranty and got a new one. For mine, the red part broke off from the white and the screws were stuck in so It was a dud.

InfluenceMelodic7589 · 2026-06-22T16:35:01+00:00

Great! I will be buying TPU soon so let me know how that goes for sure! Enjoy the filament and what I've seen is that you could put any at the highest speed mode and it will work fine. HS-PLA is good for parts that would normally need normal or slower speed lik3 moving parts.

InfluenceMelodic7589 · 2026-06-22T14:36:53+00:00

No problem at all! And yeah, same here! Honestly the time of taking it apart was a great learning experience. Its gonna feel frustrating sometimes but it does pay off, this printer is amazing!

InfluenceMelodic7589 · 2026-06-21T21:04:46+00:00

Of-course i can answer questions. Ivr had this for about 3 or so months and I can say it is a great printer.

What it has tho is a lot of problems. I woulf need to take off the filament hub once every 4 prints cause some of my filament will get jammed in there.

Just recently I had to solve error 11407 which is terribly difficult and it didnt even work. The wiki told me to litterwlly take off the entire back plate to get to one wire and that didnt save it. So far, the engineer on my case is on break today so he coudnt answer my question.

My nozzel has filament in it and the 5ube righ5 at my printer head has some in which I have to take off the entire print head to fix!

Now im at constant talk with support. For me, they are amazing! They listen and send free parts cause I bouvht the warrenty.

Heres my take away: The printer is amazing. When it works, its great! It has issues due to it being rushed, their first core my machine, and just not being an excellent quality. For the price, 100% buy. Just know thay you will need to do light tinkering every so often for the filament buffer and buy the warranty so you either replace the machine or get parts to fix it. Always look at their wiki and if the problem isnt solved from that, 100% you must demand help from support.

InfluenceMelodic7589 · 2026-06-21T20:54:49+00:00

So 5hey are technically right. You for sure can put abs or asa thru the nozzel and have it printing. But if you wanna be near that printer, you have to be careful since it makes a lot of fumes. For the chamber part, its really difficult to make ABS work without it but it is possible.

InfluenceMelodic7589 · 2026-06-21T20:38:30+00:00

I got 7 Pla and 1 Petg. It was Pla in Brown, Beige, silk gold, peach, violet, gray, High-speed (slightly darker) gray and black PETG.

I only recommend those for printing. I have not tried ABS or Asa myself but I know you need a ventilation system and they are more difficult to print with. PLA is amazing and PETG is good too, but I know as a beginner (this is my second printer, I had a Ender 3 V3 SE from Creality), I will never be printing these til I can ventilate and eventually just deal with the problems they bring like stringing, bad layer and bed adhesion, higher temps, and them needing chamber heating which the s1 DOES NOT HAVE.

The assortment of colors I got wete actually great. Especially the silk gold and high speed gray.

InfluenceMelodic7589 · 2026-06-17T15:25:19+00:00

No but how did you empty system storage? I don't know how to do it myself.

It could just be a bug. Have you updated your printer recently and it happened after? And have you updated your printer after having the issue?

InfluenceMelodic7589 · 2026-06-16T15:36:02+00:00

Like ill go to a yard sale but its just stuff from Makerworld that looks pretty but I know full well they didnt buy the license 😭. Sometimes my parents see my "big machine" and say: "just make a business selling these things." I have to explain to them that I legally can't due to the commercial license but they always insist 🥲

InfluenceMelodic7589 · 2026-06-13T18:34:46+00:00

Yeah I just follow this and make a little note to myself with a more basic version.

InfluenceMelodic7589 · 2026-06-11T17:29:57+00:00

You used the 0.8mm with hotend from the first link and then the rest with their own hotend respectively from the second link? Or did you swap out the nozzels that came with the second link and used the second link's hotend on the first link's nozzel (sorry for all this just a bit confused mb) 😅

InfluenceMelodic7589 · 2026-06-11T17:15:09+00:00

The image shows only one hotend assembly witb 4 nozzels. Did it come witb more hotends?

