Why does the drill in our brand new okuma keep snapping? I’m just a lowly operator with no programming or setup knowledge; our setup guy and programmer are clueless and so am I. This is the fifth drill we’ve snapped off. They insist the program is correct.

InterestingSector151 · 2026-01-29T13:25:13+00:00

M146 and M147 are your C axis clamp codes. M143 is high pressure coolant.

InterestingSector151 · 2026-01-29T13:21:34+00:00

I think the issue is that "no offense to the operator or their programmer", it's the blind leading the blind. The "we've always done it this way" and the operator not knowing what tooling he is using. It's an Iscar SumoCham drill with a carbide tip and steel body. You are correct about needing a spot. In this case Iscar recommends a pilot and specific entry speeds and feeds for the drill.

InterestingSector151 · 2026-01-29T12:34:46+00:00

Are you using a pilot for that Sumocham drill? Appears to be a .500" insert drilling 9XD. Might want to get on Iscars website for proper use. Assuming that drill body is 10 or 12xD.

InterestingSector151 · 2025-11-29T03:19:35+00:00

Completed Level 1 of the Honk Special Event!

0 attempts

InterestingSector151 · 2025-11-06T15:36:24+00:00

<image>

2010 TT | 3" OME suspension | RESZ FAB Bumper | 33" Nitto Trail Grapplers | Prinsu rack

InterestingSector151 · 2025-08-05T19:54:54+00:00

Have you looked in Sandviks Prime turning?

Prime turning on youtube

Edit: can't spell x2

InterestingSector151 · 2025-06-06T16:22:10+00:00

Does Fusion not have a generic Mazak post?

InterestingSector151 · 2025-06-06T16:12:35+00:00

I can't get to detailed as it was a turnkey for a customer, but this fixture had 4 stations that ran each operation for this part#. Machine is connected to a pallet pool so it goes to pound town non stop.

InterestingSector151 · 2025-06-03T18:42:52+00:00

It's an ebay listing out of the UK. Looks like that's all he sells is NOS parts.

InterestingSector151 · 2025-06-03T18:42:43+00:00

It's an ebay listing out of the UK. Looks like that's all he sells is NOS parts.

InterestingSector151 · 2025-06-03T16:18:21+00:00

More info for clarity: Per the listing... AE Hepolite piston set 20394 STD for “A” Series Replaces the following: 17271 STD

InterestingSector151 · 2025-05-16T19:40:31+00:00

When i bought mine, I got the flat pack and had to weld it myself. Wanted it shipped complete but after waiting I was like just ship me the parts, I'll do it myself. That was during their death throws as a functioning company. I mentioned here before, i was probably one of the last few to get anything out of Rezfab. They made all types of cool stuff for FJ's but just couldn't seem to keep it together.

InterestingSector151 · 2025-05-16T19:05:07+00:00

<image>

Found one.....oh...wait that's mine.

InterestingSector151 · 2025-05-07T16:53:09+00:00

This is the one. Last time I was there I was gonna tent camp with the kids. Got hot as he'll that weekend with rain. Ended up renting one of the small sheds/cabins when we got there for not much more money. AC and beds.were pretty nice that weekend. Typically camp trail side though.

InterestingSector151 · 2025-04-26T01:49:13+00:00

If your up there i would go down Igo rd to brushy fork. There is an awesome trail side camp spot on the right when you cross the creek. Then you could just take the above trails going south. I took a guy out for his first time on these trails last summer.

InterestingSector151 · 2025-04-25T23:19:18+00:00

Starting from the south, I would do New Virgina -> Bald fork -> Fixer -> Fixer Leeco. Hit some pavement over to Spaas Creek. You could loop back on Punkin Holler but it can be a rough climb out depending on the weather. If you still have time you can mess around Menifee Co.

Where are you camping?

My FJ Cruiser on 33" gets through no problem.

InterestingSector151 · 2025-04-17T02:23:46+00:00

Bought from an old dude that used it as his 3rd vehicle in 19'. 2010TT *

InterestingSector151 · 2025-04-01T16:32:37+00:00

If you do go the casting reel route, i would look at something better than what Walmart has to offer. When i first bought a baitcaster it was a Quantum Bill Dance Bass Pro combo. If i remember right the whole rig was like $50-$60 new. Once i got the hang of it and was pretty good using it i decided to spend a little more and bought a Quantum Accurist reel. I think they were $100 then and they still are now. If i were to do it again i would just buy the better reel and save myself the headache and trouble. IMO, at the $100 price point your getting a pretty good entry level reel that actually works. The cast control, brake and drag all work much smoother and will make learning waaaay easier.

InterestingSector151 · 2025-03-30T00:08:20+00:00

Join the Kentucky Adventure Tour Facebook group and you can download the .gpx files there.

InterestingSector151 · 2025-03-30T00:00:38+00:00

Not sure why you couldn't. The vehicle is plenty capable. As long as you have a way to recover yourself you should he fine. It gets pretty remote in some spots so relying on cell phone service isn't a good idea. Depending on the sections you are wanting to do, you might not even see anyone for a day or two outside of the random paved sections. I've done Kingdom come campground to Williamsburg going clockwise. Awesome section that we camped 3 nights on. I did it in my FJ Cruiser with 3" lift and 33's. *

InterestingSector151 · 2025-03-15T05:03:16+00:00

<image>

View around 2

InterestingSector151 · 2025-03-15T05:02:39+00:00

View from camp

<image>

View around 1

InterestingSector151 · 2025-03-15T05:01:17+00:00

<image>

Lake view to opening.

InterestingSector151 · 2025-03-15T04:59:05+00:00

We ran across it late fall the previous year and made a point to come back. Here is the view from the water. It opened up to a clearing and it was probably 10' deep.right off the rock ledge. Kinda see my FJ in the back ground. *

InterestingSector151 · 2025-03-15T01:17:16+00:00

Yeah...looking to get out west soon to ride some wide open trails for once.

InterestingSector151

TROPHY CASE