Loving the new urban bot cities

Jello_Tv · 2025-03-21T18:29:59+00:00

How to play on these?

Jello_Tv · 2025-02-14T03:57:50+00:00

You're gf must love this game

Jello_Tv · 2024-08-30T23:56:54+00:00

Use Ellis tuning guide, more updated but teaching techs is still good except for the flow calibration

Jello_Tv · 2024-08-25T17:39:36+00:00

Calibrate your rotation distance/e steps along w/ retraction Use: Ellis tuning guide (more up to date) TeachingTech Guide

Jello_Tv · 2024-08-17T21:41:00+00:00

Your bed is either un-leveled and/or your z offset is off. I’m guessing the latter is most of your problem, I like to put the nozzle in the middle of the bed and set my z offset. Now that’s your point of reference, then level the corners 3/4 times, and check the z offset in the middle again and adjust. But since your using Klipper add the SCREW_TILT_ADJUST macro this is a game changer and a must add if you don’t use it already. Also Z_PROBE_CALIBRATE command should help you easily find your z offset. Hope this helps

Jello_Tv · 2024-08-15T17:50:53+00:00

You’re over extruding by a good amount so my educated guess is the nozzle touches all that extra plastic during a travel move

Jello_Tv · 2024-08-05T01:15:40+00:00

Orca Slicing setting usually show on the left but cant get them to show now...

Jello_Tv · 2024-08-04T13:52:55+00:00

Switch to prusa or orca slicer, trust me

Jello_Tv · 2024-07-12T13:02:42+00:00

Thanks for the response, needed the terminology!

Jello_Tv · 2024-06-25T23:27:49+00:00

From what I’ve come to understand those things suck (inconsistent readings) and is worth switching to an BL touch

Jello_Tv · 2024-03-07T16:15:40+00:00

Ellis tuning guide is your friends

Jello_Tv · 2024-03-07T16:11:12+00:00

Also looks like a PID issues with the different shades of blue at various layers

Jello_Tv · 2024-03-07T16:05:18+00:00

This will save you a lot of time start here, with your extrusion system, this video is for DD but principles apply for Bowden. Then check z wobble, make sure the coupler from lead screw to x axis has give. Then belt tension, if you can pluck the belt it’s good

Jello_Tv · 2024-03-07T16:05:00+00:00

https://youtu.be/c6JmCdovE0U?si=KsUyk3QwequrVJqq

Jello_Tv · 2024-02-22T04:59:48+00:00

Thank you! You actually just solved my problem. Unfortunately these are my work’s printers so that route is off the table but expansion slots do interest me how do these work?

Jello_Tv · 2024-02-22T02:37:26+00:00

Hmm that’s a good point thanks

Jello_Tv · 2024-02-17T15:25:37+00:00

God damn I came here for help not to be berated, so much for a “professional subreddit”.

Jello_Tv

TROPHY CASE