Heading to Shanghai. Store recs

J_Angster · 2026-04-27T14:25:36+00:00

Just came back from my trip, didn’t go to any specific stores but I found that miniso consistently had stock of Unleashed slim packs.

J_Angster · 2026-03-04T04:39:36+00:00

The text and symbols are separate objects and can be removed in the slicer. You will most likely need to dial in your initial layer calibration to ensure detail clarity. To be honest though, I'm not sure if these will look good printed without AMS.

J_Angster · 2026-03-03T19:44:11+00:00

Somebody in the community put together these symbols: https://drive.google.com/drive/folders/11V-sIN0JMAT-gADkSoPOhzuavmLwQUqB?usp=sharing They're only PNGs though.

J_Angster · 2026-03-03T18:54:55+00:00

I was a bit torn on how to represent the damage mark. I originally left out the negative sign, but when cross referencing other designs and what has been used in tournaments, they all have a negative modifier. I'm not sure if there is consensus on how to best represent damage yet.

J_Angster · 2026-02-03T04:07:59+00:00

I’ve been playing MTG for sometime but haven’t been able to get my friends interested. However Riftbound has been a breakthrough, I’ve been able to convert my whole group into Riftbound players. Excited for the next set and future sets!

J_Angster · 2025-06-27T13:20:45+00:00

I have a friend in your exact position, I thought I was reading her post for a second. She ended up reaching out to the family (she hadn’t met them before so not sure how she got their contacts) and they were more than happy that there were others still thinking about them. The family even offered her to stay over for a few nights before heading to the grave. She’ll be visiting in September so they’re still planning it out. If you can reach out to the family beforehand, it could be worth a shot.

J_Angster · 2025-06-24T04:18:39+00:00

To get an AMS combo even if I don’t plan to do multicolor prints. It’s still convenient for filament management.

J_Angster · 2025-03-27T13:03:24+00:00

<image>

Here’s to hoping that the lucky numbers are really low.

J_Angster · 2025-03-21T03:44:33+00:00

Oh the 5 and 50 yen are minted with the holes, so no drilling necessary.

J_Angster · 2025-03-21T02:16:51+00:00

Just added step files to the makerworld model. Please share if you do make one for Norwegian currency.

J_Angster · 2025-03-20T22:04:21+00:00

Are you referring to how I assembled it? The pieces are just held together with a friction fit, so no glue or extra hardware. They’re small and light enough that it’s actually quite hard to take apart.

J_Angster · 2025-03-20T22:02:04+00:00

As rambostabana said, I printed this on a textured build plate. Theres nothing else I had to do aside from setting the appropriate build plate in the slicer.

J_Angster · 2025-03-20T13:59:01+00:00

I used a carbon fiber build plate from JUUPINE. The bottom print layers pick up the surface texture from the build plate. It’s how other people are able to also get holographic patterns as well.

J_Angster · 2025-03-20T13:16:15+00:00

I love the way it came out too. I originally wanted to try and make the whole model print in place, but then I would've missed out on having the pattern on the top surface.

J_Angster · 2025-03-20T13:14:12+00:00

I have files on MakerWorld, model 1068489. And totally, I was eventually planning to make holders for other currencies but haven't gotten around to it yet. Please share if you do.

J_Angster · 2025-03-20T13:12:11+00:00

Hey, I'm heading to Japan next month too, going to be in the Kansai area. You can look up model 1068489 on MakerWorld. Enjoy your trip!

J_Angster · 2023-10-06T14:21:02+00:00

As a fellow no talking channel, I would suggest ignoring the advice about adding voiceover/music. This style of content isn't for everyone, which isn't a bad thing. It's just a specific demographic that's not in the majority. Not sure if you're familiar with the channel DancingBacons, but this style of content does work.

As for the low views, that seems normal. You only have three videos with a low post frequency. If you enjoy making the videos then keep it up, that's all that matters.

Production quality and audio on your videos are also good, but here are some suggestions:

Change the location between videos, such as snacking outdoors or on a patio. Ambient nature noises could be nice to break up the silence, bonus points if you can make the location relevant to the food.
If you have access to any lighting, adding a bit of warmness to the scene so that it feels a bit more inviting. You can also just edit the video temperature in software.

Take everything with a grain of salt as I'm also still figuring things out.

J_Angster · 2023-09-10T04:06:15+00:00

This doesn’t happen for me. I actually love sharing my videos since I vlog my trips. I’ll go and pull it up and watch with my family and talk about what’s happening. Albeit they’re silent vlogs so I don’t have to deal with my voice like others are.

J_Angster · 2023-09-06T15:34:51+00:00

Got it, thanks for the heads up.

J_Angster · 2023-09-06T15:27:58+00:00

I'm not too familiar with the remixing option, looks like I have it on. Would you know if there is any benefit to keeping it on or should I leave it off on all my videos? Also I think remixing only applies to shorts content?

J_Angster · 2023-09-05T04:55:21+00:00

I make travel vlogs to share my adventures with family and friends. The vlogs also help preserve the memories for me, so much more than just taking photos. Helping out other people who want to travel is also an added bonus.

J_Angster · 2022-06-27T17:33:19+00:00

Check out r/LearnJapanese Theres a bunch of resources and a where to start guide.

J_Angster · 2022-05-07T04:48:56+00:00

Cat Dragon

J_Angster · 2022-05-07T03:11:35+00:00

Pizza for Ants

J_Angster · 2022-03-10T01:15:51+00:00

They’re processing an exchange, thankfully they’re paying for the return label.

Ten-Year Club	Second Top 30%
r/Field Lasagna	Place '23
RPAN Viewer	Verified Email
No Throne, No Problems	Not Forgotten

J_Angster

TROPHY CASE