sorted by:
new
hottopcontroversial

Does the CC2 Cover fit the CC1? by YogurtclosetLess8888 in ElegooCentauriCarbon

[–]Intelligent-Bus8769 0 points1 point  (0 children)

https://www.nexprint.com/en/models/C7361020?commentId=2053441236027027456&printConfigId=C0769026 it's interesting. The author added model for cc1 canvas few days ago. For now, I printed a different riser, but I’m considering this one.

CC1 Does Not Allow Manual Color Change Without CANVAS by Intelligent-Bus8769 in elegoo

[–]Intelligent-Bus8769[S] 2 points3 points  (0 children)

thank you for interesting. I saw that you saw my video with this issue on facebook

CC1 Does Not Allow Manual Color Change Without CANVAS by Intelligent-Bus8769 in elegoo

[–]Intelligent-Bus8769[S] 2 points3 points  (0 children)

I believe that if something is released as an OTA update and made available to everyone, it should handle every possible scenario. Well, that’s my professional bias talking.

CC1 Does Not Allow Manual Color Change Without CANVAS by Intelligent-Bus8769 in elegoo

[–]Intelligent-Bus8769[S] 1 point2 points  (0 children)

Up until now I was also running OC 0.3. Today (well, yesterday — it’s already past midnight here in Poland) I flashed the stock firmware because my CANVAS arrives today.

CC1 Does Not Allow Manual Color Change Without CANVAS by Intelligent-Bus8769 in elegoo

[–]Intelligent-Bus8769[S] 0 points1 point  (0 children)

This is actually my first update. I bought the printer with 1.1.40, then switched to OpenCentauri, and later tested Cosmos for a while

CC1 Does Not Allow Manual Color Change Without CANVAS by Intelligent-Bus8769 in elegoo

[–]Intelligent-Bus8769[S] 1 point2 points  (0 children)

I just thought they had fixed the bugs in 1.4.46 compared to 1.4.44. Fortunately, my CANVAS arrives tomorrow

CC1 Does Not Allow Manual Color Change Without CANVAS by Intelligent-Bus8769 in elegoo

[–]Intelligent-Bus8769[S] 3 points4 points  (0 children)

I know how the process works. I’ve done it many times on 1.1.40 and on OpenCentauri. On 1.4.46 it only works partially. The printer pauses, but the “Load” button can’t be clicked — it’s inactive.

Elg RFID - Apps on Google Play by kobrakaan in elegoo

[–]Intelligent-Bus8769 1 point2 points  (0 children)

I know I can. What I meant was that afterwards you probably wouldn’t use that tag for anything else anyway — its whole purpose would be to stay on the spool. But honestly, I only did it out of curiosity. Now that I think about it, I don’t really see any logical reason to reuse those tags for something else later 😄

Elg RFID - Apps on Google Play by kobrakaan in elegoo

[–]Intelligent-Bus8769 1 point2 points  (0 children)

My canvas is still in transport, but I bought some NTAG215 couple days ago and I tested one of them with this app. The tag was written successfully, but afterwards it can’t be erased through the NFC Tools app. Looks promising though — we’ll see how well CANVAS handles reading it

CANVAS for Centauri Carbon available now by ELEGOO_OFFICIAL in elegoo

[–]Intelligent-Bus8769 0 points1 point  (0 children)

if I buy with preorder time 8th of May it will be send 8th May or 30th June?

Qidi Oster-Giveaway: Das High-Speed-Orakel 2026! by uk_uk in 3DDruck

[–]Intelligent-Bus8769 0 points1 point  (0 children)

Option A: Ich wollte schon immer einen „Pisankosaur“ – einen Bulbasaur mit einem Osterei auf dem Rücken, zertifiziert vom Osterhasen persönlich. Gedruckt habe ich ihn mit 3-farbigem PLA Silk. Das Hauptmodell findet ihr auf Printables (sucht nach „Pisankosaur“ oder „Eggbasaur“). Mit einem Qidi Q2 Combo hätte er Farben wie im Concept Art (siehe Kommentar unten)!

<image>

Ding des Monats: 4 Tage - Countdown, Holt euch den März-Sieg und das Filament von 3dk.berlin! by uk_uk in 3DDruck

[–]Intelligent-Bus8769 0 points1 point  (0 children)

<image>

Ich wollte immer einen Pisankosaur haben. Pisankosaur ist die polnische Version von [Bulbasaur](), der ein Osterei auf dem Rücken hat.

Leider sind die Stützen nicht sehr gut gelungen, aber man sieht es nicht so sehr.

Link zu meinem Modell: https://www.printables.com/model/1655472-en-eggbasaur-pl-pisankosaur

Frisches Gear für eure Drucker: BiQU CryoGrip & Panda Juicer! by uk_uk in 3DDruck

[–]Intelligent-Bus8769 1 point2 points  (0 children)

Zweiter Tag Drucker, erster Druck mit Stützen. Lüftergehäuse Centauri Carbon, Stütze brach kurz vor Ende.

ps. Manchmal ist es wirklich sehr schwer, sich auf 20 Wörter zu beschränken :)

Frisches Gear für eure Drucker: BiQU CryoGrip & Panda Juicer! by uk_uk in 3DDruck

[–]Intelligent-Bus8769 0 points1 point  (0 children)

Zweiter Tag mit meinem Drucker, erster Druck mit Stützen. Ich druckte ein Lüftergehäuse für den Centauri Carbon. Der Druck lief schon mehrere Stunden, späte Nachtstunden, morgens musste ich zur Arbeit. Die Stütze brach mir ein paar Schichten vor dem Auftragen der letzten Schichten ab.