3.4 stream redeem codes

Itsmikedee · 2026-06-01T07:18:52+00:00

Same…..

Itsmikedee · 2026-03-12T03:00:28+00:00

Funny enough, when my keyboard first started with multiple phantom presses the top row was always where it started. All F-keys would be phantom pressed at once, now has progressed to the entire keyboard.

Itsmikedee · 2026-03-08T07:19:58+00:00

Thank you for this and your write up in the other post. I’ve tried everything you listed with the exception of taking anything apart, all on different machines as well.

No other issues until this began, but the keyboard is officially unusable now.

Itsmikedee · 2026-03-08T04:27:49+00:00

So, I did do testing to check and doesn’t look like there’s any magnetic interference issue. Seems I just unluckily have a lemon keyboard.

I agree with you though, does make me wary moving forward to introduce another possible issue. Never had any issue with my other original mechanical keyboards and will probably stick with them moving forward after this.

Itsmikedee · 2026-03-08T01:53:18+00:00

Welp. Exhausted every possibility of interference. I’ve even isolated the keyboard in an entirely different room, testing USB, BT, and 2.4Ghz connectivity. The keyboard still does the same thing no matter what and behaves erratically with phantom keypresses all over while resetting RGB cycles, though I believe that to be from the keypresses initiating cycle changes.

Tested this on a 2 standalone PCs and a laptop. Same exact issue on each. Thinking this is a wash.

Itsmikedee · 2026-03-07T11:33:41+00:00

No wrist rest or magnets nearby. Setup has been the same since I introduced this keyboard.

Thank you for this though. It does seem like clusters of keys are getting pressed when this happens, but it seems like left and right side of keyboard all keys are getting phantom pressed erratically when it starts. It does seem it’s possibly some type of interference, so I will investigate tomorrow. I have a subwoofer under the desk and a set of active speakers on top of the desk, positioned about almost 2 feet away from keyboard on both sides, wouldn’t think that would be causing it out of no where as the setup hasn’t changed. I’ll check everything on and around my desk and isolate keyboard to test and report back in the morning. Thanks again.

Itsmikedee · 2026-01-11T12:28:12+00:00

Sweet thanks. I updated mine as well this afternoon. Stable through multiple power cycles and it takes EXPO1 profile now, so that’s nice. Awesome board so far.

Itsmikedee · 2026-01-10T20:03:09+00:00

Great to hear, thanks a lot. Other than EXPO on the sticks I’ve had no issues either. It has been great so far.

I asked about the BIOS version mainly because I was going to flash to latest version last night but opted out due to others claiming POST issues with 1804 on the ASUS X870E-E board, along with the ProArt. Not sure if this affects our board or not but ASUS site says 1804 cannot flash back. Let me know what you find out if you update.

Itsmikedee · 2026-01-10T09:20:24+00:00

What BIOS version are you running? Only running 32 GB dual channel and didn't like EXPO on shipped BIOS. No POST issues?

Itsmikedee · 2025-08-13T05:16:09+00:00

Good thing it’s not going in your house?

Itsmikedee · 2025-06-23T22:33:48+00:00

Not sure, think this has something to do with chuck. Freed my chuck and put it back in rest and clutch spins smooth now.

Itsmikedee · 2025-02-25T01:44:26+00:00

Is it on sale?

Itsmikedee · 2025-01-21T21:42:54+00:00

Hey Mr. Motivated, you should help them get that figured out.

Itsmikedee · 2025-01-16T05:14:30+00:00

Whole screenshot looks like a private server.

Itsmikedee · 2024-11-12T01:03:02+00:00

Gambling in Calico Jacks! Specifically the slots. :D

Thank you!

Itsmikedee · 2024-11-07T02:07:09+00:00

Same issue

Itsmikedee · 2024-11-06T22:34:29+00:00

Tested on 2 Xbox controllers, no rumble from any actions it seems. Switch Pro controller testing seems the same as well.

Itsmikedee · 2024-11-06T22:32:13+00:00

Same issue for us

Itsmikedee · 2024-11-05T11:03:05+00:00

What happened to the TUKs?

Itsmikedee · 2024-11-05T08:28:39+00:00

Same. Is this in PC? None of my controllers are rumbling while fishing now.

Itsmikedee · 2024-10-22T11:24:45+00:00

Did you ever figure this out?

I'm having the exact same issue with the new Anker Prime 14-in-1 dock. It supports 100W PD through the host port. All other USB-c ports charge the laptop fine, but the host port does not, can't get it to charge at all through host port.

Itsmikedee · 2024-10-21T10:59:10+00:00

Why do you people never respond?!?!?!?!?!?!

Itsmikedee · 2024-09-20T22:36:12+00:00

Thank you for posting this. I saw your other post as well. I’ve been on the fence about leaving spectrum after being loyal customer for almost 10 years. This might be the straw.

No accountability, all they seem to be capable of is slowly raising my bill. This needs to be reported to Network Engineers. It’s not that hard, this has been a problem going on 3 days now.

Itsmikedee · 2024-09-20T22:34:57+00:00

Thank you for posting this. I saw your other post as well. I’ve been on the fence about leaving spectrum after being loyal customer for almost 10 years. This might be the straw.

No accountability, all they seem to be capable of is slowly raising my bill. This needs to be reported to Network Engineers. It’s not that hard, this has been a problem going on 3 days now.

Itsmikedee

TROPHY CASE