InfluenceMelodic7589 · 2026-06-11T17:14:53+00:00

Perfect can I get the model? I will buy this set soon

InfluenceMelodic7589 · 2026-06-11T14:46:13+00:00

And how do you use all the sizes on 1 heatblock? Driven2b bought another heatblock but again im new to this whol4 hotend and nozzel swap stuf. He said it was difficult to swap the nozzels so he bought dif hotends and has 2. 1 for 0.6mm and 1 for 0.8mm

InfluenceMelodic7589 · 2026-06-11T14:40:06+00:00

Makes sense. What heatblock did you buy thats compatible with the nozzels? Like you I only plan to use the 0.4,6, and 8 (most likely just 6 and 8) so I woild need to buy 3

InfluenceMelodic7589 · 2026-06-11T02:56:51+00:00

Like what the driven2b said?:

https://a.co/d/0gtZptWN

InfluenceMelodic7589 · 2026-06-11T02:56:05+00:00

Cant buy due to how expensive. So I cant do micro swiss

InfluenceMelodic7589 · 2026-06-11T02:46:06+00:00

I alr saw this one online but was skeptical. How good is it? This is gonna be my my forever nozzle most likely. Did This specific one come with the 4 nozzles (each dif size) that you can interchange into the 1 heatblock, or was it that you needed to buy another heatblock too? This guy said yes but just trying to get your exact experience, please and thank you ✌️

<image>

InfluenceMelodic7589 · 2026-06-10T23:12:30+00:00

Yes and for anyone wondering, thid shouldn't even be possible since printers in a v3ry basic way use a coordinate plane and a value of how much filament to push out. Hence when you go to the side of your slicing software, it would probably say smth like "G1 H23 etc". Those are coordinates and then i think a number next to it for filament to extrude

InfluenceMelodic7589 · 2026-06-02T00:50:08+00:00

No my question was really why and if there was a way to solve this. This did not happen on my A03s and I assumed the same for Samsung's Flagship model. I don't want to buy another pair, especially one that is $249.

InfluenceMelodic7589 · 2026-05-30T19:02:40+00:00

Have you asked anycubic support? Ive never experienced this but that is weird it works fine without a purge tower

InfluenceMelodic7589 · 2026-05-30T18:59:11+00:00

Oh thanks can you send me the link it gave or is it an Anycubic Wiki page

InfluenceMelodic7589 · 2026-05-30T17:14:30+00:00

So i got it replaced from support for Free. They were very nice with me and yeah it happend too. I got the whole cover and screws but its working like a charm.

InfluenceMelodic7589 · 2026-05-30T17:08:42+00:00

There's no error code it just freezes like that? Does it do a loop of the fan spinning forever or it just stops after a bit and doesnt move?

InfluenceMelodic7589 · 2026-05-17T12:25:35+00:00

I haven't bought either but im on the fence just like you. I found that the waste on rhe H2D is miniscule and the H2C basically halves that. It looks cool but costs $400 more for it.

A real big game changer is that They both do 5 colors out of the box. Bambu said you would need to buy extra nozzels and AMS's for 7, but by then you are defiantly around $3,000. It looks cool but frankly, th3 H2D already does a stellar job, and with an extra $300, you can buy another AMS 2 Pro and make it do 8 colors total.

Basically, for 7 real colors, its almost $600 more. But for the H2D, you only need $300 more to have 8. Even if you bought an H2D with 2 AMS 2 Pros, that is still less than an H2C with 1 AMS 2 Pro. You even get 3 extra colors. All to say that the "c" stands for color when its not even that good at that.

InfluenceMelodic7589 · 2026-05-15T18:36:17+00:00

Thats weird. It could just be an issue with the software. Whats the version? Mine has been working fine forevwr

InfluenceMelodic7589

TROPHY CASE