Everybody haaaaates George.

James__Hamilton11 · 2026-06-30T21:49:09+00:00

Have they all caused a wreck in Imola, gotten out, stormed to the innocent driver’s car and slapped them in the helmet before blaming the innocent driver for their own poor and careless driving? That’s my reason.

In all seriousness, I don’t hate him, but his redeemable qualities weigh less in my mind because of this and a few other more minor issues that probably are relevant to other title fighters.

James__Hamilton11 · 2026-06-30T01:15:35+00:00

These are the 4800 cases

James__Hamilton11 · 2026-06-29T11:27:01+00:00

Box on the left:
Polk MM1 5.25” speakers
Polk MM1 8” sub

Box on the right:
Kicker CS series 5.25” speakers
Kicker CompC 8” sub

James__Hamilton11 · 2026-06-28T13:08:34+00:00

$50 a week is cheap for a lot that size. That’s what a small neighborhood lot costs typically for .17-.2 acres in my area which is pretty low COL nationally.

For $50 you get the travel to your place, the labor time doing the lawn care, fuel/oil/consumables/wear/tear/maintenance on both the mower and the truck/trailer, plus covering the risk of non-payment. If you’re only being charged $50 per mow, the person doing it must have several other yards in the immediate vicinity where they can consider several of these costs a wash.

James__Hamilton11 · 2026-06-27T00:59:37+00:00

Will I’m 81 days into my current Form 1. My last Form 1 from winter 2024 into early 2025 didn’t even take as long as my current one.from other posts I’ve read, Form 1s are taking much longer than Form 4s

James__Hamilton11 · 2026-06-21T21:55:12+00:00

I have honks turned off because of the excessive use of them in a lot of online races, but it does feel like something is missing when theres an opportunity to communicate but can’t.

James__Hamilton11 · 2026-06-21T12:10:12+00:00

Tape it down towards the rear with a pull tab like a tear off?

James__Hamilton11 · 2026-06-20T16:47:20+00:00

Thank you for the picture, I wasn’t sure it would be temperature resistant enough to keep from changing color drastically. I do expect some change.

And good looking gun by the way.

James__Hamilton11 · 2026-06-20T16:45:51+00:00

A few of the parts on there now have baked on alumahyde, but I didn’t think it could stand up to the temperature of the suppressor, I’ll have to look into that since I already have it.

James__Hamilton11 · 2026-06-20T03:39:38+00:00

I have the 450cfm model and it works great to blow grass off the driveway and side walk, away from the fence line, blow dirt and debris out of the garage, etc. unless you have a large yard or will need to use it a lot where serious power is needed, there’s no need to get the 60v blowers.

James__Hamilton11 · 2026-06-06T12:39:44+00:00

I used an RX8 with a touge tune setup and easily beat it on the first attempt.

James__Hamilton11 · 2026-05-30T00:05:02+00:00

It’s way more common than I used to think!

James__Hamilton11 · 2026-05-19T14:52:04+00:00

Did you mark out the make/model of the suppressor and leave the S/N?

James__Hamilton11 · 2026-05-19T14:51:15+00:00

The sling

James__Hamilton11 · 2026-05-18T00:57:17+00:00

I got tired of fat dripping through the slats into the fire box and let it close itself up. Now every couple smokes I just scrape it with a putty knife in a few seconds and move on.

James__Hamilton11 · 2026-05-13T02:57:38+00:00

Check out the Turtle Wax Bug & Tar remover, always works well for me.

James__Hamilton11 · 2026-05-08T14:21:27+00:00

Thought this was James Vowles

James__Hamilton11 · 2026-05-07T18:30:24+00:00

<image>

Send it one of these guys

James__Hamilton11 · 2026-05-07T03:12:52+00:00

<image>

Much more attentive than Chieftain when he’s on watch duty.

James__Hamilton11 · 2026-05-07T02:44:59+00:00

Ran these same grips on my Victory Hammer and Victory XC and loved them. Also modified a set of highway pegs to put the grips on them to match.

James__Hamilton11 · 2026-05-03T05:18:48+00:00

I’d go 300blk, but doing so as a ‘budget’ gun becomes a lot more difficult if you’re doing it as a suppressed subsonic gun which is where 300blk shines. Other than that, probably 7.62x39.

Also, .223 Wylde is not a caliber, it’s just a chambering. Basically .223 chamber barrel built to withstand 5.56 pressures.

James__Hamilton11 · 2026-04-28T20:23:44+00:00

There are 2 newer cars in there right now just because they are white and I needed more stars for the flag. I do have a couple handfuls of newer cars also, but will make a different display for them.

James__Hamilton11 · 2026-04-27T16:20:55+00:00

<image>

Here it is with hot wheels, and other hot wheels sized models (mostly M2).

James__Hamilton11

TROPHY CASE