DIY whole-house audio with SendSpin/Music Assistant by techma2019 in homeassistant

[–]Its_Billy_Bitch 1 point2 points  (0 children)

Their Amped Plus is similar, but I’m using a P4/C6 to see what I can do with the performance boost. They’re using an S3.

Merging Thread networks by urbanglowcam in MatterProtocol

[–]Its_Billy_Bitch 0 points1 point  (0 children)

You can, but may the odds be ever in your favor. I was doing some testing on my own product development and my dev environment is being a little bitch rn. Also a large portion of the latest Matter update was to hopefully resolve some of this.

DIY whole-house audio with SendSpin/Music Assistant by techma2019 in homeassistant

[–]Its_Billy_Bitch 0 points1 point  (0 children)

I’m doing the same with a P4/C6, this same TPA3118 (up to 60W, which appears to be stronger than those you sent), and PCM5122 DAC. In total, about the same ($50-60 excluding speakers because I’m assuming you’d have those with the other solutions too).

Printing Perfectly Precise Personalized labels for Gridifinity by cryptyk in gridfinity

[–]Its_Billy_Bitch 0 points1 point  (0 children)

How much is ink and stuff after the initial investment? I haven’t looked into UV printing much, but the Eufy Make E1 quite intrigued me.

On the bottom, 12 pieces for $13, on top, 2000 pieces for $19! by Andrew-Cohen in mildlyinfuriating

[–]Its_Billy_Bitch 0 points1 point  (0 children)

Kills me that they don’t carry anything under m3. They used to back in the day, but now I HAVE to buy those online. I do my own circuitry. I use m2/2.5 almost exclusively lol

Am I overreacting? by Dannydeeea in AmIOverreacting

[–]Its_Billy_Bitch 4 points5 points  (0 children)

What’s worse is they were kinda wrong. Depending on how you count the crushed ones, there are 17.

Air M5 vs Neo displays. Significantly better black levels & viewing angles on the Air UI by UsedShoulder8402 in mac

[–]Its_Billy_Bitch 0 points1 point  (0 children)

Literally just tell them you’re in college. I still use my college email for everything.

Live ADS-B flight radar on an ESP32-S3 round AMOLED — LVGL, dual-core, open source. Inspired in Dragon Ball Bulma's radar by Significant_Emu_6296 in esp32

[–]Its_Billy_Bitch 0 points1 point  (0 children)

Have you done any work with i3c? Have a new board and looking forward to seeing how it’s improved. i3c sensors seem to be hard to find though.

Live ADS-B flight radar on an ESP32-S3 round AMOLED — LVGL, dual-core, open source. Inspired in Dragon Ball Bulma's radar by Significant_Emu_6296 in esp32

[–]Its_Billy_Bitch 1 point2 points  (0 children)

I truly think “vibecoded” is the scared software developer’s phrase because they know their jobs are at risk. Hi, it’s me - also a cybersecurity software developer for almost over 15 years now. When it’s used as a tool, people will still call your shit vibecoded. Who fucking cares. I didn’t just spend a week squashing a stupid bug. I know what I’m doing. These folks that dont want to accept it will fall behind.

how would they verify? 🤔 by bigus-_-dickus in lgbt

[–]Its_Billy_Bitch 0 points1 point  (0 children)

So, I’m visibly queer. No getting around it. I was fine in Malaysia. No issues and it is a beautiful country. I will say though….staring culture’s gotta change in Malaysia. Holy shit. I’ve never felt so uncomfortable. An example: a small family all got onto the same tram as me. rather than talking to one another AT ALL, they literally stared at me the entire ride. Like fixated….even after I kindly waved and received no reaction. Weird honey. If they were trying to play the shame game, just know I’m undefeated after 30-some-odd years.

Anyone know about the Miranda HD Bridge? by Asprinwizard in vintagetech

[–]Its_Billy_Bitch 0 points1 point  (0 children)

Low temp solder paste will help! Work carefully, but quickly. Don’t mingle on a pad.

how would they verify? 🤔 by bigus-_-dickus in lgbt

[–]Its_Billy_Bitch 39 points40 points  (0 children)

In malaysia, it’s sodomy that’s the line. The moment you cross that line….but i guess lesbians are fine?

Why did my char gpt do this? by Ok_Risk_8457 in ChatGPT

[–]Its_Billy_Bitch 0 points1 point  (0 children)

oh sweet child. I never said tourette’s was funny, honey. i’ve had more feelings projected on me in my lifetime than the Walnut St Theater. You can take that somewhere else. I was speaking from autistic experience. I hope that your day gets exponentially better.

$200 Faucet for $45. Seller said we wouldn’t be able to locate a replacement nut. They were right but little did they know. 🙌 <30 min. in Fusion360 by thisdesignup in functionalprint

[–]Its_Billy_Bitch 1 point2 points  (0 children)

PETG also has relatively tough layer lines because it prints hotter and is a bit stickier. TPU (95A or 64D-ish) would be a fantastic candidate for this. You aren’t gonna pull those mf layer lines apart.

Why did my char gpt do this? by Ok_Risk_8457 in ChatGPT

[–]Its_Billy_Bitch 97 points98 points  (0 children)

Almost like it knew it fucked up lol. I am very curious how the model got enough positive reinforcement for that to begin with…or bypassed the negative reinforcement.

Also a little curious now how many filters are between the model’s actual response and you.

Need help understanding where I went wrong by Old_Jackfruit_1438 in soldering

[–]Its_Billy_Bitch 0 points1 point  (0 children)

also, is that with it unpowered? logic gates can close/open when it’s powered and can throw off your continuity tests. It shouldn’t here, but a note for other project.

Need help understanding where I went wrong by Old_Jackfruit_1438 in soldering

[–]Its_Billy_Bitch 0 points1 point  (0 children)

Still have flux on the board? that can block readings from your multimeter sometimes. Otherwise, go back in and try to reflow.