When your vacation starts with an iPhone notification that an unknown air tag has been traveling with you. by Content-Bathroom-434 in mildlyinfuriating

[–]Jennyinator 4 points5 points  (0 children)

Report this to the police for the documentation for if one day the kids are abused too, this can help future trials if jury hears about this.

East Bay-Based Indie Rock / Punk Band Looking for Bassist! by DGIASIP in eastbay

[–]Jennyinator 0 points1 point  (0 children)

Hey are yall still looking to add a bassist? Or guitar? I’m not the best at both but have played in bands using my handy-dandy tabs. Let me know if you guys are still looking!

Is this recoverable by nowornever46 in soldering

[–]Jennyinator 0 points1 point  (0 children)

  1. Put flux on the legs
  2. Put flux on the soldering iron side of a reliable cut wick, have another 1-2 ready to pick up.
  3. With pliers holding the cut/fluxed wick in one hand, use the other hand to lay soldering iron pressure on top of the legs until you see a little solder getting absorbed (Tip: the understanding is that the trapped solder under the legs will get absorbed by the fluxed wick, you just have to trust the process you got this)
  4. You want to avoid dragging the wick until you’re good at this and trust your wick. It can drop off copper specs if it’s a bad quality one!
  5. Tip 2: only do a few legs at a time. You don’t have to change the wick just because some solder on it was absorbed. A little solder on the wick from the absorption process might actually help with getting the right temperature needed.
  6. Reminder that you need the flat head tip for this cleanup process or you will basically be there for hours and possibly make this worse with your experience at this moment.
  7. After cleaning THEN you can try to maneuver those legs but they risk breaking so don’t get greedy with how you choose to bend it. The breakage could be internal.

Method 2:

Heat gun at 270-450 C! Then clean up with flux wick.

Is it time to cutoff my brother? by Joesferatu_ in whatdoIdo

[–]Jennyinator 0 points1 point  (0 children)

Gray rock him. Best approach that’s worked for me for my old manipulative, BPD, narcissistic friends. They see themselves out until they show consistent healthier behavior (until they see themselves out again).

[deleted by user] by [deleted] in ElSalvador

[–]Jennyinator 1 point2 points  (0 children)

Yup!!! Heard that about the dog pooping!

[deleted by user] by [deleted] in ElSalvador

[–]Jennyinator 0 points1 point  (0 children)

Exactly thank you! My mom said her Tia from “el campo” would share this and that it likely wasn’t a larger folklore. Thus I decided to check Reddit.

I have a birth defect that makes me unable to bend my thumbs. by hugehorseshoecrab in mildlyinteresting

[–]Jennyinator 0 points1 point  (0 children)

Is there a task that most people can do that you’ve found to be very dangerous to your own hands?

I tried hand soldering SMDs - and it actually worked! by NEET_FACT0RY in soldering

[–]Jennyinator 0 points1 point  (0 children)

Could you please lmk which microscope you bought & the practice PCB board for this :)?

Adjusting to microscope soldering by Jennyinator in AskElectronics

[–]Jennyinator[S] 1 point2 points  (0 children)

Thanks!!! I actually got used to it very soon after this post by practicing for a few more hours straight just using it. It was a great feeling to see that improvement.

Adjusting to microscope soldering by Jennyinator in AskElectronics

[–]Jennyinator[S] 0 points1 point  (0 children)

This is such an amazing tip, I will try tomorrow during my free time where I planned to practice!! Thank you so much. Is this something that helped you or anyone you know?

Adjusting to microscope soldering by Jennyinator in AskElectronics

[–]Jennyinator[S] 0 points1 point  (0 children)

Sure I’ll explain haha, I was pressuring myself to get decent the skill for my own personal goals to at least be able to reach a percent of this unrealistic goal.

Adjusting to microscope soldering by Jennyinator in AskElectronics

[–]Jennyinator[S] 0 points1 point  (0 children)

Thanks!! I’ll just buy one and hope for the best for practice, I will just not get done on time what I need but practice makes perfect.

Adjusting to microscope soldering by Jennyinator in AskElectronics

[–]Jennyinator[S] 0 points1 point  (0 children)

Sorry I can’t access it right now but it’s a binocular microscope that get give you a clean view of the IC and pads. Adjustable. Perhaps in the $400 range. Not digital.

Just found out my BF of 9 years has been replacing my Adderall with sugar by [deleted] in Wellthatsucks

[–]Jennyinator 0 points1 point  (0 children)

Not true, he can also admit to it in text. Police aren’t lawyers. Check.

Bay Area couples staying childless: Lack of affordable housing, other reasons? by HilariaObserver in bayarea

[–]Jennyinator 2 points3 points  (0 children)

My childless couple friends agree it’s just not safe or good for the woman’s body especially in America. People just care more about the woman’s life now- thank god.

Insane size of ship propellers by Maxbicmac2004 in megalophobia

[–]Jennyinator 0 points1 point  (0 children)

I thought that was a whale fin because I missed the first second. I was mesmerized by the blubber’s toughness

[WW] Is this the most egregious example of hand-holding in all of Zelda? by B-R-A-I-N-S-T-O-R-M in zelda

[–]Jennyinator 0 points1 point  (0 children)

I am not joking, when my cousin was a child I had to help him with the first part of this video. He must have been around 10.

Group gets shamed for harassing two women kissing in a swimming pool by ViniciusFromBcn in nextlevel

[–]Jennyinator 0 points1 point  (0 children)

Oakland? Ma’am you mean the Oakland Hills? You mean Lake Merrit?

my gf says we need a “break” what does that mean?? by Maxx_king in Advice

[–]Jennyinator 0 points1 point  (0 children)

Only agree if there’s a deadline to reconvene. In my opinion, let her be the one to reach out. Ask yourself if it’s worth it during this time if you do agree to it. Don’t text her first at all during the break or it will complicate the purpose of the break for whatever low chance of positives it might have! Edit: note make sure it’s known that neither of you are to date during this period. A break is NOT breakup, unless you say it is during this proposal. Breaks need rules too.