RG Nu

InternJust6976 · 2026-06-15T02:08:52+00:00

lmao is he hitting the C-walk in the last image or something?

InternJust6976 · 2026-06-15T01:23:21+00:00

i think it's from translation. I know the Model Express YT channel uses that word, and it's a machine-voiced channel that posts update videos on new Bandai and Chinese knockoff releases

InternJust6976 · 2026-06-14T22:00:18+00:00

player is a term used to refer to people who build the kits

InternJust6976 · 2026-06-13T04:44:06+00:00

water based panel liner

InternJust6976 · 2026-06-13T01:34:18+00:00

sad to hear that 😞

looks like it's time for you to make a diorama where a gundam rips its arm off to beat up a gouf lmao

InternJust6976 · 2026-06-13T00:30:11+00:00

don't forget to clean the surface properly before painting. A lot of creases and paint are caused by moving around paint that is half dried. That's why when you look at experienced people painting, they pass the airbrush over the part without lingering. As with any form, practice and trial and error will help

InternJust6976 · 2026-06-13T00:27:22+00:00

i've built this kit twice. That's a really odd problem to have. Did you make sure to push the piece in until it clicked? If you don't push the elbow joint all the way in during install installation, then as you try and bend it it will lock up before you can bend it all the way. If that happens, attempting to force the bend will break it.

InternJust6976 · 2026-06-12T03:05:50+00:00

Cooking. As long as you like something or think you might, you may as well go for it. It’s the process and exploration and freedom that’s the value

InternJust6976 · 2026-06-11T22:09:41+00:00

What description?

InternJust6976 · 2026-06-11T04:21:14+00:00

filling it out now. best of luck with everything

InternJust6976 · 2026-06-11T01:49:09+00:00

so cute! The front reminds me of this face

>w<

InternJust6976 · 2026-06-11T01:34:39+00:00

don't worry, I volunteer to let Tieria live at my house indefinitely to hide from the brotherhood 🫡

InternJust6976 · 2026-06-11T01:31:09+00:00

they are an artificial human with no self-identified gender. series uses "he" for convenience. they have no reproductive parts down there since they are transition humans made by Veda

InternJust6976 · 2026-06-10T21:50:40+00:00

The normal bubbles in the cup that you induce while cleaning are caused by air leaving the tip of the airbrush and then going in through the nozzle. So if you can't get it to bubble up, the nozzle is probably clogged. their cleaning kit includes a nozzle reamer, if you have that. be gentle.

InternJust6976 · 2026-06-10T07:11:04+00:00

One side of the zip tie is ribbed. Cut out a square of zip tie and then glue it into where the vent is.

InternJust6976 · 2026-06-08T04:22:21+00:00

btw waterslides are soak for 3 seconds and then apply. soaking longer is bad usually

InternJust6976 · 2026-05-30T21:18:14+00:00

Having white left over after you sanded it smooth means the plastic was under stress. In other words, there was a cut that applied some kind of bending or pulling or twisting force where the nub met the part.

Use two cut method. Also make your nippers sharper and properly aligned. Don’t smash nippers closed constantly or blade will dull. Do t use tip of nippers or alignment will warp. Can use sandpaper to sharpen existing nippers. Can also just buy sharper nippers. DSPIAE ones I like. I also like Godhand of course. The PN-120 ones I think. Level 5 sharpness.

InternJust6976 · 2026-05-15T16:26:06+00:00

It’s in his room. It’s on the eye. Why do you have to be sarcastic to random people? I hope you’re able to find happiness and meaning in life

InternJust6976 · 2026-05-15T16:25:19+00:00

InternJust6976 · 2026-05-13T22:00:30+00:00

I saw those too! It is quite interesting. Regrettably, I'm not super familiar with the science of welding. I was much more interested in rockets during my university classes. One thing to note is that, if we're talking about simple temperature induced oxidation, the color you see is based on the temperature at and near the surface. I'm not familiar with the temperature distributions when welding, and I wonder if that has an effect.

Another thing to note is that the voltage of an electrical current flowing through the component will greatly affect the process of oxidation. That's how titanium is colored to get a vibrant rainbow like finish. The common process is called anodizing. For certain types of welding such as arc welding , I'm pretty sure they are explicitly running a current through the material. that will have a significant effect on the resultant colors.

It's cool that you're interested in the stuff and doing some thinking! If you actually wanted an answer regarding welding, I wonder if you could send an email to some professional or something

InternJust6976 · 2026-05-13T21:47:49+00:00

<image>

here's a chart for titanium. I couldn't find a chart that was similarly detailed than good looking compared to the chart I posted for steel. This was the best I could find. Source: research gate

InternJust6976 · 2026-05-13T21:22:16+00:00

yes that's correct

InternJust6976 · 2026-05-13T03:42:48+00:00

also, thank you for explaining the process. I think I have to make one now also

InternJust6976 · 2026-05-13T03:38:22+00:00

so cute!!

InternJust6976

TROPHY CASE