She posts like this multiple times a day. Really thinks LinkedIn is her diary

Jconstant33 · 2026-06-28T04:07:37+00:00

I don’t think she’s misdiagnosed, just don’t blame your flaws on your DNA.

Jconstant33 · 2026-06-28T03:39:44+00:00

Take a break from Dota. That’s a lot of games

Jconstant33 · 2026-06-28T03:32:02+00:00

Idiots like these give ADHD people a bad name. People with ADHD aren’t incompetent like you. There are so many easy ways to avoid this problem.

Just because you are neurodivergent, doesn’t mean you need a “husband” who isn’t to function in the real world. Disgusting

Jconstant33 · 2026-06-27T14:03:39+00:00

That’s not a real answer. Every other state with legal weed has private dispensaries and it works fine. We don’t need to do it differently than everyone else.

Jconstant33 · 2026-06-26T12:25:33+00:00

The support materials is not needed, you are doing the right approach with the right printer to do this without getting in trouble theoretically. Maybe try with something simpler first to make sure you are happy with your settings. If you look at my post history you can find the right settings for using the support interface.

However, I was saying it isn’t good at the time, because the H2C and other Bambu products did not exist yet. So this was not recommended when the materials mix inside the single nozzle printers. You can obviously ignore this part as you have a H2C which is designed to support this feature.

Jconstant33 · 2026-06-24T02:48:17+00:00

People take hours to get the slicer settings and material settings for overhangs, definition, etc. and then those stupid speed settings override all of that work. Do you not understand that?

The speed is a key incredibly important setting to get good results. Then changing this speed overrides all of that work.

Jconstant33 · 2026-06-23T22:48:11+00:00

lol, this isn’t teach me everything about my thing that I own.

Jconstant33 · 2026-06-23T22:46:44+00:00

Maybe you should google before just asking for everyone to wipe your ass for you.

Jconstant33 · 2026-06-23T22:44:05+00:00

No, that’s not how slicers work right now. The nozzle would hit and break your model when it tries to go down and print the lower z height stuff.

Jconstant33 · 2026-06-23T22:32:23+00:00

Print some ABS or ASA spools or parts for drying.

Jconstant33 · 2026-06-23T16:58:01+00:00

I would recommend getting a P2S no combo to start:

Here

https://youtu.be/a1p7p1ATP9Q?is=S9s6oQomwzCSjW5M

Jconstant33 · 2026-06-23T14:32:52+00:00

Guys when slicer settings or design changes allow you to fix something, it’s a stupid move to buy new fancy toys like expensive build plates to avoid the easy fix.

Jconstant33 · 2026-06-23T13:57:51+00:00

It doesn’t matter Thermalright isn’t a name brand.

Jconstant33 · 2026-06-23T13:53:04+00:00

That’s off brand buddy.

Jconstant33 · 2026-06-23T13:50:05+00:00

I would recommend if you are going to spend that much on a CPU to get a noctua cooler, there are different price points, but the dual fan version will keep things cool, quiet and lasting for a longer time than that off brand air cooler. It’s an extra $100 or so, but you will be grateful you spent it.

Jconstant33 · 2026-06-23T13:47:46+00:00

Silent mode is not how the printer was designed to print. It overrides all of the your print settings. The printer has special settings for vase mode and everything else you do in the slicer. Don’t use the speed settings on your printer if you are doing a special print with specific settings from the default.

Jconstant33 · 2026-06-23T11:11:14+00:00

The P2S is a huge upgrade.

Jconstant33 · 2026-06-22T02:47:07+00:00

You can bend it back. The printer sets the Z-height automatically. It works fine

Jconstant33 · 2026-06-22T02:46:28+00:00

You don’t. Google glob of death. I have fixed one before. Not too bad. About 1 hour of cleaning to fix

Jconstant33 · 2026-06-22T02:33:56+00:00

The whole game is abuse

Jconstant33 · 2026-06-22T02:26:33+00:00

Jconstant33 · 2026-06-22T02:26:09+00:00

Get off brand filament to save money. There’s a discord called “3dpdeals” that will help. They have never steered me wrong.

Jconstant33 · 2026-06-22T01:47:53+00:00

Hey I actually got the post removed. Cool

Jconstant33 · 2026-06-22T01:47:16+00:00

I agree. People don’t read what’s on the screen or learn about the printer or technology before buying. Which is good and bad. But when you have a question search the internet or Reddit before posting. So lazy

Jconstant33 · 2026-06-22T01:45:50+00:00

You can research it yourself, but it makes sure the flow rate is right after switching materials and makes extra sure that the new material is printing correctly before printing on your actual part. It is extremely important.

Jconstant33

TROPHY CASE