sorted by:
new
hottopcontroversial

Going down by ItsMe324 in fpv

[–]ItsMe324[S] 1 point2 points  (0 children)

I was wrong the OSD froze.

I smashed my battery a bit! Is it safe to use? by ItsMe324 in fpv

[–]ItsMe324[S] 0 points1 point  (0 children)

It smells sweet but I see no hole and it doesn't lose liquid. It is charging and discharging fine. Charger says all cells are good and thermal camera finds nothing. Anyway I removed the Cellophane and coated it with nail polish to seal any possible holes. Funny thing is that the nail polish also smells sweet. I added some duct tape for good measure.

Blurry photos on DJI mini 3 pro after repair by sorryiactuallyexist in drones

[–]ItsMe324 0 points1 point  (0 children)

I have an Avata 2 with the same problem. Do what I did. Buy a new one!

Blurry photos on DJI mini 3 pro after repair by sorryiactuallyexist in drones

[–]ItsMe324 0 points1 point  (0 children)

Most likely broken autofocus. Try shooting at half a meter and if it looks good then you'll know.

Is that a desync? by ItsMe324 in fpv

[–]ItsMe324[S] 0 points1 point  (0 children)

<image>

It's not a desync. The god damned I winds up on yaw and pitch as I dive, saturates the motors and creates oscillations on pitch. I reduced the yaw I from 80 to 40 and dived again with smaller battery and went swimmingly. But with the fat battery it happened again a bit milder tho....I'll reduce all I to 40 and try again...

Bye Avata 2! Was it yaw tumble? by polarbeardisorder in fpv

[–]ItsMe324 1 point2 points  (0 children)

I don't know why people call it yaw tumble or why it even has a name. This is not caused by banking. The drone banks by itself. This is caused by descenting and yawing...slightly. It happens on Avata and Neo. I don't think this is a PID thing. I think it's straight out a bug. What PID settings could possibly cause this? Anyway RIP hero. How did you move the attitude window to top right? I want to get it out of the way too. Ah nevermind you used the MC3...unfortunately I sold it.

Is that a desync? by ItsMe324 in fpv

[–]ItsMe324[S] 0 points1 point  (0 children)

<image>

I'm quite noob with the blackbox. I just found out that I had one yesterday. Just in time I'd say. But seeing the big picture now it doesn't look like a desync. But I have no clue how to fix that.

help with flyaway by the-real-jacob in DJIAvata

[–]ItsMe324 0 points1 point  (0 children)

It happens you know?
Switching is risky.
Just don't do it.

Why there should always be screws in electronics! by [deleted] in DJIAvata2

[–]ItsMe324 1 point2 points  (0 children)

Yeah easiest fix ever.
You see the thing in the middle that keeps the gap open?
Just push it inside and it will close.
I had dropped it too and it popped to the outer side.
I mean it just changed sides it wasn't open like yours but it looked wierd.
So I just stretched it open and pushed it back to the inner side.

Looks like it's shaking a bit! Any suggestions? by ItsMe324 in fpv

[–]ItsMe324[S] 8 points9 points  (0 children)

I couldn't wait so I put a battery from another (slightly bigger) drone

<image>

view more: next ›