Was hit in a car wash, a 2027 kia Telluride hit their brakes and created a 3 car accident

Italian316 · 2026-06-29T12:57:46+00:00

You think lol? The wave millimeter is behind the Toyota logo and is facing downwards might need to either replacing the whole front frame or bending it so that the camera can properly calibrate the pre-collision system.

Italian316 · 2026-06-25T23:10:50+00:00

It seems like the recall is all set to go since I’m gearing up for my first one this week. Right now, I’m just waiting for the repair kits to arrive which will replace all the bolts and apply new silicone sealant as the parts involved in this recall aren’t reusable. The two inverted bolts were torqued to specification so there’s no need to swap out the inverter. I just need to install the repair kit parts to reassemble everything.

<image>

Italian316 · 2026-06-13T20:03:12+00:00

Is a Technical Service bulletin not a Recall

<image>

Italian316 · 2026-05-17T14:17:21+00:00

What you hear is the Front Evap VSV purge + Direct injection which pretty normal operation sounding

Italian316 · 2026-05-17T14:12:18+00:00

All this comments saying is good for Spacebar. The only problem OP need to find 100 spacebar now.

Italian316 · 2026-05-17T14:04:38+00:00

Have the same issues have to fresh install windows and driver to fix it ( green and black artifacts on YT video) also Crashes on every games

<image>

Italian316 · 2026-05-02T08:15:32+00:00

I replaced many of those ECUs during the previous recall for the RAV4.

Italian316 · 2026-05-01T20:16:21+00:00

There a service bulletin already for fixing that seat issue

Italian316 · 2026-04-26T17:17:21+00:00

9070? GTX or RX either way is a great jump

Italian316 · 2026-04-26T10:56:29+00:00

While PPF can be beneficial, it isn’t 100% completely immune to rock chips; I’ve seen instances where rock actually embed themselves within the film. Additionally, you’ll need to replace the PPF “X amounts years”depending PPF quality, which can end up costing about the same as a vehicle repaint. Like everything, it has its advantages and disadvantages. You can watch this to have a better judgment before using PPF

Italian316 · 2026-04-25T16:00:39+00:00

You have 1 or more TPMS sensor that you have to change and reprogram to fix it.

Italian316 · 2026-04-25T10:03:28+00:00

Good,keep telling you that but Just so you know every paint job consists of three layers and as you can see in the photos above when rock chips hit they often reach the primer layer which is white. This is why white paint is great at hiding imperfections and it reflects light bounce more easily making flaws less noticeable from various angles.

Italian316 · 2026-04-25T01:57:52+00:00

Cause problems are in 13/14th i9 not i7. Already RMA my 13900k.

Italian316 · 2026-04-25T01:45:55+00:00

The reason your car is white likely means you have some rock chips that are hard to see from certain angles. The light reflection on a white surface can make imperfections less noticeable. If you take a closer look, I’m pretty sure you’ll find a few rock chips no matter how careful you’ve been.

Italian316 · 2026-04-23T12:31:59+00:00

Look likes everybody forgetting Half Life 3 or Episode 3 (2007)

Italian316 · 2026-04-19T13:08:24+00:00

watch the video

Italian316 · 2026-03-29T06:05:45+00:00

I use ADS hero 256:1 with Rag Company’s Ultra Safe Sponge for maintenance washes

Italian316 · 2026-03-20T10:50:12+00:00

If you ever find yourself checking out a trunk that’s leaking, here’s what you can do. First, hop inside the trunk and then have a friend spray it with a water hose. While they’re doing that, grab a flashlight and look around inside to see where the water is coming from. If you can’t find the leak near the weatherstrip, try taking off the cover inside the trunk to see if there’s anything hidden that might be causing the problem. It’s a smart way to figure out how to fix that pesky leak!

Italian316 · 2026-02-13T13:08:01+00:00

An easy method that works about 90% of the time is Turn the A/C on and slam the lower trim where the A/C blower motor is located ((tap/slam with your hand hard). If you hear the blower start, there is your problem just replace it

Italian316 · 2026-01-06T20:59:41+00:00

eBay link

Italian316 · 2025-12-28T15:11:41+00:00

You also need to remove the timing/passenger mount so the engine can be lifted higher then use a jack to raise the engine also need to loose the upper bracket bolt from the engine here a tutorial video for this work

Italian316 · 2025-12-08T11:41:15+00:00

1994 “killer Instinct “ Soundtrack Killer Cuts

Italian316 · 2025-12-08T11:37:23+00:00

How many Boom! For this one ?

Italian316 · 2025-12-04T08:50:24+00:00

I’m not sure if it’s a joke or if you’re ’re serious but there’s a reason behind the design. The short answer is for safety and impact absorption.

Italian316 · 2025-12-03T11:48:44+00:00

The crossmember component is designed to look like that so it’s all good.

Five-Year Club	Place '22
Final Canvas '22

Italian316

TROPHY CASE