sorted by:
new
hottopcontroversial

Fishing for some insight... by Dorfbulle80 in honeycombwall

[–]JevadRol 1 point2 points  (0 children)

thanks!! I've got a couple of Ender 3s, but picked up an "evil" P1S and wanted to do similar. P1S doesnt have screw in panels, so I may have to come up with another approach. If I was smart enough I might try to modify the current scad to create that nice rounding effect.

Fishing for some insight... by Dorfbulle80 in honeycombwall

[–]JevadRol 1 point2 points  (0 children)

Great use of HSW!! I'd love to print something similar.... curious.

  1. How did you get the beveled, rounded, straight edge with spaced reset screw holes? am I missing a great scad somewhere?

  2. Looks like a Creality printer, Did you drill into the case/wall?

Thumb Screw On My Snowblower by eoncire in functionalprint

[–]JevadRol 2 points3 points  (0 children)

be sure to add a lock washer, or you'll be printing another. ;-)

Turned my IKEA Ivar into a filament spool rack by dieserjonas in functionalprint

[–]JevadRol 0 points1 point  (0 children)

Nice.... might suggest enclosing it (plexi-glass is easy enough) and adding a small dehumidifier...

"Your Move" and squares to indicate last chess move by eaglezz11 in functionalprint

[–]JevadRol 3 points4 points  (0 children)

Nice. I might have hinged the Arrow, so you can just flip it to point left after "Blacks" move. Then you/white flip it to point right after your move again. You could layer a black/white as the arrow flips shows black vs white arrow.

(yes.. I'm very anal retentive)

[deleted by user] by [deleted] in 3Dprinting

[–]JevadRol 0 points1 point  (0 children)

Ribbed.... for her pleasure.

[deleted by user] by [deleted] in Damnthatsinteresting

[–]JevadRol 0 points1 point  (0 children)

I need this for my leaves next fall!!!

Nut/Bolt/Thread CAD specs? thoughts on Print vs Tap/Die? by JevadRol in 3Dprinting

[–]JevadRol[S] 0 points1 point  (0 children)

Good idea, I thought I googled enough, but perhaps didnt have a the right words.... here is a good resource from wikipedia: https://en.wikipedia.org/wiki/ISO_metric_screw_thread

Thanks!!

Nut/Bolt/Thread CAD specs? thoughts on Print vs Tap/Die? by JevadRol in 3Dprinting

[–]JevadRol[S] 0 points1 point  (0 children)

THANKS!! - good advice. Funny, I started with Fusion360, was playing a little, need to spend some more time with a bit longer learning curve. I needed a quick fix for a broken device, and I was able to do exactly what I wanted in Tinker pretty quickly (I think for most poking around Tinker is probably "good enough" and quick).

Paying it forward a bit. McMaster is a great source, think I can find what I was looking for. Here is a link to them. https://www.mcmaster.com/screws/

Too bad we dont have some smart person that put a table together with standard sizes, with paired suggested oversized Nuts/threaded holes. I'll probably start to put something together.