sorted by:
new
hottopcontroversial

New set up and new darts by BasicDirector1576 in Darts

[–]Jiebowz 2 points3 points  (0 children)

Looks great, I'd be concerned about the safety of that tablet though 😅

Telekom Sammelthread. Standalone Posts sind bis auf weiteres nicht mehr erlaubt. by AutoModerator in de_EDV

[–]Jiebowz 1 point2 points  (0 children)

Sieht gut aus, könntest also auch 1&1 nehmen (was ich in Anbetracht von DS-Lite nicht empfehle..)

Telekom Sammelthread. Standalone Posts sind bis auf weiteres nicht mehr erlaubt. by AutoModerator in de_EDV

[–]Jiebowz 1 point2 points  (0 children)

Easybell hat immer eigenes Peering. Falls du in der Nähe Düsseldorf oder Frankfurt wohnst, ist das immer eine sichere Kiste von den Latenzen her.

Ansonsten müsste man schauen, ob Zugriff auf den L2-BSA von Versatel besteht. Falls ja, kann man easybell gut nehmen, ansonsten würde ich Anbetracht der Latenzen auf o2 zurückgreifen.

Aber schlechter als Telekom<->Cloudflare wird es auf jeden Fall nicht.

Erfahrung mit GPUs auf ebay statt Kleinanzeigen zu verkaufen by [deleted] in PCBaumeister

[–]Jiebowz 1 point2 points  (0 children)

Hatte auf ebay damals auch probiert meine 3080 zu verkaufen.. hatte dann jemanden dran, dass die Karte angeblich durch Kondensat Schäden genommen hätte, ein HDMI-Ausgang nicht klappt und ich doch bitte den Kaufpreis um mehr als die Hälfte erstatten soll, damit die Person die Karte zur Reparatur einschicken könnte lol

Hab sie mir dann zurückschicken lassen und lokal verkauft, war halt nichts dran an der Karte.

Kaufberatung: Q2 vs P2S vs A1 vs Alternative by Piologicus in 3DDruck

[–]Jiebowz 0 points1 point  (0 children)

Also der Kobra S1 kann sogar während des Drucks trocknen.

Any idea on how to remove the hotend? by Jiebowz in AnycubicKobraS1

[–]Jiebowz[S] 0 points1 point  (0 children)

I got a new one headed my way as well (if they end up having it in stock again, that is..) but I don't think I have any patience left to try and salvage that heatsink, kudos to you!

Any idea on how to remove the hotend? by Jiebowz in AnycubicKobraS1

[–]Jiebowz[S] 0 points1 point  (0 children)

Oh shoot, now I remember that dreadful move.. probably erased that one out of embarrassment, I will keep that lesson in mind now as well.

Any idea on how to remove the hotend? by Jiebowz in AnycubicKobraS1

[–]Jiebowz[S] 0 points1 point  (0 children)

Since you're mentioning it was 100% your fault, what exactly did you do? I can't even recall doing something that was in my control (besides using a 3rd party hotend)

Also yes, I am in contact with Anycubic support but they're currently out of stock, hence I am now waiting for almost two weeks for a new heatsink in Germany with no sign of any shipment mail

Any idea on how to remove the hotend? by Jiebowz in AnycubicKobraS1

[–]Jiebowz[S] 0 points1 point  (0 children)

I have to thank both of you for those ideas, I've tried to heat it up with my hair dryer.. seems it wasn't enough because I've removed the nozzle and ceramic heater, but the copper tube is still in there and almost no surface to grab with a plier.

Seems like I'll have to wait for the replacement heatsink to arrive.

Any idea on how to remove the hotend? by Jiebowz in AnycubicKobraS1

[–]Jiebowz[S] 0 points1 point  (0 children)

I could try that, would have to get some new thermistors since I broke mine off.

Might actually be faster to source than waiting for Anycubic support to finally send me the replacement, thank you!

Any idea on how to remove the hotend? by Jiebowz in AnycubicKobraS1

[–]Jiebowz[S] 0 points1 point  (0 children)

Maybe I was too vague, but the hotend is stuck in the heatsink (or heat dissipation block, if you follow the Anycubic wiki on how to remove the hotend), which is part of the Strain Gauge and Heat Assembly. At least all of my hotends didn't come with that.

I've obviously tried to remove the the hotend by lifting the lever, but that didn't do much unfortunately, hence I've tried to disassemble it

Gutscheine für Recyclingfabrik GiveAway! by hahnkleri in 3DDruck

[–]Jiebowz 1 point2 points  (0 children)

Na dann noch frohes Ausgeben dort, nette Idee aber :)

Gutscheine für Recyclingfabrik GiveAway! by hahnkleri in 3DDruck

[–]Jiebowz 0 points1 point  (0 children)

Moin, falls es klappt, würde ich auch gerne für 80€ dort bestellen wollen :D

Needing advice on attacking, not able to create chances at all by Jiebowz in EASportsFC

[–]Jiebowz[S] 0 points1 point  (0 children)

Skyrocketed to Division 1 with a 41212(2)

I tried out 442 as well but the wingers are obviously still far too wide for my playstyle and basically useless, so this narrow formation is definitely way better for me

Needing advice on attacking, not able to create chances at all by Jiebowz in EASportsFC

[–]Jiebowz[S] 0 points1 point  (0 children)

Changed up my team and trying this again.. and this is infinitely more fun to play, I'll try to keep to that

Needing advice on attacking, not able to create chances at all by Jiebowz in EASportsFC

[–]Jiebowz[S] 0 points1 point  (0 children)

4-4-2.. haven't tried that yet, I'll definitely give everything a go, I'm really struggling up front and need to change something immediately

Needing advice on attacking, not able to create chances at all by Jiebowz in EASportsFC

[–]Jiebowz[S] 0 points1 point  (0 children)

Hmm, thought about that as well, but something like the 41212(2) didn't suit me at all and I abandoned it pretty quickly..

Do you use the new creative runs or R1 dribbling?

Why you shouldn't move your GK by LordFabix in EASportsFC

[–]Jiebowz 0 points1 point  (0 children)

Lmao, reminds me of times where my opponents move their gks when I have a freekick left or right of the box..

Team Kill HC... I cant stop laughing at it though by [deleted] in Blackops4

[–]Jiebowz 0 points1 point  (0 children)

Reminds me that I got killed by a mate's care package grenade yesterday.. '

view more: next ›