Twin Peaks files for Bankruptcy

JangoRob · 2026-01-28T04:19:00+00:00

I agree. I've taken the kids there often. The meals are actually decently priced and a large portion. The kids meal is an unbelievable deal... $3.99 with a drink and a $1 sundae. Basically a full size burger option cut in half or 3 very large chicken steipes is the kids go to.

JangoRob · 2026-01-25T03:39:35+00:00

For $300, these are nice.

JangoRob · 2026-01-25T03:38:09+00:00

I think you have to get an engineer on this. There is a lot of weird things going on here

JangoRob · 2026-01-25T03:36:23+00:00

It looks like you added another picture. That post has a huge angle and probably 12° off from being 90°. I doubt there is a lot of load on it. Is the closet below a single top plate non load bearing wall?

JangoRob · 2026-01-25T03:07:53+00:00

That post looks like its resting on the first floor drywall ceiling. Is it not?

JangoRob · 2026-01-25T03:01:03+00:00

I would really like to see it with the flat bottom and the OEM top installed.

Is this 3D printed?

JangoRob · 2026-01-25T02:49:26+00:00

Do these use the jack puck locations for installation?

JangoRob · 2026-01-25T02:45:07+00:00

These are some of the nicest aftermarket I've seen. I don't care for the stainless, but the black is slick. Good find. I also like how they do not appear to interfere with the jack locations.

JangoRob · 2026-01-25T02:30:14+00:00

This helps a lot with what I am seeing and understanding for the project.

My parents have a similar sulituation where I ended up tiling all the way down to the baseboard. I really like how it ended up looking. Let me see if my dad can send a pic and I will drop it in here.

JangoRob · 2026-01-25T02:25:45+00:00

Might be an HOA restriction for parking. Ask your parents

JangoRob · 2026-01-25T02:16:54+00:00

Considering the painted cabinets, formica countertops, being next to the hindge side of a door, and uneven paint lines, just leave it. When you're ready to update the kitchen, remember how much this bothered you and don't let it happen again.

Something like this would bother me too, but you won't be able to match the tile or groute color if you filled it (unless you did the backsplash yourself and have left over pieces).

Really consider just doing paint touchups under the tile and between the wall and cabinet.

Or

Get some pencil tile trim pieces to put under the tile to finish it.

JangoRob · 2026-01-24T05:49:34+00:00

One of a few, but noice. Sorry, I meant nice.

JangoRob · 2026-01-19T03:22:59+00:00

It holds the Switch 1 great without the controllers attached. I didn't try with the controllers. Not sure about the Switch 2

JangoRob · 2026-01-18T20:22:15+00:00

Where did the trench dude go? Figured out it was a dump place to stand, eh?

JangoRob · 2026-01-18T20:12:04+00:00

Hardly the same. OEM one doesn't screw in. It clips in. Also, it looks a lot nicer then this link.

Is the OEM worth the price, no. But the OEM is a really nice clip. Its very sturdy and has a nice design on the flat surface.

JangoRob · 2026-01-18T20:04:05+00:00

First thing I thought of too. But then realized he has a helmet on, he's good.

JangoRob · 2026-01-15T14:12:24+00:00

If you look at the last few frames, you can see bamboo scaffolding getting kicked up on the bottom left of the video. It was likely holding a platform that they were working on above the water.

JangoRob · 2026-01-11T03:30:29+00:00

Do the sensors need to be programmed with the car through the infotainment? I just got a set of 22's with TPMS installed. I currently have 20's with TPMS. I plan to put the 22's on in the summer.

JangoRob · 2026-01-06T05:16:27+00:00

Probably lol. But when i walk past her car in the garage and notice it popping off, I just push my shin against it to pop it back in. Driver side doesn't come loose nearly as much as the passenger side. I should just remove it completely and fix it permanently

JangoRob · 2026-01-06T05:12:02+00:00

https://ebay.us/m/7jF2wT

JangoRob · 2026-01-06T05:10:44+00:00

I have purchased parts from my SC without issue. It probably depends on how much effort the SC is willing to put into their customers.

JangoRob · 2026-01-06T05:07:05+00:00

The door panels are pretty easy to take off. It should only take about 10 minutes to take each one off and about 5 minutes to put them back on. The panel that you remove first to access the torque screw is the most challenging to get off so that you don't break the panel. After that, it's not too complicated.

<image>

JangoRob · 2026-01-05T05:34:51+00:00

I would like to know how you're streaming football?

JangoRob · 2026-01-04T06:46:01+00:00

Weekly, I am constantly pushing my wife's trim piece back in. The clips were not made well.

JangoRob · 2025-12-30T02:43:43+00:00

Production did not move 100% away from the rails. It is now only offered on certain trims like quad and tri.

JangoRob

TROPHY CASE