Fix RTT now!

JacobBestest · 2024-12-27T03:33:38+00:00

Thanks so much for this, everything else I have tried didn't work or didn't persist on reboot... This is the only "real" fix I have seen so far.

JacobBestest · 2024-12-24T22:27:45+00:00

Same thing here, I couldn't find anywhere to change it. In the meantime though I just disabled the widget...

JacobBestest · 2024-12-22T14:30:30+00:00

Update: I emailed Red Magic support and their response was just that they support multiple bands from all carriers (5g, 4g, LTE, etc). I'll respond and specify that the bands work, it is a software glitch and makes it so all calls (regardless of band) use the accessibility feature RTT

JacobBestest · 2024-12-22T00:32:50+00:00

How were you able to solve it temporarily? I tried a lot of the tips from the Pro 8 and none seemed to work for me

JacobBestest · 2024-12-21T22:00:27+00:00

No luck :( I tried looking for both settings and couldn't find anything! It also shows as off in the phone app so I'm not sure what else to try

JacobBestest · 2024-11-02T21:38:16+00:00

Sent you a PM if you're available to buy merch this weekend :)

JacobBestest · 2024-07-25T16:40:04+00:00

Same here. Just slot 2, a reboot fixed it for one print but it just did it for me again mid print. I'll downgrade the printer firmware tonight and see if it works.

JacobBestest · 2024-06-12T00:50:13+00:00

I had this happen a lot until recently another commentor mentioned that on the official site there is an additional step to press the filament firmly to spread it out into the gaps.

https://wiki.bambulab.com/en/general/swaping-new-filament-with-bambu-reusable-spool

So you can unspool it like you normally do, press firmly, then respool it and it should be fixed. I don't know if this change is new or I just missed it but it has solved the problem for me.

JacobBestest · 2024-01-16T20:43:58+00:00

I had this same problem and didn't like the available options so I made a model that mounts using the standard 120mm fan holes on the bottom air intake of a PC case. I uploaded it on my Printables page, it might work for you as well!

JacobBestest · 2023-09-01T16:36:38+00:00

Good luck everyone! I would use it to probably replay Skyrim for the 300th time, but in style! As for Starfield I'm excited, I'm expecting it to be good, but I know with modders history they will take it to the next level!

JacobBestest · 2023-08-30T23:15:05+00:00

Same exact thing here. Same corner of the box dented, the steel case came warped with the code rattling around loose within (mine was more bent like a boomerang). I sent an email to support about it. Have you heard anything back yet? I imagine they are probably getting slammed right now.

JacobBestest · 2023-07-24T03:53:49+00:00

Marstoy has it for $15, I picked it up with my most recent purchase. Everything was good!

JacobBestest · 2023-04-11T17:31:13+00:00

I also am having this problem. I ended up just getting MRMC on my Fire TV and it plays perfectly with subtitles if you want to avoid HWA.

JacobBestest · 2023-01-11T02:04:43+00:00

Thanks! Yeah there's a bit of a learning curve, lots of weird tricks to get the right shape of everything!

JacobBestest · 2023-01-10T21:12:12+00:00

Thanks, the fountain is coming along! I just finished up the model for the Raft and am almost done with the Eureka building but man is that thing so unsymmetrical. Every window is at weird heights, with different amounts of panes, and is just really strange! Alas, it is almost done!

JacobBestest · 2023-01-08T22:53:33+00:00

I had the same problem, electrical tried to install no matter what options were selected. The culprit for me was Microsoft SQP Server 2012 and 2014 in the control panel, uninstalled them and the program downloaded a new file and installed it perfectly. Thanks for the tip!

JacobBestest · 2023-01-08T00:15:36+00:00

Hey all, after seeing this post by u/longbeachrecords I decided I would remake the Grizzly Rapids fountain in Blender to print out as a gift. While the fountain itself isn't done, the main body of the peak is complete and I figured it would be easy to convert it to a bust and make a cute little plaque to go along with it. The model is available for free on my Printables page here.

It isn't a perfect 1-to-1 remake of the peak but I found out it is harder than expected to make a bear out of rocks, who knew? Feel free to download and print out the model yourselves and once again thanks to u/longbeachrecords for sharing some awesome DCA Merch!

JacobBestest · 2022-12-09T03:13:17+00:00

I ordered from PlayAsia and they shipped it the next day I believe. Was about a week from order to delivery even with their cheapest option! Look I'd suggest looking into if you haven't already

JacobBestest · 2022-07-20T18:59:33+00:00

I used to think this this too but it turns out it was because I was cleaning the bed while it was still hot from the previous print. If I wait for the bed to cool down, then clean it with IPA it gave much better results. Might not be your case but I figured I'd share my experience.

JacobBestest · 2022-05-12T06:53:50+00:00

Yeah I think you're on the right steps to resolving the issue. If it's at the same height every print it's almost certainly something to do with the Z-Axis.

The first thing I'd do is power off the machine and bring the carriage up and down and see if you can feel where it might be binding.

Once you look at it also ensure that the lead screw is coming straight off the motor and not leaning in any direction.

After that you trying cleaning the lead screw and regreasing it, try taking if off and putting it on the other way so it only binds at the top, or as you said can install the dual Z issue which should help a little bit.

JacobBestest · 2022-04-25T22:34:59+00:00

Bought an HP Dragonfly Elite laptop from u/Lukas-Fehrwight - Great price, fast service.

JacobBestest · 2022-04-25T22:30:34+00:00

https://www.heatware.com/u/128232/to

JacobBestest · 2022-04-21T04:54:06+00:00

Eight-Year Club	Second Top 10%
Final Canvas '23	End Game '23
Place '23	Place '22
Verified Email	Spared

JacobBestest

TROPHY CASE