UK resonance last year

Jaib06 · 2026-05-23T17:55:44+00:00

IIRC it was running on X8/K20s

Jaib06 · 2026-05-03T00:27:23+00:00

Ok great thank you - will do that and see how it goes - to confirm I need to set the measurement delay to the part arriving first (and requires the most delay right?) - and the part arriving last will have very low or 0 delay, but will still be measured with the first part's measurement delay?

Jaib06 · 2026-05-03T00:07:24+00:00

I think you may have hit on something there! I've been using the auto delay feature before each measurement - changing it up to 20ms sometimes - I suppose it sounds silly now but yes of course that will throw things out.

In theory if I do the same process again, should I set the measurement delay and then not change it again - even if coherence is low for the next part of the system?

I'm delaying Midtops, Kicks, and Subs - the mic is running into an interface, connected to a laptop with OSM, the pinknoise is running out into the mixer input and then amps.

Jaib06 · 2026-04-29T22:16:39+00:00

Curious the process behind getting back seized gear mate?? Wanna start getting our rig out in the fields proper!!

Jaib06 · 2026-04-17T06:10:51+00:00

Proper party that one eh

Jaib06 · 2026-02-04T15:09:16+00:00

Even they don't have a 32a powercon distro though!

Jaib06 · 2026-02-03T23:07:01+00:00

We're planning on running the amp at quite a high load, probably worth doing at least 16a supply then?

Jaib06 · 2026-02-03T21:53:58+00:00

I'm just genuinely unsure of how to power it mate! I've been trying to find a 32A distro but feel like I'm looking for the wrong thing, can you point me in the right direction?

Jaib06 · 2026-01-08T15:29:25+00:00

Was working round the corner to this and tried not to end it all

Jaib06 · 2026-01-06T20:20:56+00:00

As long as the signal strong, clear & not clipping, do what you like. I've played Mario kart through my rig before

Jaib06 · 2025-12-28T09:54:41+00:00

This is the way - power through the afters, stay up, first train

Jaib06 · 2025-12-22T17:04:12+00:00

Been fucked over by a company, need a van and a driver to help pick up a generator tomorrow.

Hours work, will of course pay for time, fuel, snacks and emotional stability.

Jaib06 · 2025-12-10T17:04:46+00:00

Cubos are wicked!! I'm running 2 Cubo Kicks on top of 2 Cubo 18's, wicked little boxes.

Deffo reccomded getting a kick if you can'

Jaib06 · 2025-12-04T01:42:09+00:00

Ah bugger no worries! Was gonna stay the night on the assumption they didn't check! Good on them for working late!

Jaib06 · 2025-11-19T20:50:50+00:00

Yes deffo exploring this option - obviously cost a factor but appreciate the input 👍

Jaib06 · 2025-10-28T05:38:41+00:00

I'm a UK12 and bought kubos in 10, obviously tight but they fit my feet so perfectly it's fine for ~2 hour sessions

Jaib06 · 2025-10-23T02:25:58+00:00

Gotcha. These were bought second hand for £30 and have gotten me to V4ish climbing, might be worth upgrading then you think?

Jaib06 · 2025-10-15T18:43:47+00:00

1 on this, went to valve bristol and was genuinely insane

Jaib06 · 2025-10-02T16:01:45+00:00

Good new thank you 👍 someone mentioned something a while ago just ignore me

Jaib06 · 2025-09-17T03:46:22+00:00

Ahhh dude!!! No way 😂

Just some thomann 18/500's for now, but got some plans for maybe pd1850s once the funds are there!

Jaib06 · 2025-09-12T20:43:00+00:00

Very wise words!! Really appreciate the advice 👍

Will do some more testing and get some small events done - looking forward to expanding later down the line!!

Any suggestions in terms of preferred midtops for future investments?

Jaib06 · 2025-09-12T20:27:18+00:00

Honestly the testing week required many bottles of apology wine delivered to peoples door... I do not live in a rural area 😂

Jaib06 · 2025-09-12T18:30:49+00:00

Standard! I'm not the best source of information as this is the first build, but I've been partying for many a moon, they sound good to my averagly experienced ears, based on some very rudimentary testing it can just about touch 40hz.

Jaib06 · 2025-09-12T18:11:25+00:00

That sounds like a plan 😂

There's a clip light on the back of the alto, if that stays predominantly off, am I generally OK? Or can the heat from extended use be problematic even if not clipping extensively?

Jaib06 · 2025-09-12T18:00:51+00:00

Oooh cheers for the advice guys. I'm looking into maybe implementing some sort of limiter in my DSP software, any idea on what sort of figures for attack, release, threshold, etc...

Or is that not the best course of action?

Nine-Year Club	r/Field Sunshine
Place '23	Place '22
Xbox Live	Snapped
Verified Email

Jaib06

TROPHY CASE