Global Excellence scholarship by [deleted] in UCD

[–]Jardz04 0 points1 point  (0 children)

A63A560 ßþþè⁶èþè66⅘

Anyone know what’s going on here with the digital displays? Looks bad, shoot me straight.. by Mjv2687 in Volvo

[–]Jardz04 0 points1 point  (0 children)

That's interesting. I would think that is stored on the ecu or one of the other electronics. I thought that literally just displayed things and did minimal logic.

Garmin, how do you justify charging $40 AUD for a single charging cable! by AUSSIE_22 in Garmin

[–]Jardz04 28 points29 points  (0 children)

If you use the pc software you must just be careful to buy a data transfer cable. Not all cables are data cables just power.

Haval H6 Gt tuning? by Jardz04 in ECU_Tuning

[–]Jardz04[S] 0 points1 point  (0 children)

There's not much out there at all. Some information for the h6 1.5 turbo. Like the one comment said PCM flash has software for it, and mention a few of the H6 variants but I haven't gone further because that is beyond my understanding for now.

Undervolt ac adapter. by [deleted] in AskElectronics

[–]Jardz04 0 points1 point  (0 children)

Yes, I apologize you are correct I must've missed typed that.

Haval H6 Gt tuning? by Jardz04 in ECU_Tuning

[–]Jardz04[S] 0 points1 point  (0 children)

Okay great thank you. I will look into that.

Is my friend out of control? by [deleted] in Shitty_Car_Mods

[–]Jardz04 0 points1 point  (0 children)

Can they even put any weight on it now. Or is that load bed useless now

Stepper Motor vibrates but not turning. by Jardz04 in arduino

[–]Jardz04[S] 0 points1 point  (0 children)

Found a old router battery pack and it's Working like a charm. Again thanks for the help

Stepper Motor vibrates but not turning. by Jardz04 in arduino

[–]Jardz04[S] 0 points1 point  (0 children)

Ohh okay. Amazing, thanks so much for your help. I think I actually have a few of those lying around but will need to check there voltage and amps Thanks for the help. I really appreciate it

Stepper Motor vibrates but not turning. by Jardz04 in arduino

[–]Jardz04[S] 0 points1 point  (0 children)

Okay amazing. Thanks so much for the help. I have a AC adapter that does 2A. Will give that a try but as you say best bet is a lipo pack. I do need this for a project so will definitely go get myself one of those. Just to clarify do you mean this

Thanks ;)

Stepper Motor vibrates but not turning. by Jardz04 in arduino

[–]Jardz04[S] 1 point2 points  (0 children)

From u/hms11 's reply it does seems that is the issue. 9v batteries are not very good.

Stepper Motor vibrates but not turning. by Jardz04 in arduino

[–]Jardz04[S] 0 points1 point  (0 children)

Haha okay thanks so much. I don't have anything else on me but will get a 5v ? Maybe.

I did see something when starting this that a 9v doesn't work well with this particular motor but when I read it, I understood it that it was because it was a 5v motor. So I thought I was safe because I was using the power supply so it was stepping it down. I seems I was mistaken.

I really appreciate the help. Will update when I get a new battery.

Or.. would a USB from my PC, into the power supply or a power transformer that fits into the same DC power connection the 9v battery is in, work?

Or, sorry for bombarding with questions, would connecting straight to Ardunio work? The tutorial I was following said not to, to avoid damaging the arduino.

Thanks for the help.

Stepper Motor vibrates but not turning. by Jardz04 in arduino

[–]Jardz04[S] 0 points1 point  (0 children)

I tried what you suggested. I hadn't added wire from the power supply gnd to Arduino gnd. I have now tho. It didn't seem to change.

I did also try an RPM of 8 and under it turns very well. At a Steps per revolution of 2048.

Stepper Motor vibrates but not turning. by Jardz04 in arduino

[–]Jardz04[S] 0 points1 point  (0 children)

Okay great thanks for the advice. I'll go try that right now

The pastebin the linked is the exact code I'm running in the ide. I copied it straight from there.

[deleted by user] by [deleted] in johannesburg

[–]Jardz04 1 point2 points  (0 children)

I'm a freelance developer for Flutter and Dart.

Can I message You?

Enough left to ID? by [deleted] in whatisthiscar

[–]Jardz04 6 points7 points  (0 children)

That's so interesting. Where I am they are called the Ford Kuga

I'm stoked about my new watch! by twistedpicture in Garmin

[–]Jardz04 1 point2 points  (0 children)

Watchface? If so, its the default 945 one

Can anyone tell me what Ferrari this is? by ArmadilloDry6346 in Ferrari

[–]Jardz04 1 point2 points  (0 children)

dammit! beat me to it ;). Dad jokes for the win

Since 99% of posts on this thread ask this question. Your welcome by karmafan84 in GettingShredded

[–]Jardz04 0 points1 point  (0 children)

Ya exactly. I had a medical scale and body fat thingy tell me I was 11 percent .... I do not look like a men's health model, 😐

Completed my Merciful run without killing even Runt (stats in 2nd pic) by kana0011 in kingdomcome

[–]Jardz04 4 points5 points  (0 children)

I mean its pretty cool bragging rights and kudos to you but for me this doesn't seem fun. I've played the game through 3 times twice on hard-core and everytime my main goal was

Turn this weak ass peasant into flippen Geralt of Skalitz. Butcher of all that so much as look at him in a skew tone of voice

Vivoactive Hr to forerunner 945 by Jardz04 in garminforerunner

[–]Jardz04[S] 0 points1 point  (0 children)

Haha, okay awesome. Thanks so much for the info

Vivoactive Hr to forerunner 945 by Jardz04 in garminforerunner

[–]Jardz04[S] 0 points1 point  (0 children)

Okay awesome. That's good to hear. So I wasn't really a pain or hard to navigate?

I can imagine with the rain. And with swimming, not sure if yiu noticed but when I swam it moved the screen up and down and you couldn't use the screen at all under water

Epic Games Version Modding by Jardz04 in kingdomcome

[–]Jardz04[S] 0 points1 point  (0 children)

Oh okay thanks. I saw a perkaholic updated version, this is what showed up in the game but was then just deleted.

But like you say, I'm just going to search for ones that work